Tooling-Related Equipment（Page 5）

?* Information on days to ship and prices

• 

  Chuck Wrench (For Collet Chuck)

  SHOWA TOOL

  Select to compare

  Configure now
  Starting from∗ ：	21.35 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Micro Seal Nut (For Mega Micro Chuck)

  BIG KAISER

  [Features]
  Mega micro seal nut for hole drills and mega micro chucks.

  Select to compare

  Configure now
  Starting from∗ ：	63.00 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Mega Torque Wrench (For Mega Chuck Series)

  BIG KAISER

  [Features]
  Mega torque wrench for mega chuck series.
  Equipped with torque limiter to protect equipment from machine over load.

  Select to compare

  Configure now
  Starting from∗ ：	275.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Mega Wrench (For Mega Chuck Series)

  BIG KAISER

  [Features]
  · Even tightening across entire nut periphery using a one-direction clutch.
  · Eliminates risk of the wrench coming off during work.

  Select to compare

  Configure now
  Starting from∗ ：	269.00 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Cleaning Quill

  GIGA SELECTION

  [Features]
  · Can be mounted to an existing machining center (BT/HSK holder type model with through coolant function)
  · Housed in a magazine, is only mounted to the main spindle by ATC when in use, and is removed in the same way
  · Head nozzle is variable from 0 to ±110° (stepless and fixed)
  · Equipped with a fixed bar inside the machine for varying the nozzle angle, and the angle of the arm can be changed automatically when spindle operation X, Y or Z are used so that the arm makes contact with the fixed bar
  · The tip nozzle can swing up to 110° on one side, allowing coolant to also be sprayed on the front side of the spindle
  · Directly mounted on the spindle so it turns when the spindle rotates, allowing repeated spraying via the XY axis
  · When using a horizontal machining center, chip removal is possible in an orthogonal direction with the nozzle at 90°
  · Can be used from the day it is mounted without adding any modifications to the machining center (adjust the nozzle angle manually)
  · Aim the coolant spray at flat sections, including the telescopic cover and machine cover inside the machining center, to provide effective machine maintenance
  · Can be used for many types of chip shapes if the tip nozzle is replaced with a straight or diffusion nozzle (R1/8)

  Select to compare

  Configure now
  Starting from∗ ：	804.41 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  250 Collet chuck key

  AMF

  Collet chuck key for collet chuck nuts (ER) to DIN 6499.
  Special steel, hardened and zinc-plated. With hole for hanging up. The product is available per 1 peace.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.10 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  250K Collet chuck key (mini)

  AMF

  Collet chuck key (Mini) for collet chuck nuts (ER).
  Special steel, hardened and blued. The product is available per 1 peace.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	43.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Height Master, Inch

  MITUTOYO

  This is a standard model with a digital display, that offers you the following benefits:
  - It gives you all the essential specifications required for a versatile height standard.
  - You can use it to calibrate and set height gauges and other measuring instruments.
  - Models have two measuring faces on the same level, one facing up and the other down.

  Select to compare

  Configure now
  Starting from∗ ：	3,730.26 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital Height Master

  MITUTOYO

  This is a standard model with a digital display, that offers you the following benefits:
  - It gives you all the essential specifications required for a versatile height standard.
  - You can use it to calibrate and set height gauges and other measuring instruments.
  - Models have two measuring faces on the same level, one facing up and the other down.

  Select to compare

  Configure now
  Starting from∗ ：	3,730.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Check Master, Inch

  MITUTOYO

  This Check Master allows you to test precision tool and coordinate measuring machines, and offers you the following benefits:
  - You can test the X, Y and Z-coordinate axes of precision tool machines and coordinate measuring machines.
  - It consists of rigidly clamped gauge blocks with a step of 10mm.
  - It is supplied in a fitted wooden case.

  Select to compare

  Configure now
  Starting from∗ ：	3,388.16 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Check Master

  MITUTOYO

  This Check Master allows you to test precision tool and coordinate measuring machines, and offers you the following benefits:
  - You can test the X, Y and Z-coordinate axes of precision tool machines and coordinate measuring machines.
  - It consists of rigidly clamped gauge blocks with a step of 10 mm.
  - It is supplied in a fitted wooden case.

  Select to compare

  Configure now
  Starting from∗ ：	3,388.16 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Adaptor,Carbon Fiber

  MITUTOYO

  Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up.

  Select to compare

  Configure now
  Starting from∗ ：	127.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adaptor, Stainless Steel, Conical Base

  MITUTOYO

  Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up. Stainless steel is the primary material of choice for high-strength precision components.

  Select to compare

  Configure now
  Starting from∗ ：	18.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adaptor, Stainless Steel

  MITUTOYO

  Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up. Stainless steel is the primary material of choice for high-strength precision components.

  Select to compare

  Configure now
  Starting from∗ ：	15.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adaptor, Ceramic

  MITUTOYO

  Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up. The very lightweight and extremely stiff character of ceramic materials and its low thermal expansion, makes it the ideal material. The brittle characteristic can protect probes from the effects of crash.

  Select to compare

  Configure now
  Starting from∗ ：	75.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adapter M5-M4 Stainless Steel

  MITUTOYO

  Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up.

  Select to compare

  Configure now
  Starting from∗ ：	22.50 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Taper cleaner morse taper (96630)

  NORELEM

  · For cleaning morse taper tool holders
  
  · High level of absorbency, no abrasive particles
  
  · Intermediate gaps for collecting dirt particles

  Select to compare

  Configure now
  Starting from∗ ：	12.64 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper cleaner short taper (96632)

  NORELEM

  · For cleaning short taper tool holders
  
  · High level of absorbency, no abrasive particles
  
  · Intermediate gaps for collecting dirt particles

  Select to compare

  Configure now
  Starting from∗ ：	19.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper cleaner hollow shank taper (96634)

  NORELEM

  · For cleaning short taper tool holders
  
  · High level of absorbency, no abrasive particles
  
  · Intermediate gaps for collecting dirt particles

  Select to compare

  Configure now
  Starting from∗ ：	77.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cylinder cleaner thermoplastic (96636)

  NORELEM

  · For cleaning cylindrical tool holders and drill holes of every kind
  
  · High level of absorbency, no abrasive particles

  Select to compare

  Configure now
  Starting from∗ ：	44.49 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cylinder cleaner two-piece thermoplastic (96638)

  NORELEM

  · For cleaning cylindrical tool holders and drill holes of every kind
  
  · Push to relax the cleaner
  
  · Release to tense the cleaner
  
  · High level of absorbency, no abrasive particles

  Select to compare

  Configure now
  Starting from∗ ：	60.54 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...