Holding Tools for I.D. Tuning (Applicable Tip Shape: D (55° Diamond-Shape))

• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning PDUNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	32 ～ 63	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  503.21 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN SL, 570-Type Cutting Head

  CoroTurnSL is a modular system of adapters and cutting heads that enables the construction of customised tools for a variety of turning operations with a minimum number of parts

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	50 ～ 80	Internal Diameter	Right-hand / Left-hand	-	32 ～ 40	-	40 ～ 60	-

  Ordinarie pris (exklusive MOMS):

  435.21 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDUCR / L-X

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	22 ～ 50	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	-	-	16 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  383.32 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SDUC-AE Type Excellent Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	27 ～ 32	Inner diameter profiling	Right-hand / Left-hand	Screw-on	200 ～ 250	7°	20 ～ 25	～5.5

  Ordinarie pris (exklusive MOMS):

  146.50 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-SDUC-A Type Steel Bar (Profile Machining)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	32	Inner diameter profiling	Right-hand	Screw-on	250	7°	25	Up to 4

  Ordinarie pris (exklusive MOMS):

  187.58 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E-SDUC-A Carbide Anti-Vibration Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	27 ～ 32	Inner diameter profiling	Right-hand	Screw-on	165 ～ 300	7°	20 ～ 25	~7

  Ordinarie pris (exklusive MOMS):

  530.94 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SDQC-AE Type Excellent Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	30	Inner diameter profiling	Left-hand	Screw-on	250	-	25	～5.5

  Ordinarie pris (exklusive MOMS):

  156.88 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-SDQC-A Type Steel Bar (Profile Machining)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	13	Inner diameter profiling	Left-hand	Screw-on	140	-	10	Up to 4

  Ordinarie pris (exklusive MOMS):

  86.50 €

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E-SDQC-A Carbide Anti-Vibration Bar (Profiling)

  [Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	13	Inner diameter profiling	Left-hand	Screw-on	160	-	10	~7

  Ordinarie pris (exklusive MOMS):

  237.29 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  A-SDZC-AE Excellent Bar (Boring)

  [Features] Machining applications: Inner diameter, through hole, drawing; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	23 ～ 32	Pull	Right-hand / Left-hand	Screw-on	180 ～ 250	7°	16 ～ 25	～5.5

  Ordinarie pris (exklusive MOMS):

  130.64 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S-SDZC-A Type Steel Bar (Draw Machining)

  [Features] Machining applications: Inside diameter, through hole, drawing; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	14 ～ 27	Pull	Right-hand / Left-hand	Screw-on	140 ～ 200	7°	10 ～ 20	Up to 4

  Ordinarie pris (exklusive MOMS):

  86.78 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  KYOCERA

  E-SDZC-A Carbide Anti-Vibration Bar (for Drawing)

  [Features] Machining applications: Inner diameter, through hole, drawing; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	27	Pull	Right-hand	Screw-on	250	7°	20	~7

  Ordinarie pris (exklusive MOMS):

  554.75 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  KYOCERA

  S...PDUN11 Type (Profiling)

  [Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamping method: pin lock (P).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	27 ～ 40	Inner diameter profiling	Right-hand	Lever lock	180 ～ 250	-	20 ～ 32	Up to 3

  Ordinarie pris (exklusive MOMS):

  140.38 €～

  Ordinarie avsändningsdatum:

  9 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN 107 Carbide Vibration-Proof Boring Bit for Positive Tips

  For turning slim parts with inner and outer diametersInsertion exchange with high repeatability improves productivity and achieves high quality

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	18	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	150 ～ 180	7°	12	120

  Ordinarie pris (exklusive MOMS):

  841.09 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SDUCR / L-R

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	15 ～ 22	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 200	7°	10 ～ 16	60 ～ 96

  Ordinarie pris (exklusive MOMS):

  476.57 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-ERX-R

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For back boring machining.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	22 ～ 27	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	200 ～ 250	7°	16 ～ 20	24～64 ～ 80

  Ordinarie pris (exklusive MOMS):

  208.98 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-X

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For back boring machining.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	33	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Screw-on	312.2	7°	25	15–40

  Ordinarie pris (exklusive MOMS):

  277.34 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR / L

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	20 ～ 32	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Screw-on	200 ～ 300	7°	16 ～ 25	64 ～ 100

  Ordinarie pris (exklusive MOMS):

  198.02 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDXCR / L

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	20 ～ 32	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	200 ～ 300	7°	16 ～ 25	64 ～ 100

  Ordinarie pris (exklusive MOMS):

  198.02 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L-ER

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	18 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 200	11°	12 ～ 16	18～48 ～ 24～64

  Ordinarie pris (exklusive MOMS):

  200.41 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SDUPR / L-ER

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	15 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 200	11°	10 ～ 16	60 ～ 96

  Ordinarie pris (exklusive MOMS):

  476.57 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER

  [Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations with longer protrusions. For suppressing chattering.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	15 ～ 18	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 180	11°	10 ～ 12	60–100 ～ 120

  Ordinarie pris (exklusive MOMS):

  842.30 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	15 ～ 32	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	125 ～ 300	11°	10 ～ 25	15–40 ～ 37.5～100

  Ordinarie pris (exklusive MOMS):

  200.41 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR / L

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	22	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Screw-on	204.6	11°	16	24～64

  Ordinarie pris (exklusive MOMS):

  200.41 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp, Diamond Shaped 55°

  [Features]An interchangeable-head-type cutting head for inner-diameter turning. The low cutting resistance ensures stable machining operations. For inner-diameter turning (bore cutting) operations.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	20 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	-	16 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  366.84 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL, 570 Type T-Max P, Head for Back Boring

  [Features]Cutting head for inner diameter turning with a replaceable head. Excellent insert clamping rigidity due to the double clamping. Quick head changes are possible, reducing downtime. Inner diameter turning operations.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	50	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Cable clamp	-	0°	40	20

  Ordinarie pris (exklusive MOMS):

  479.94 €

  Ordinarie avsändningsdatum:

  14 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DDXNR / L

  [Features]An interchangeable-head-type cutting head for inner diameter cutting. Being a double clamp gives it excellent insert-clamping rigidity. The heads can be quickly changed out, helping reduce down time. Inner-diameter turning (bore cutting) operations.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	40	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Cable clamp	-	0°	32	20

  Ordinarie pris (exklusive MOMS):

  462.06 €

  Ordinarie avsändningsdatum:

  14 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit T-Max P Lever Clamp S...-PDUNR / L

  [Features]An easy-handling inner-diameter boring tool bit with excellent repeatability. The use of internal coolant improves the handling of cutting chips and gives the inserts a longer service life. Supports inner-diameter turning (bore cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	32 ～ 63	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Lever lock	300 ～ 400	0°	25 ～ 50	100 ～ 200

  Ordinarie pris (exklusive MOMS):

  413.19 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max P Inner-Diameter Boring Bit PDUNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	32 ～ 63	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Lever lock	300 ～ 350	-	-	36 ～ 40

  Ordinarie pris (exklusive MOMS):

  647.31 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn HP SL Cutting Head PDUN

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	38 ～ 56	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Lever lock	32 ～ 36	-	25 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  546.81 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn HP SL Cutting Head, TR-SL-D13UCR / L-HP

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	40 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	38	-	32 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  568.60 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn HP SL Cutting Head, TR-SL-D13XCR / L-HP

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	45 ～ 50	Internal Diameter / Inner diameter profiling / Pull	Right-hand	Screw-on	22 ～ 27	-	32 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  568.60 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570 Type Cutting Head TR-SL-D13UCR / L

  [Features]SL couplingExtremely high clamp rigidityThe T-rail interface ensures minimal undercutting on the restraint surface, maintaining long-term machining precisionHigh-precision machiningFor profile turning.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	50	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	-	7°	40	32

  Ordinarie pris (exklusive MOMS):

  479.94 €

  Ordinarie avsändningsdatum:

  12 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDXCR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	22 ～ 50	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	-	-	16 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  383.32 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL Quick-Change Cutting Head 570-DDUNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	-	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Cable clamp	-	0°	80	-

  Ordinarie pris (exklusive MOMS):

  867.74 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL Quick-Change Cutting Head 570-DDUNR / L-X

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	-	Internal Diameter / Inner diameter profiling / Pull	Right-hand	Cable clamp	-	0°	80	-

  Ordinarie pris (exklusive MOMS):

  867.74 €

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL Quick-Change Cutting Head 570-SDUCR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	-	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	7°	80	-

  Ordinarie pris (exklusive MOMS):

  867.74 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL Quick-Change Cutting Head SL-SDUCR-X-QC

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	-	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	15	7°	32	-

  Ordinarie pris (exklusive MOMS):

  497.15 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning C3-SDUCR / L-X

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	22 ～ 32	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	-	7°	-	-

  Ordinarie pris (exklusive MOMS):

  503.21 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning SDUCR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	20 ～ 63	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	7°	-	-

  Ordinarie pris (exklusive MOMS):

  481.57 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 111, Screw Clamp, E.-SDUPR / L-ERX

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	22	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	200	11°	16	96

  Ordinarie pris (exklusive MOMS):

  812.02 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn 107 Cutting Head For Turning With High-Pressure Coolant Technology SL-SDUCR / L-HP

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	40 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	32	-	-	-

  Ordinarie pris (exklusive MOMS):

  544.15 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera