Registrera dig
1
Kategori
Se mer
Filtreringsvillkor

Rensa alla

  • Lager
  • Product Type
  • Brush Long(mm)
  • Outer Diameter(mm)
  • Wire diameter(mm)
  • Shaft Diameter(mm)
  • Tillverkare

    • Brushes with Shafts

    Shaft-mounted brushes are tools with a shaft that are mounted on electric tools and used for polishing, deburring, paint removal, and the like. They are used when polishing a work surface by hand. There are various brush tips, such as spiral brush, flat type brush, end brush, cup brush, and flower brush. Brush materials like wavy iron and brass are for deburring and rust removal, and stainless steel and the like is for polishing. There are many types of brush materials, which must be selected according to the application the brush is used for. It is most effective if the bristle tips of a brush with the shaft is pressed against the workpiece, so it is appropriate to cut the bristles to about 1 to 2 mm. Also, the tools that they can be attached to differ by shank diameter, so caution must be taken when using.
      236 poster
      * Information om dagar till leverans, fraktkostnader och priser
      Lista
      Foto
      Jämför specifikationer
    • 1
    • 2
    • 3
    • 4
    • 5
      • ...
      6
    • Nästa
      • Spiral Brush (for Motorized Use / Shaft Diam. 6 mm / Aramid Fiber)
        • Volume Discount

        TRUSCO NAKAYAMA

        Spiral Brush (for Motorized Use / Shaft Diam. 6 mm / Aramid Fiber)

        Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
        Torsional brush4010 ～ 320.26
        Ordinarie pris (exklusive MOMS):
        30.86 €～
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • Cylindrical Brush with Stainless Steel Wire Shaft (Caulking Type)

          MISUMI

          Cylindrical Brush with Stainless Steel Wire Shaft (Caulking Type)

          Optimal for narrow areas that cannot be polished with a wheel, cup brush, etc. [C-Value]
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          End Brush27160.36
          Ordinarie pris (exklusive MOMS):
          6.75 €
          Ordinarie avsändningsdatum:
          5 arbetsdagar
          Konfigurera
        • Industrial Brush Disk Center
          • Volume Discount

          OSBORN

          Industrial Brush Disk Center

          The proprietary high-carbon steel wire sustains a long lifetime with excellent safety and grind performance.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Wheel Brush-100 ～ 3000.5-
          Ordinarie pris (exklusive MOMS):
          71.09 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Industrial Brush "Corfill E Ring Lock"
          • Volume Discount

          OSBORN

          Industrial Brush "Corfill E Ring Lock"

          This material has silicone carbide abrasive grains embedded into a nylon filament. As the absorption rate is low, it can be used in the same manner in both wet and dry polishing.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Wheel Brush-38 ～ 63-6
          Ordinarie pris (exklusive MOMS):
          40.21 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Hex Shaft Wheel Wire Brush
          • Volume Discount

          H & H

          Hex Shaft Wheel Wire Brush

          For rust removal, base processing for plating paint/peeling/paint, deburring
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Wheel Brush-38 ～ 100-6.35
          Ordinarie pris (exklusive MOMS):
          8.42 €～
          Ordinarie avsändningsdatum:
          9 arbetsdagar
          Konfigurera
        • Hex Shaft Cap Wire Brush
          • Volume Discount

          H & H

          Hex Shaft Cap Wire Brush

          For brass and copper polishing, moire finishing of wooden products, and polished finish of alloy products
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Cup Type Brush-50 ～ 75-6.35
          Ordinarie pris (exklusive MOMS):
          17.36 €～
          Ordinarie avsändningsdatum:
          9 arbetsdagar
          Konfigurera
        • SUS304 Stainless Steel Cup Brush with Shaft
          • Volume Discount

          SUN POWER(TAIYO SHOKAI)

          SUS304 Stainless Steel Cup Brush with Shaft

          Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Cup Type Brush-40 ～ 750.36
          Ordinarie pris (exklusive MOMS):
          10.57 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Cylindrical Brush with Caulking Tying Type Stainless Steel Shaft
          • Volume Discount

          SUN POWER(TAIYO SHOKAI)

          Cylindrical Brush with Caulking Tying Type Stainless Steel Shaft

          The tube shape is useful for polishing tight places and corners that wheel and cup shapes can't polish.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          End Brush--0.36
          Ordinarie pris (exklusive MOMS):
          5.40 €～
          Ordinarie avsändningsdatum:
          10 arbetsdagar
          Konfigurera
        • Cylindrical Brush with Caulking Tying Type Nylon Shaft
          • Volume Discount

          SUN POWER(TAIYO SHOKAI)

          Cylindrical Brush with Caulking Tying Type Nylon Shaft

          The tube shape is useful for polishing tight places and corners that wheel and cup shapes can't polish.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          End Brush--0.56
          Ordinarie pris (exklusive MOMS):
          6.69 €
          Ordinarie avsändningsdatum:
          10 arbetsdagar
          Konfigurera
        • SUS304 Stainless Steel Tube Brush
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          SUN POWER(TAIYO SHOKAI)

          SUS304 Stainless Steel Tube Brush

          The tube cleaner brush is a powerful pipe cleaner that is attached to the tip of an electric tube cleaner to polish and clean the inside of pipes.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Torsional brush-10 ～ 1000.25 ～ 0.355 ～ 7
          Ordinarie pris (exklusive MOMS):
          7.93 €～
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara: 1 arbetsdag
          Vissa artiklar kan skickas samma dag
          Konfigurera
        • Nylon Tube Brush
          • KAMPANJFÖRSÄLJNING
          • Volume Discount

          SUN POWER(TAIYO SHOKAI)

          Nylon Tube Brush

          The tube cleaner brush is a powerful pipe cleaner that is attached to the tip of an electric tube cleaner to polish and clean the inside of pipes.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Torsional brush-10 ～ 1000.4 ～ 0.65 ～ 7
          Ordinarie pris (exklusive MOMS):
          6.91 €～
          Ordinarie pris (exklusive MOMS):
          Specialpris
          Ordinarie avsändningsdatum:
          Lagervara: 1 arbetsdag
          Vissa artiklar kan skickas samma dag
          Konfigurera
        • Miniature Spiral Brush
          • Volume Discount

          SUN POWER(TAIYO SHOKAI)

          Miniature Spiral Brush

          This spiral brush can be attached to the tip of an electric or compressed air cleaner to achieve miniature precision abrasion.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Spiral brush-2 ～ 100.11.1 ～ 4
          Ordinarie pris (exklusive MOMS):
          20.56 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Shaft Mounted Wheel Shaped Brush
          • Volume Discount

          SUN POWER(TAIYO SHOKAI)

          Shaft Mounted Wheel Shaped Brush

          This wheel-shaped shank brush is used for grinding off rust, sanding off primer, stripping paint, etc.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Wheel Brush-50 ～ 100-6
          Ordinarie pris (exklusive MOMS):
          8.14 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Wire Brush
          • Volume Discount

          NAKANISHI

          Wire Brush

          [Features]· High quality wire brush ideal for treating metal surfaces.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Wheel Brush1.5 ～ 125 ～ 25-2.34 ～ 3
          Ordinarie pris (exklusive MOMS):
          74.99 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Wheel Brush With Shaft (Shaft Diameter 6 mm) Stainless Steel Wire
          • Volume Discount

          LESSMANN

          Wheel Brush With Shaft (Shaft Diameter 6 mm) Stainless Steel Wire

          [Features] · Uses high quality wire material for excellent durability and long life. · Available in a wide range of sizes, suitable for various applications. [Applications] · Deburring and rust removal from metal products. · For removing color or rust, etc. · For processing welding joints.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Wheel Brush3 ～ 1920 ～ 700.2 ～ 0.36
          Ordinarie pris (exklusive MOMS):
          18.50 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Flat Miniature Shaft Mounted Brush (Shaft Diameter 3 mm)
          • Volume Discount

          LESSMANN

          Flat Miniature Shaft Mounted Brush (Shaft Diameter 3 mm)

          [Features]· Can be easily attached to electric tools, etc.· High grade wire material is used for exceptional durability and a long lifespan.[Applications]· Used for places requiring delicate polishing work such as the surfaces or grooved parts of small objects.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Mini Brush3 ～ 616 ～ 220.13
          Ordinarie pris (exklusive MOMS):
          9.45 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • GC Nylon Brush With Abrasive Grain, Wire Diameter [0.2 to 0.5 mm]
          • Volume Discount

          NAKANISHI

          GC Nylon Brush With Abrasive Grain, Wire Diameter [0.2 to 0.5 mm]【1 till 5 stycken】

          [Features]· A nylon brush containing abrasive grains suitable for deburring, polishing coating or adhesion surfaces and rust removal.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Flat brush / Cup Type Brush / End Brush-⌀5 ～ ⌀230.15 ～ 0.2 to 0.5⌀3.0
          Ordinarie pris (exklusive MOMS):
          65.44 €～
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • Metal Brush (Hard Steel Wire)
          • Volume Discount

          KURODA BRUSH

          Metal Brush (Hard Steel Wire)

          [Features]· Hardness is maintained by cold-rolling. [Applications]· Suited for deburring, rust removal, scale removal, paint peeling, etc.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Wheel Brush / Cup Type Brush / End Brush / Umbrella-shaped brush / Flower Type Brush / Bevel Type Brush2 ～ 12ø3.5 ～ ø8.50.1 ～ 0.153
          Ordinarie pris (exklusive MOMS):
          8.67 €～
          Ordinarie avsändningsdatum:
          11 arbetsdagar
          Konfigurera
        • Micro-Spiral Brush, Abrasive-Containing Nylon
          • Volume Discount

          MISUMI

          Micro-Spiral Brush, Abrasive-Containing Nylon

          The micro spiral brush is an extremely flexible elastic tool that enables deburring, polishing and edge finishing according to the shape of the part. It is also capable of deburring impossible with conventional deburring tools such as intersecting holes with complicated shapes and stepped drill holes, and providing uniform finish.
          Mer information
          Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
          Spiral brush252.70.33
          Ordinarie pris (exklusive MOMS):
          54.39 €
          Ordinarie avsändningsdatum:
          5 arbetsdagar
          Konfigurera
        • Cylindrical Brush with Steel Wire Shaft (Caulking Type)

            MISUMI

            Cylindrical Brush with Steel Wire Shaft (Caulking Type)

            Optimal for narrow areas that cannot be polished with a wheel, cup brush, etc. [C-Value]
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            End Brush27160.36
            Ordinarie pris (exklusive MOMS):
            5.40 €
            Ordinarie avsändningsdatum:
            5 arbetsdagar
            Konfigurera
          • Precision Brush
            • Volume Discount

            YANASE

            Precision Brush

            Brush materials such as iron, stainless steel, brass, tampico, or Unilon are available.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            End Brush-8-3
            Ordinarie pris (exklusive MOMS):
            6.60 €～
            Ordinarie avsändningsdatum:
            30 arbetsdagar
            Konfigurera
          • Wheel Brush WA
            • Volume Discount

            BURRTEC

            Wheel Brush WA

            An elastic tool for removing dirt adhered to the surface of products using a hammer effect. Features a long product life and does not damage base materials.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-125 ～ 2000.3 ～ 0.35-
            Ordinarie pris (exklusive MOMS):
            29.04 €～
            Ordinarie avsändningsdatum:
            11 arbetsdagar
            Konfigurera
          • Micro Spiral Brush (Nylon with Polishing Material)
            • Volume Discount

            BURRTEC

            Micro Spiral Brush (Nylon with Polishing Material)

            Pipe type which supports automation. U-turn type tip treatment, so it does not scratch the workpiece, and supports most small holes, from 1φ to 12φ.[Features]· The micro spiral brush supports automation, and saves labor significantly in post-processing treatment.· Pipe type which supports automation.· The tip is a U-turn type, helping prevent workpieces from becoming damaged.· Handles holes of most small diameters, from 1φ to 12φ.· Standardized product enables instant delivery, without waiting.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Spiral brush20 ～ 301 ～ 5.5-3
            Ordinarie pris (exklusive MOMS):
            46.09 €～
            Ordinarie avsändningsdatum:
            8 arbetsdagar
            Konfigurera
          • Bar Twister Stainless Steel
            • Volume Discount

            BURRTEC

            Bar Twister Stainless Steel

            Pipe type which supports automation. Achieves significant labor saving. Ideal for deburring cylinder inner surfaces, screw holes, pipe inner surfaces, cross holes, or curved surfaces.[Features]· Supports automatic operation and is available for instant delivery.· A very useful deep hole deburring brush.· Auto: A pipe type which supports automatic operation. Achieves significant labor saving.· Long: Total length 150 mm / 6φ to 14φ, total length 200 mm / 16φ to 24φ, usable for deep holes that previously could not be reached with standard products.· Speedy: Standardized products enable instant delivery, without waiting.· Material: Four types of brush materials that support various uses are available. (Nylon with abrasive particles, stainless steel, brass, nylon)
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Spiral brush50101.026
            Ordinarie pris (exklusive MOMS):
            19.92 €
            Ordinarie avsändningsdatum:
            9 arbetsdagar
            Konfigurera
          • Micro Spiral Brush (Brass)
            • Volume Discount

            BURRTEC

            Micro Spiral Brush (Brass)

            Pipe type which supports automation. U-turn type tip treatment, so it does not scratch the workpiece, and supports most small holes, from 1φ to 12φ.[Features]· The micro spiral brush supports automation, and saves labor significantly in post-processing treatment.· Pipe type which supports automation.· The tip is a U-turn type, helping prevent workpieces from becoming damaged.· Handles holes of most small diameters, from 1φ to 12φ.· Standardized product enables instant delivery, without waiting.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Spiral brush20 ～ 301.27 ～ 5.50.06 ～ 0.13
            Ordinarie pris (exklusive MOMS):
            57.16 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Micro Spiral Brush (Stainless Steel)
            • Volume Discount

            BURRTEC

            Micro Spiral Brush (Stainless Steel)

            Pipe type which supports automation. U-turn type tip treatment, so it does not scratch the workpiece, and supports most small holes, from 1φ to 12φ.[Features]· The micro spiral brush supports automation, and saves labor significantly in post-processing treatment.· Pipe type which supports automation.· The tip is a U-turn type, helping prevent workpieces from becoming damaged.· Handles holes of most small diameters, from 1φ to 12φ.· Standardized product enables instant delivery, without waiting.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Spiral brush20 ～ 501 ～ 81.023 ～ 6
            Ordinarie pris (exklusive MOMS):
            58.08 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • "Wire Wrapping Tool" (Shaft Diameter 3 mm)
            • Volume Discount

            NAKANISHI

            "Wire Wrapping Tool" (Shaft Diameter 3 mm)

            [Features]· A deburring tool with the displayed amount of piano wires bundled.· Featuring a shape with the resilience and rigidity of piano wire that can be used for deburring.[Applications]· Using the surface roughness of the piano wire, it is optimal for finishing aluminum and general metals/plastics.· For deburring of aluminum die-casting and various cast products.· Used for removing burrs after cutting and pressing.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Torsional brush-40.83
            Ordinarie pris (exklusive MOMS):
            38.24 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • "Inside Brush" (Shaft Diameter: 3 mm)
            • Volume Discount

            NAKANISHI

            "Inside Brush" (Shaft Diameter: 3 mm)

            [Applications]· Ideal for deburring cylinder inner surfaces, screw holes, pipe inner surfaces, cross holes, or curved surfaces.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Torsional brush / Spiral brush12 ～ 451.7 ～ 190.1 ～ 0.551.6 ～ 6
            Ordinarie pris (exklusive MOMS):
            26.19 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Steel Wire Gold Wheel Brush, W-6/-9E/-21
            • Volume Discount

            NARUTOYA

            Steel Wire Gold Wheel Brush, W-6/-9E/-21

            [Features]· Though a 0.3 mm wire (steel wire) is generally used, yellow stranded wire (brass plated wire) is used with emphasis placed on material quality. This wire doesn't bend easily, remains stable and improves polishing ability.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-125 ～ 2500.25 ～ 0.38-
            Ordinarie pris (exklusive MOMS):
            40.49 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Narutoya, Stainless Steel Wheel Brush, Double-Headed Grinders / Bench Grinders / Benchtop Electric Grinders, W-491
            • Volume Discount

            NARUTOYA

            Narutoya, Stainless Steel Wheel Brush, Double-Headed Grinders / Bench Grinders / Benchtop Electric Grinders, W-491

            [Features]· Resistant to acids and alkalis, high-temperature oxidation, safe up to 850°C, with excellent high-temperature strength.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-150 ～ 2500.3-
            Ordinarie pris (exklusive MOMS):
            75.21 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Steel Wire Saw Blade Wheel Brush
            • Volume Discount

            NARUTOYA

            Steel Wire Saw Blade Wheel Brush

            [Features]· Uses a wire diameter suitable for removing cutting chips attached to band saw, contour, and portable machine saw blade grooves.· Cold rolling has improved the product's hardness.[Applications]· Picks off chips adhered to the blade gullet.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-80 ～ 1000.2 ～ 0.3-
            Ordinarie pris (exklusive MOMS):
            12.62 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Industrial Brush "Ring Lock"
            • Volume Discount

            OSBORN

            Industrial Brush "Ring Lock"

            The proprietary high-carbon steel wire sustains a long lifetime with excellent safety and grind performance.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-32 ～ 760.15 ～ 0.356
            Ordinarie pris (exklusive MOMS):
            48.27 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Industrial Brush - Ruftuf
            • Volume Discount

            OSBORN

            Industrial Brush - Ruftuf

            Independently developed high carbon steel wire for a longer life and superior grinding strength. Knot-type (bundled wire) brush with a powerful cutting axis.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            End Brush-20 ～ 300.15 ～ 0.56
            Ordinarie pris (exklusive MOMS):
            53.67 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Wheel Brush (0.15 brass wire)
            • KAMPANJFÖRSÄLJNING
            • Volume Discount

            TRUSCO NAKAYAMA

            Wheel Brush (0.15 brass wire)

            [Features] - Brush shape is a disk type, with bristles extending radially outward. - Disk-shaped brush has 10 mm hole opened in the center, so mounting is possible if there is an axis of the same diameter on the machine or tool. [Applications] For deburring, polishing, or cleaning metals.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-32 ～ 1000.15-
            Ordinarie pris (exklusive MOMS):
            14.61 €～
            Ordinarie pris (exklusive MOMS):
            Specialpris
            Ordinarie avsändningsdatum:
            Lagervara: 1 arbetsdag
            Vissa artiklar kan skickas samma dag
            Konfigurera
          • Wheel Brush (0.3 steel wire)
            • Volume Discount

            TRUSCO NAKAYAMA

            Wheel Brush (0.3 steel wire)

            [Features] - Brush shape is a disk type, with bristles extending radially outward. - Disk-shaped brush has 10 mm hole opened in the center, so mounting is possible if there is an axis of the same diameter on the machine or tool. [Applications] For deburring, polishing, or cleaning metals.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-32 ～ 1000.3-
            Ordinarie pris (exklusive MOMS):
            11.00 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Wheel Brush (0.3 Stainless Steel Wire)
            • Volume Discount

            TRUSCO NAKAYAMA

            Wheel Brush (0.3 Stainless Steel Wire)

            [Features] - Brush shape is a disk type, with bristles extending radially outward. - Disk-shaped brush has 10 mm hole opened in the center, so mounting is possible if there is an axis of the same diameter on the machine or tool. [Applications] For deburring, polishing, or cleaning metals.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-32 ～ 1000.3-
            Ordinarie pris (exklusive MOMS):
            14.33 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Wheel Brush with Shaft (for Motorized Use / Shaft Diameter 6 mm / Round Shaft Type) (Steel Wire)
            • KAMPANJFÖRSÄLJNING
            • Volume Discount

            TRUSCO NAKAYAMA

            Wheel Brush with Shaft (for Motorized Use / Shaft Diameter 6 mm / Round Shaft Type) (Steel Wire)

            [Features] -Usable with commercially available electric drills. - An attached shaft allows easy attachment / replacement. [Applications] - Deburring of metal products, rust removing. - For electric drills and desktop drilling machines. (Use under maximum rotation)
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-32 ～ 1000.36
            Ordinarie pris (exklusive MOMS):
            11.95 €～
            Ordinarie pris (exklusive MOMS):
            Specialpris
            Ordinarie avsändningsdatum:
            Lagervara: 1 arbetsdag
            Vissa artiklar kan skickas samma dag
            Konfigurera
          • Mounted Wheel Brush, Stainless Steel (Shaft Length 35 mm)
            • Volume Discount

            TRUSCO NAKAYAMA

            Mounted Wheel Brush, Stainless Steel (Shaft Length 35 mm)

            [Features] Usable with commercially available electric drills. An attached shaft allows easy attachment / replacement. [Applications] - Stainless steel, aluminum polishing. For electric drills and desktop drilling machines. (Use under maximum rotation)
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-32 ～ 1000.36
            Ordinarie pris (exklusive MOMS):
            16.06 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Wheel Brush with Shaft (for Motorized Use / Shaft Diameter 6 mm / Round Shaft Type) (Brass)
            • KAMPANJFÖRSÄLJNING
            • Volume Discount

            TRUSCO NAKAYAMA

            Wheel Brush with Shaft (for Motorized Use / Shaft Diameter 6 mm / Round Shaft Type) (Brass)

            [Features] -Usable with commercially available electric drills. - An attached shaft allows easy attachment / replacement. [Applications] - For polishing of brass, copper, and alloy products. - For electric drills and desktop drilling machines. (Use under maximum rotation)
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-32 ～ 1000.156
            Ordinarie pris (exklusive MOMS):
            17.88 €～
            Ordinarie pris (exklusive MOMS):
            Specialpris
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Mounted Wheel Brush, Brass-Plated Steel Wire (Shaft Length 3 mm)
            • Volume Discount

            TRUSCO NAKAYAMA

            Mounted Wheel Brush, Brass-Plated Steel Wire (Shaft Length 3 mm)

            [Features] -Usable with commercially available electric drills. - An attached shaft allows easy attachment / replacement. [Applications] - Polishing of metal surfaces, rust removing, deburring, paint stripping. - For electric drills and desktop drilling machines. (Use under maximum rotation)
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-32 ～ 1000.256
            Ordinarie pris (exklusive MOMS):
            13.10 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Wheel Brush with Shaft (for Motorized Use / Shaft Diameter 6 mm / Round Shaft Type) (with Abrasive Granules)
            • Volume Discount

            TRUSCO NAKAYAMA

            Wheel Brush with Shaft (for Motorized Use / Shaft Diameter 6 mm / Round Shaft Type) (with Abrasive Granules)

            [Features] -Usable with commercially available electric drills. - An attached shaft allows easy attachment / replacement. [Applications] - Polishing of metal surfaces, rust removing, deburring, paint stripping. - For electric drills and desktop drilling machines. (Use under maximum rotation)
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-50 ～ 10016
            Ordinarie pris (exklusive MOMS):
            35.45 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Mounted Wheel Brush, Stainless Steel (Shaft Length 27 mm)
            • Volume Discount

            TRUSCO NAKAYAMA

            Mounted Wheel Brush, Stainless Steel (Shaft Length 27 mm)

            [Features] - Brush shape is a disk type, with bristles extending radially outward. - For use in the electric impact driver, it can be detached at the touch of a button. - Because of the stainless steel wire, rust on a metal surface less likely to occur. [Applications] -For deburring, polishing, or cleaning metals.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-32 ～ 1000.36.35
            Ordinarie pris (exklusive MOMS):
            17.77 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Wheel Brush with Shaft (Hexagonal Shaft Type, Steel Wire)
            • Volume Discount

            TRUSCO NAKAYAMA

            Wheel Brush with Shaft (Hexagonal Shaft Type, Steel Wire)

            [Features] - Brush shape is a disk type, with bristles extending radially outward. - For use in the electric impact driver, it can be detached at the touch of a button. [Applications] For deburring, polishing, or cleaning metals.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Wheel Brush-32 ～ 1000.36.35
            Ordinarie pris (exklusive MOMS):
            14.16 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • Flat buff (3 mm shaft diameter)
            • KAMPANJFÖRSÄLJNING
            • Volume Discount

            TRUSCO NAKAYAMA

            Flat buff (3 mm shaft diameter)

            [Features] - An attached shaft allows easy attachment / replacement. [Applications] - Chamois: Ideal for polishing mirrors and final polishing as it is made from deer skin with strong abrasive force. - Flannel: soft flannel laminated buff ideal for dusting and final polishing. - Tools used: variable speed type electric micro grinders.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Flat brush-20 ～ 23-3
            Ordinarie pris (exklusive MOMS):
            7.77 €～
            Ordinarie pris (exklusive MOMS):
            Specialpris
            Ordinarie avsändningsdatum:
            Lagervara: 1 arbetsdag
            Vissa artiklar kan skickas samma dag
            Konfigurera
          • Shafted Cup Brush, Maximum Operating Rotational Speed (Rpm): 3000
            • Volume Discount

            TRUSCO NAKAYAMA

            Shafted Cup Brush, Maximum Operating Rotational Speed (Rpm): 3000

            [Features] - Brush is cup-shaped, and has bristles extending to the bottom surface. - For use in the electric impact driver, it can be detached at the touch of a button. - Suitable for relatively large surface work. [Applications] For deburring, polishing, or cleaning metals.
            Mer information
            Product TypeBrush Long(mm)Outer Diameter(mm)Wire diameter(mm)Shaft Diameter(mm)
            Cup Type Brush-50 ～ 750.36.35
            Ordinarie pris (exklusive MOMS):
            18.46 €～
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
        • 1
        • 2
        • 3
        • 4
        • 5
          • ...
          6
        • Nästa

          • Kategorier som hör till Brushes with Shafts