GANTER Indexing Plungers（Page 2）

?* Information on days to ship and prices

• • Promotional pricing

  

  Indexing plungers, plunger conical

  GANTER

  Indexing plungers GN 817.5 allow highly accurate positioning, with the guidance made by the positioning bushings DIN 172 / DIN 179 with cylindrical bore. The actual indexing bore is fitted with positioning bushings GN 172.1 / GN 179.1 with conical bores.
  The conical shape of the indexing pin / the indexing bore makes the positioning virtually clearance-free and therefore highly precise.
  Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	35.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Plunger Stainless Steel

  GANTER

  Stainless Steel-Indexing plungers GN 608.5 are distinguished for their small dimensions.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	11.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, removable / removable, with or without rest position

  GANTER

  Indexing plungers GN 817.9 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
  If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
  The indexing plungers type C are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	14.82 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Stainless Steel / Plastic-knob / with rest position

  GANTER

  Stainless Steel-Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  Stainless Steel-Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	23.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel, with red knob

  GANTER

  Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	7.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, with rest position, Plunger Stainless Steel

  GANTER

  Indexing plungers GN 608.6 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  Indexing plungers GN 608.6 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	11.80 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Locking plungers, Plunger protruded

  GANTER

  If not operated, the plunger of the locking plungers GN 816 protrudes. To retract, move against the spring force and hold in the end position by turning by 90°.
  The shape of the cam curve secures the plunger against accidental operation.
  When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
  For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	19.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, covered indexing mechanism / with and without rest position

  GANTER

  Mini indexing plungers GN 822.6 are distinguished for their small dimensions.
  Based on the principle of the GN 822 mini indexing plungers, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	6.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, covered indexing mechanism, with red knob

  GANTER

  Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  With type C the knob can be turned by 30° and a notch keeps the knob in this position.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	5.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, open indexing mechanism, with red knob

  GANTER

  Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
  Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	5.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring latches with flange for surface mounting

  GANTER

  Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°.
  A lock notch will hold the latch in both positions.
  Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	15.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Cam action indexing plungers, without locking function

  GANTER

  For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
  When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	22.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers, removable / GN 817.8

  GANTER

  Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
  If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
  The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	17.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam action indexing plungers for welding

  GANTER

  Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
  The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	20.90 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Cam action indexing plungers with flange / SW, black, textured finish

  GANTER

  Cam action indexing plungers GN 612.10 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	10.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam action indexing plungers, Steel, without locking function

  GANTER

  For GN 721 cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
  When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	18.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Clamping indexing plungers with safety function

  GANTER

  Clamping indexing GN 7336.8 plungers are an advanced development of the GN 7336.7 clamping knobs with indexing plunger.
  Like the latter, they are used for positioning, securing and clamping adjusting elements at the same time. This configuration ensures that the indexing pin cannot be pulled from the indexing bore by turning the knurled knob, but only be deliberately pulling the handle (safety function).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	26.18 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Double ring spanner

  GANTER

  [Specifications]
  ・Type: 607.9
  
  Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.

  • Volume Discount

  Starting from∗ ：	3.16 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers for thin walled equipment

  GANTER

  Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.
  It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
  For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	17.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers for welding, without rest position

  GANTER

  Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings.
  The lug d2 is intended for positioning.
  The plastic knob with the in-moulded indexing pin is driven on after the welding process.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	14.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers with red knob

  GANTER

  Indexing plungers GN 817.1 (Type C) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	10.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Indexing plungers with rest position, Steel / Plastic knob

  GANTER

  Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
  A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	10.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers without thread, Steel / Plastic knob

  GANTER

  Indexing plungers GN 618 without thread are for applications where welding, resin bonding (Loctite) or clamping is favoured.
  Type G has been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), additional information can be submitted on request.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	8.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, Stainless Steel / plastic knob

  GANTER

  Type G or GK of the indexing plungers GN 613 have been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
  A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	11.28 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Stainless Steel / Plastic-knob / without rest position

  GANTER

  Stainless Steel-Indexing plungers GN 607 are distinguished for their small dimensions.
  The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	15.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel / Plastic-knob / with rest position

  GANTER

  Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	13.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel / Plastic-knob / without rest position

  GANTER

  Indexing plungers GN 607 are distinguished for their small dimensions.
  The extremely low lock nuts GN 909 enlarge the mounting options.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	10.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, Steel / Plastic-knob / with or without rest position

  GANTER

  Indexing plungers GN 817.1 (Type C) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	10.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Key for locking plungers / 816.1-10

  GANTER

  For locking plungers GN 816.1 with operation with key (Type B / BK) this key is required to move the plunger. Locking plungers Ø 6 and 8 have the same key GN 816.1-10.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	1.72 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Key for locking plungers / 816-10

  GANTER

  For locking plungers GN 816 with operation with key (Type B / BK) this key is required to move the plunger. Locking plungers Ø 6 and 8 have the same key GN 816-10.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	7.70 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Locking plungers, Plunger retracted

  GANTER

  If not operated, the plunger of the locking plungers GN 816.1 is retracted. To move out, move against the spring force and hold in the end position by turning by 90°.
  The shape of the cam curve secures the plunger against accidental operation.
  When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
  For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	19.92 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, covered indexing mechanism

  GANTER

  Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  With Type C the knob can be turned by 30° and a notch keeps the knob in this position.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	5.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Screw drivers for GN 613

  GANTER

  [Specifications]
  ・Type: 613.1
  
  Type G or GK of the GN 613 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob. The indexing plungers are designed such that the plunger set in the end position (spring is „on block“) can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	10.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring bolts, Stainless Steel / Plastic knob

  GANTER

  The plunger of the Stainless Steel-Spring bolts GN 313 does not protrude in the inoperative position.
  It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
  Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	13.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Cam action indexing plungers for welding

  GANTER

  Stainless Steel-Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
  The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	25.90 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Cam action indexing plungers, with locking function

  GANTER

  For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
  When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	22.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers / without rest position / GN 617

  GANTER

  The indexing plungers GN 617 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	19.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without rest position

  GANTER

  GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
  During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	4.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, flange surface mounting, right-angled the plunger

  GANTER

  [Specifications]
  ・Type: A. with pull ring
  
  With indexing plungers GN 722.5, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ZB and SW versions are designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments.

  • Volume Discount

  Starting from∗ ：	20.60 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers with red knob / GN 8170

  GANTER

  [Specifications]
  ・Type: B. without rest position, C. with rest position
  ・Material (Sealing ring): H. H-NBR
  
  Stainless steel indexing plungers GN 8170 are intended for use in hygienic areas and meet hygiene requirements on the knob side (front hygiene). Wipers between the knob and the guide as well as the sealing ring between the guide and the housing keep the locking mechanism on the knob side leak-tight. At the same time, the high surface quality (Ra < 0,8 um) and dead-space-free mounting prevent dirt from adhering and facilitate cleaning.

  • Volume Discount

  Starting from∗ ：	84.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers, Knob pin side Hygienic Design (full hygie

  GANTER

  [Specifications]
  ・Type: B. without rest position, C. with rest position
  ・Material: ST. Steel precision casting
  
  Stainless steel indexing plungers GN 8170 are intended for use in hygienic areas, and with their additional sealing nuts, they meet hygiene requirements on the knob and pin sides (complete hygiene). Wipers between knob and guide and between guide and pin as well as sealing rings on the guide and sealing nut keep the locking mechanism leak-tight. At the same time, the high surface quality (Ra < 0,8 um) and dead-space-free mounting prevent dirt from adhering and facilitate cleaning.

  • Volume Discount

  Starting from∗ ：	111.60 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spring latches for welding

  GANTER

  [Specifications]
  ・Type: A. Latch riveted. not removable, AU. Latch screwed. removable
  ・Material: ST. Steel precision casting
  
  With spring latches GN 722.1, the plunger pin is retracted over the curve of the guide by a 180° turn of the latch. The notch at the upper end of the curve causes the latch to be held in place if the plunger pin needs to be kept temporarily from protruding. The ST version is designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments.

  • Volume Discount

  Starting from∗ ：	12.72 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers for welding, removable / GN 722.4

  GANTER

  [Specifications]
  ・Type: A. with pull ring, A. with pull ring. mounted, AU. with pull ring. unmounted
  ・Material: A4. Stainless Steel precision casting
  
  With indexing plungers GN 722.4, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ST version is designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments.

  • Volume Discount

  Starting from∗ ：	26.48 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

Loading...