Filtreringsvillkor

Rensa alla

  • Lager
  • Tool Diameter(mm)
    [1.8-5/0.1mm units]
    [0.3-15.99/0.01mm units]
    [0.3-15.995/0.005mm units]
  • Groove Length(mm)
    [0.5-48/0.5mm units]
    [3-10/1mm units]
  • Groove Shape
  • Tip diameter
  • Large End Diameter
  • radius R
  • Reamers (3 sida)

    Reamers are a cutting tool used on drilled holes to refine them into the required hole-diameter precision and surface roughness while shaping them into true circles. Reamers are selected according to the precision of the hole as needed. They vary in hardness and size from the ones used to cut holes in parts of aircrafts to those used to manufacture musical instruments. Different reamers are selected based on their applications; hand reamers used for manual operation with handles attached to them, chucking reamers mounted to drill presses or NC machine tools for machining, machine reamers with longer cutter section than that of chucking reamers, taper reamers for finishing tapered drilled holes, bridge reamers used for correcting bolt holes, etc., when there is misalignment in them, and more. Their materials include high-speed steel or coated high-speed steel, carbide or coated carbide; reamer types vary according to the material of the parts for machining, machining method (manual or machine tool) and the cutting fluid types.
    • Straight Shank Spiral Chucking Reamer SPSCR
      • Volume Discount

      EIKOSHA

      Straight Shank Spiral Chucking Reamer SPSCR

      For General-Purpose Short blade, long shank, for deep hole finishing
      Mer information
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      1/2 ~ 25Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]20 ~ 65N/ASpiralN/A--
      Ordinarie pris (exklusive MOMS):
      83.88 €
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • Spiral Long Machine Reamer SPLMR

        EIKOSHA

        Spiral Long Machine Reamer SPLMR

        Long type deep hole used Morse taper shank
        Mer information
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        5 ~ 30Taper shankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]120 ~ 300N/ASpiralN/A--
        Ordinarie pris (exklusive MOMS):
        210.34 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Taper Pin Reamer for Machines TPRT

          EIKOSHA

          Taper Pin Reamer for Machines TPRT

          Morse Taper Shank for 1/50 Taper Pins
          Mer information
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          -Taper shankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]63 ~ 335N/AStraightN/A3 ~ 404.16 ~ 46.3
          Ordinarie pris (exklusive MOMS):
          104.06 €
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Spool Reamer SUR
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          EIKOSHA

          Spool Reamer SUR

          For Spool Mold Drilling
          Mer information
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          -End Mill ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]60 ~ 160N/ASpiralN/A2 ~ 10 3.04 ~ 37.99
          Ordinarie pris (exklusive MOMS):
          101.59 €
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara - 1 arbetsdag
          Vissa artiklar kan skickas samma dag
          Konfigurera
        • Morse Taper Reamer (For Hand Use) For Finishing MTR-F

            EIKOSHA

            Morse Taper Reamer (For Hand Use) For Finishing MTR-F

            For Morse Taper Hole (Finish)
            Mer information
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            -Straight ShankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]65 ~ 205N/AStraightN/A6.547 ~ 54.3889.93 ~ 65.076
            Ordinarie pris (exklusive MOMS):
            112.15 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Morse Taper Reamer (For Machine Use) For Rough Finishing MTRT-RF

              EIKOSHA

              Morse Taper Reamer (For Machine Use) For Rough Finishing MTRT-RF

              Morse Taper Shank For Morse Taper Hole (Rough Finish)
              Mer information
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              -Taper shankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]65 ~ 205N/AStraightN/A6.297 ~ 54.139.68 ~ 64.819
              Ordinarie pris (exklusive MOMS):
              130.66 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • Carbide Reamer CE Series (Formerly SH Series)
              • Volume Discount

              FPTOOLS

              Carbide Reamer CE Series (Formerly SH Series)

              Complete blind hole drilling is possible. Newly developed special blade coating. End mill shank is adopted.* Product name was changed from SH to CE. Although there is no change in the standards and price, the label of the delivered product may be that of the former SH series.
              Mer information
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              1 ~ 14.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]5 ~ 30AvailableSpiralAvailable--
              Ordinarie pris (exklusive MOMS):
              99.95 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • High Helical Reamer
              • KAMPANJFÖRSÄLJNING
              • Volume Discount

              FPTOOLS

              High Helical Reamer

              Made using cobalt HSS for even longer cutting life. Also effective with thermally refined materials of 40 HRC or less.
              Mer information
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              3.5 ~ 6.5Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎]22 ~ 35N/ASpiralN/A--
              Ordinarie pris (exklusive MOMS):
              29.65 €
              Ordinarie pris (exklusive MOMS):
              Specialpris
              Ordinarie avsändningsdatum:
              Lagervara - 1 arbetsdag
              Vissa artiklar kan skickas samma dag
              Konfigurera
            • Taper Pin Reamer (1 / 50) Straight Blade
              • KAMPANJFÖRSÄLJNING
              • Volume Discount

              FPTOOLS

              Taper Pin Reamer (1 / 50) Straight Blade

              Reamer used to make a bevel in a drilled hole when using a taper pin to cut work.
              Mer information
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              7End Mill ShankGeneral Steel[○] / Cast Iron[○] / Resin[○] / Die Steel[○] / Alloy Steel[○]117N/AStraightN/A6.99.24
              Ordinarie pris (exklusive MOMS):
              57.86 €
              Ordinarie pris (exklusive MOMS):
              Specialpris
              Ordinarie avsändningsdatum:
              Lagervara - 1 arbetsdag
              Skicka samma dag går att få
              Konfigurera
            • Straight Shank Chucking Reamer
              • Volume Discount

              FPTOOLS

              Straight Shank Chucking Reamer

              [Features] -The reamer expands the hole as the workpiece rotates during cutting.
              Mer information
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              1 ~ 14Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○]20 ~ 50N/AStraightN/A--
              Ordinarie pris (exklusive MOMS):
              98.40 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • Spiral Machine Reamer SPMR

                EIKOSHA

                Spiral Machine Reamer SPMR

                A spiral machine reamer. [Features] · Morse taper shank is adopted for machine use. · Adopts a torsion blade with excellent cutting powder discharge. [Applications] · For general purpose finishing.
                Mer information
                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                3 ~ 60Taper shankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35 ~ 190N/ASpiralN/A--
                Ordinarie pris (exklusive MOMS):
                102.44 €
                Ordinarie avsändningsdatum:
                6 arbetsdagar
                Konfigurera
              • Toglon® Hard Reamer ALT Coating

                  IWATA TOOL

                  Toglon® Hard Reamer ALT Coating

                  [Features]· HRC40-72 hardened steel can be machined.· 4-flute
                  Mer information
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  3 ~ 12End Mill ShankHigh Hardness Steel[○]40 ~ 70AvailableSpiralN/A--
                  Ordinarie pris (exklusive MOMS):
                  79.43 €
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Taper Pin Reamer
                  • KAMPANJFÖRSÄLJNING
                  • Volume Discount

                  MIERASEN

                  Taper Pin Reamer

                  [Features]· For taper pin hole finish.[Applications]· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.
                  Mer information
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  8Taper shankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○]-N/AStraightN/A--
                  Ordinarie pris (exklusive MOMS):
                  84.41 €
                  Ordinarie pris (exklusive MOMS):
                  Specialpris
                  Ordinarie avsändningsdatum:
                  Lagervara - 1 arbetsdag
                  Skicka samma dag går att få
                  Konfigurera
                • Handle Reamer

                    TRUSCO NAKAYAMA

                    Handle Reamer

                    [Characteristics] Has a gentle chamfer angle and four-cornered shank section, precisely finishing drilled holes or holes through which a rough ream has been put through. Although originally for hand-finishing, it can also be used for machine finishing at the final stage. [Application] Work Materials: Cast Iron, Carbon Steel, Alloy Steel, Tool Steel, Stainless Steel, Aluminum Alloy.
                    Mer information
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    1.8 ~ 5Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○]-N/AStraightN/A--
                    Ordinarie pris (exklusive MOMS):
                    33.64 €
                    Ordinarie avsändningsdatum:
                    6 arbetsdagar
                    Konfigurera
                  • Helix Reamer

                      TRUSCO NAKAYAMA

                      Helix Reamer

                      [Features]· Supports high-speed rotation unlike a hand reamer, and can therefore be used for difficult-to-cut materials. Counter-clockwise spiral, high-lead flute diameter. 60° torsion angle. [Applications]· Work material: Soft steel, general steel, stainless steel, cast iron, light alloy.
                      Mer information
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      6Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○]-N/ASpiralN/A--
                      Ordinarie pris (exklusive MOMS):
                      44.40 €
                      Ordinarie avsändningsdatum:
                      6 arbetsdagar
                      Konfigurera
                    • Taper Reamer
                      • KAMPANJFÖRSÄLJNING

                      SKC

                      Taper Reamer

                      A tapered reamer that can process from φ3 up to φ32.
                      Mer information
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      --General Steel[○]-N/AStraightN/A--
                      Ordinarie pris (exklusive MOMS):
                      13.20 €
                      Ordinarie pris (exklusive MOMS):
                      Specialpris
                      Ordinarie avsändningsdatum:
                      Lagervara - 1 arbetsdag
                      Skicka samma dag går att få
                      Konfigurera
                    • BR Bridge Reamer
                      • KAMPANJFÖRSÄLJNING
                      • Volume Discount

                      OKAZAKI SEIKO

                      BR Bridge Reamer

                      Used for large reamer allowances. Uses MCo material (cobalt high speed steel).
                      Mer information
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      14 ~ 32Morse Taper ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]110 ~ 190N/AStraightN/A10 ~ 26-
                      Ordinarie pris (exklusive MOMS):
                      101.84 €
                      Ordinarie pris (exklusive MOMS):
                      Specialpris
                      Ordinarie avsändningsdatum:
                      Lagervara - 1 arbetsdag
                      Vissa artiklar kan skickas samma dag
                      Konfigurera
                    • BCCR Carbide Chucking Reamer (Straight Shank)
                      • KAMPANJFÖRSÄLJNING
                      • Volume Discount

                      OKAZAKI SEIKO

                      BCCR Carbide Chucking Reamer (Straight Shank)

                      Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.
                      Mer information
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AStraightN/A--
                      Ordinarie pris (exklusive MOMS):
                      115.61 €
                      Ordinarie pris (exklusive MOMS):
                      Specialpris
                      Ordinarie avsändningsdatum:
                      Lagervara - 1 arbetsdag
                      Vissa artiklar kan skickas samma dag
                      Konfigurera
                    • BCER Reamer with Carbide Teeth (Straight Shank)

                        OKAZAKI SEIKO

                        BCER Reamer with Carbide Teeth (Straight Shank)

                        Tip brazing type, straight shank specification. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
                        Mer information
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/ASpiralAvailable--
                        Ordinarie pris (exklusive MOMS):
                        137.30 €
                        Ordinarie avsändningsdatum:
                        10 arbetsdagar
                        Konfigurera
                      • BCCRT Carbide Chucking Reamer (Morse Taper Shank)

                          OKAZAKI SEIKO

                          BCCRT Carbide Chucking Reamer (Morse Taper Shank)

                          Tip brazing type, Morse taper shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.
                          Mer information
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          12.5 ~ 30Morse Taper ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AStraightN/A--
                          Ordinarie pris (exklusive MOMS):
                          137.30 €
                          Ordinarie avsändningsdatum:
                          10 arbetsdagar
                          Konfigurera
                        • BCHR Carbide Helical Reamer (Straight Shank)

                            OKAZAKI SEIKO

                            BCHR Carbide Helical Reamer (Straight Shank)

                            Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling. The shape is left-torsion to provide excellent stability for machining of holes with notches (key grooves, etc.).
                            Mer information
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AHelicalN/A--
                            Ordinarie pris (exklusive MOMS):
                            124.74 €
                            Ordinarie avsändningsdatum:
                            8 arbetsdagar
                            Konfigurera
                          • CCR Carbide Chucking Reamer
                            • Volume Discount

                            OKAZAKI SEIKO

                            CCR Carbide Chucking Reamer

                            A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
                            Mer information
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            3 ~ 12Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/AStraightN/A--
                            Ordinarie pris (exklusive MOMS):
                            35.79 €
                            Ordinarie avsändningsdatum:
                            6 arbetsdagar
                            Konfigurera
                          • CCRM Carbide Chucking Reamer (Hundredths Range)
                            • Volume Discount

                            OKAZAKI SEIKO

                            CCRM Carbide Chucking Reamer (Hundredths Range)

                            A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
                            Mer information
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            2.95 ~ 12.05Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/AStraightN/A--
                            Ordinarie pris (exklusive MOMS):
                            37.91 €
                            Ordinarie avsändningsdatum:
                            10 arbetsdagar
                            Konfigurera
                          • With Carbide Teeth (and with Oil Hole)

                              OKAZAKI SEIKO

                              With Carbide Teeth (and with Oil Hole)

                              A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted. Shape with oil hole discharges cutting chips smoothly.
                              Mer information
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              5 ~ 12End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/ASpiralAvailable--
                              Ordinarie pris (exklusive MOMS):
                              116.61 €
                              Ordinarie avsändningsdatum:
                              10 arbetsdagar
                              Konfigurera
                            • CEORM Reamer with Carbide Teeth (and with Oil Hole) (Hundredths Range)

                                OKAZAKI SEIKO

                                CEORM Reamer with Carbide Teeth (and with Oil Hole) (Hundredths Range)

                                A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted. Shape with oil hole discharges cutting chips smoothly.
                                Mer information
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                4.95 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/ASpiralAvailable--
                                Ordinarie pris (exklusive MOMS):
                                135.08 €
                                Ordinarie avsändningsdatum:
                                10 arbetsdagar
                                Konfigurera
                              • CER Reamer with Carbide End Flutes
                                • Volume Discount

                                OKAZAKI SEIKO

                                CER Reamer with Carbide End Flutes

                                A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
                                Mer information
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                3 ~ 12End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 31N/ASpiralAvailable--
                                Ordinarie pris (exklusive MOMS):
                                104.53 €
                                Ordinarie avsändningsdatum:
                                10 arbetsdagar
                                Konfigurera
                              • CERM Reamer with Carbide Teeth (Hundredths Range)

                                  OKAZAKI SEIKO

                                  CERM Reamer with Carbide Teeth (Hundredths Range)

                                  A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
                                  Mer information
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  2.95 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 31N/ASpiralAvailable--
                                  Ordinarie pris (exklusive MOMS):
                                  112.18 €
                                  Ordinarie avsändningsdatum:
                                  10 arbetsdagar
                                  Konfigurera
                                • CERS Short Reamer with Carbide Teeth
                                  • Volume Discount

                                  OKAZAKI SEIKO

                                  CERS Short Reamer with Carbide Teeth

                                  A solid type. Carbide end blade reamer (CER/CERM) short type.
                                  Mer information
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  3 ~ 6End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]6 ~ 12N/ASpiralAvailable--
                                  Ordinarie pris (exklusive MOMS):
                                  30.79 €
                                  Ordinarie avsändningsdatum:
                                  8 arbetsdagar
                                  Konfigurera
                                • CHRS Short Carbide Helical Reamer
                                  • Volume Discount

                                  OKAZAKI SEIKO

                                  CHRS Short Carbide Helical Reamer

                                  A solid type. Carbide Helical Reamer (CHR/CHRM) Short Type
                                  Mer information
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  10End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]35N/AHelicalN/A--
                                  Ordinarie pris (exklusive MOMS):
                                  117.21 €
                                  Ordinarie avsändningsdatum:
                                  10 arbetsdagar
                                  Konfigurera
                                • CHRSM Short Carbide Helical Reamer (Hundredths Range)
                                  • Volume Discount

                                  OKAZAKI SEIKO

                                  CHRSM Short Carbide Helical Reamer (Hundredths Range)

                                  A solid type. Carbide Helical Reamer (CHR/CHRM) Short Type
                                  Mer information
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  2.95 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]22 ~ 35N/AHelicalN/A--
                                  Ordinarie pris (exklusive MOMS):
                                  33.68 €
                                  Ordinarie avsändningsdatum:
                                  7 arbetsdagar
                                  Konfigurera
                                • CR Chucking Reamer (Straight Shank)
                                  • Volume Discount

                                  OKAZAKI SEIKO

                                  CR Chucking Reamer (Straight Shank)

                                  Short blade type. A straight shank. Uses MCo material (cobalt high speed steel).
                                  Mer information
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  6Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]30N/AStraightN/A--
                                  Ordinarie pris (exklusive MOMS):
                                  66.45 €
                                  Ordinarie avsändningsdatum:
                                  6 arbetsdagar
                                  Konfigurera
                                • CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)
                                  • KAMPANJFÖRSÄLJNING
                                  • Volume Discount

                                  OKAZAKI SEIKO

                                  CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)

                                  A solid type. Ideal dimensions added (0 to 0.005 dimensional tolerance). 0.005 mm increments added (exact dimensions ±0.03).
                                  Mer information
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  0.99 ~ 7.44Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]12 ~ 35N/AStraightN/A--
                                  Ordinarie pris (exklusive MOMS):
                                  25.39 €
                                  Ordinarie pris (exklusive MOMS):
                                  Specialpris
                                  Ordinarie avsändningsdatum:
                                  Lagervara - 1 arbetsdag
                                  Vissa artiklar kan skickas samma dag
                                  Konfigurera
                                • LMR Long-Bladed Machine Reamer

                                    OKAZAKI SEIKO

                                    LMR Long-Bladed Machine Reamer

                                    Abundant variety of blade lengths. Ideal for deep drilling. Uses MCo material (cobalt high speed steel).
                                    Mer information
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    5 ~ 50Morse Taper ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]150 ~ 400N/AStraightN/A--
                                    Ordinarie pris (exklusive MOMS):
                                    167.59 €
                                    Ordinarie avsändningsdatum:
                                    7 arbetsdagar
                                    Konfigurera
                                  • MR Machine Reamer
                                    • Volume Discount

                                    OKAZAKI SEIKO

                                    MR Machine Reamer

                                    A wide variety of shank sizes are available. Cast iron and general steel hole finishing. Uses MCo material (cobalt high speed steel).
                                    Mer information
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    3 ~ 80Morse Taper ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]35 ~ 260N/AStraightN/A--
                                    Ordinarie pris (exklusive MOMS):
                                    80.21 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • SPHR Spiral Flute Hand Reamer
                                    • Volume Discount

                                    OKAZAKI SEIKO

                                    SPHR Spiral Flute Hand Reamer

                                    Cast iron and general steel hole finishing. Inch sizes are also available. Uses MCo material (cobalt high speed steel).
                                    Mer information
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    3 ~ 30Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]40 ~ 150N/ASpiralN/A--
                                    Ordinarie pris (exklusive MOMS):
                                    38.97 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • SSR Speed Reamer (Straight Shank)
                                    • Volume Discount

                                    OKAZAKI SEIKO

                                    SSR Speed Reamer (Straight Shank)

                                    Capable of high-speed rotation and high feeding. Special surface processing. Uses MCo material (cobalt high speed steel).
                                    Mer information
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    13Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]50N/ASpiralN/A--
                                    Ordinarie pris (exklusive MOMS):
                                    68.57 €
                                    Ordinarie avsändningsdatum:
                                    7 arbetsdagar
                                    Konfigurera
                                  • SSRT Speed Reamer (Morse Taper Shank)

                                      OKAZAKI SEIKO

                                      SSRT Speed Reamer (Morse Taper Shank)

                                      Capable of high-speed rotation and high feeding. Special surface processing. Uses MCo material (cobalt high speed steel).
                                      Mer information
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      10 ~ 50Morse Taper ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]45 ~ 105N/ASpiralN/A--
                                      Ordinarie pris (exklusive MOMS):
                                      101.84 €
                                      Ordinarie avsändningsdatum:
                                      10 arbetsdagar
                                      Konfigurera
                                    • NC Sensor Reamer (Morse Taper Shank)

                                        NIKKEN KOSAKUSHO

                                        NC Sensor Reamer (Morse Taper Shank)

                                        [Features] The surface is very rough and durable and coated with TiN.
                                        Mer information
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        3 ~ 50-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
                                        Ordinarie pris (exklusive MOMS):
                                        118.12 €
                                        Ordinarie avsändningsdatum:
                                        6 arbetsdagar
                                        Konfigurera
                                      • Tough Cut Skill Reamer (Morse Taper Shank)

                                          NIKKEN KOSAKUSHO

                                          Tough Cut Skill Reamer (Morse Taper Shank)

                                          Supports work materials such as hard-to-cut materials, die steel, tempered steel and more
                                          Mer information
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          3 ~ 60-General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-N/A----
                                          Ordinarie pris (exklusive MOMS):
                                          121.21 €
                                          Ordinarie avsändningsdatum:
                                          6 arbetsdagar
                                          Konfigurera
                                        • Broach Reamer (Morse Taper Shank)
                                          • Volume Discount

                                          NIKKEN KOSAKUSHO

                                          Broach Reamer (Morse Taper Shank)

                                          Equipped with high precision and heavy machinability, capable of machining at a speed almost equivalent to that of drilling
                                          Mer information
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          2.95 ~ 80-General Steel[○] / Cast Iron[○] / Alloy Steel[○]-N/A----
                                          Ordinarie pris (exklusive MOMS):
                                          56.02 €
                                          Ordinarie avsändningsdatum:
                                          6 arbetsdagar
                                          Konfigurera
                                        • Mill Reamer (Straight Shank)

                                            NIKKEN KOSAKUSHO

                                            Mill Reamer (Straight Shank)

                                            Excellent for machining non-ferrous materials and cast iron
                                            Mer information
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            2.95 ~ 20-General Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Heat-resistant alloy[○] / Alloy Steel[○]-N/A----
                                            Ordinarie pris (exklusive MOMS):
                                            135.29 €
                                            Ordinarie avsändningsdatum:
                                            6 arbetsdagar
                                            Konfigurera
                                          • Right Lead Radical Mill Reamer

                                              NIKKEN KOSAKUSHO

                                              Right Lead Radical Mill Reamer

                                              [Features] It uses tungsten carbide material with high hardness and is coated with TiCN2.
                                              Mer information
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              2.97 ~ 14.05-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
                                              Ordinarie pris (exklusive MOMS):
                                              303.44 €
                                              Ordinarie avsändningsdatum:
                                              6 arbetsdagar
                                              Konfigurera
                                            • Right Lead Radical Mill Reamer (with Oil Wheel)

                                                NIKKEN KOSAKUSHO

                                                Right Lead Radical Mill Reamer (with Oil Wheel)

                                                Right pitch for blind holes.The right spiral angle and oil hole forcibly evacuate chips.
                                                Mer information
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                6 ~ 14-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
                                                Ordinarie pris (exklusive MOMS):
                                                449.20 €
                                                Ordinarie avsändningsdatum:
                                                6 arbetsdagar
                                                Konfigurera
                                              • Lead for Blind Hole, NC Sensor Reamer (Straight Shank)
                                                • Volume Discount

                                                NIKKEN KOSAKUSHO

                                                Lead for Blind Hole, NC Sensor Reamer (Straight Shank)

                                                [Features] It can be used for machining full blind holes. [Features] It has a TiN coating.
                                                Mer information
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                2.97 ~ 20-General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-Available----
                                                Ordinarie pris (exklusive MOMS):
                                                143.65 €
                                                Ordinarie avsändningsdatum:
                                                6 arbetsdagar
                                                Konfigurera
                                              • Lead for Blind Hole, Tough Cut Skill (with Oil Wheel)
                                                • Volume Discount

                                                NIKKEN KOSAKUSHO

                                                Lead for Blind Hole, Tough Cut Skill (with Oil Wheel)

                                                The right-hand spiral angle and the oil hole ensure optimum chip removal.It has an oil hole.
                                                Mer information
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                6 ~ 14-General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Heat-resistant alloy[○] / Alloy Steel[◎]-N/A----
                                                Ordinarie pris (exklusive MOMS):
                                                260.72 €
                                                Ordinarie avsändningsdatum:
                                                6 arbetsdagar
                                                Konfigurera