GANTER Clamping Levers

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Promotional pricing

Clamping levers with eccentrical cam with threaded stud, Lever zinc die casting

GANTER

Clamping levers with eccentrical cam GN 927 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
There are no loose components since they are all assembled and mounted in their correct order.
Type A has the following benefits:
The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
With these clamping levers with eccentrical cam GN 927, clamping forces of up to 8 kN can be reached.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.98 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Adjustable hand levers, Zinc die casting, with threaded stud steel

GANTER

Adjustable hand levers GN 300 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	4.72 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Clamping bolts, downward clamping, Steel

GANTER

Clamping bolts GN 918.2 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.
The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	48.80 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Adjustable hand levers, Zinc die casting, bushing steel

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	4.68 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Clamping levers with eccentrical cam with threaded stud, Lever steel

GANTER

Clamping levers with eccentrical cam GN 927.3 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
There are no loose components since they are all assembled and mounted in their correct order.
Type A has the following benefits:
The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
With these clamping levers with eccentrical cam GN 927.3, clamping forces of up to 8 kN can be reached.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	11.62 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Clamping levers with eccentrical cam, Lever Stainless Steel

GANTER

Stainless Steel-Clamping levers with eccentrical cam GN 927.5 with Stainless Steel-threaded stud are used for rapid clamping and releasing operations. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping position.
There are no loose components since they are all assembled and mounted in their correct order.
The salient points of type A are as follows:
The distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut.
This allows the max. clamping force to be set by a simple adjustment. In addition this also allows the choice of the preferred lever position in relation to the clamping lever pin.
With these Stainless Steel-Clamping levers with eccentrical cam GN 927.5 , thrusts of up to 8 kN can be reached.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.26 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Adjustable hand levers with increased clamping force

GANTER

Adjustable hand levers GN 300.4 are produced with a clamping area which is linked via a thrust ball bearing to the bush and screw respectively of the clamping lever. This has led to the following advantages:
- Doubled clamping force through vastly reduced friction.
- There is no movement on the contact area between adjustable hand lever and component which greatly reduces any marking on the clamping area.
- In addition a reduced creep factor has been achieved by the increased preload.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	29.80 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Clamping bolts, downward clamping, Stainless Steel

GANTER

Stainless Steel-Clamping bolts GN 918.7 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.
The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	83.52 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamping levers, Stainless Steel

GANTER

Clamping levers, Stainless Steel

Volume Discount

Starting from^∗ ：	9.54 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Adjustable Stainless Steel-Hand levers, threaded stud

GANTER

Adjustable hand levers GN 300.5 with full Stainless Steel-Handle, correspond to applications where "agressive" surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	15.48 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Double cam levers, Stainless Steel

GANTER

Stainless Steel-Double cam levers GN 917.1 are used for repositioning and clamping. The eccentrical cam has the advantage that the clamping force remains constant in every position of its travel and in addition is self arresting.
The dimension b2 is made to match the head size of swing bolts DIN 444 and swing nuts GN 444.2 respectively.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	77.82 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Clamping Levers with Eccentrical Cam, Lever / Stainless Steel / GN 927.5

GANTER

Clamping levers with eccentrical cam GN 927.5 with Stainless Steel-internal thread are used for rapid clamping and releasing operations. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping position.
There are no loose components since they are all assembled and mounted in their correct order.
The salient points of type A are as follows:
The distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut.
This allows the max. clamping force to be set by a simple adjustment. In addition this also allows the choice of the preferred lever position in relation to the clamping lever pin.
With these clamping levers with eccentrical cam GN 927.5, thrusts of up to 8 kN can be reached.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	12.36 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

T-Handles, Aluminium

GANTER

T-Handles GN 563.2 can be used as either operating handles or for clamping purposes, producing high clamping forces.
T-Handles are produced using a stamping process which yields a high density material of high strength and a smooth surface.
An original ELESA-Design, produced in metal with permission of ELESA s. p. a.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.76 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjustable hand levers for set collars (GN 311)

GANTER

For set collars of the standard families GN 706... and GN 707..., the adjustable hand levers GN 311 replace the hexagon socket screw DIN 912. That allows the set collars to be adjusted easily and quickly without tools.The table of dimensions of the set collars shows the corresponding hand lever for the respective set collar size d1.Under GN 706.4, semi-split set collars GN 706.2 are generally offered with clamping levers.

Volume Discount

Starting from^∗ ：	12.40 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Flat adjustable hand levers, zinc die casting, bushing steel (GN 302)

GANTER

Adjustable hand levers GN 302 have a straight lever, not inclined, being parallel to the clamping space.Adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

Volume Discount

Starting from^∗ ：	5.96 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Adjustable hand levers, straight lever

GANTER

Adjustable hand levers GN 302 have a straight lever, not inclined, being parallel to the clamping space.
Adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.82 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Adjustable hand levers, Zinc die casting, threaded stud Stainless Steel

GANTER

Adjustable hand levers GN 300.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Clamping bolts, upward clamping, Steel

GANTER

Clamping bolts GN 918.1 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the clamping bolt is self-arresting.
The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	48.80 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Double cam levers, Steel

GANTER

Double cam levers GN 917 are used for repositioning and clamping. The eccentrical cam has the advantage that the clamping force remains constant in every position of its travel and in addition is self arresting.
The dimension b2 is made to match the head size of swing bolts DIN 444 and swing nuts GN 444.2 respectively.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	52.60 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Eccentrical cams, radial clamping, Steel

GANTER

Eccentrical cams GN 918 allow the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. The cam not only has the advantage that the clamping effect is of the same magnitude over the whole of the clamping surface (i.e. in every angular position), but also that it is self-arresting in every position.
The ball lever is linked with the eccentric cam via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the "readjustment" of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the eccentric cam can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	54.30 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Stop locks

GANTER

Stop locks GN 720 may be used as stops and feature a high degree of stability.
The inside ball-spring latching mechanism has 4 latching positions at a distance of 90° each. Thanks to the bolt attachment using the countersunk screw, the latching position is freely selectable.
The bar is solid and may be machined, if required.
The countersunk screw is enclosed as part of the set.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	22.54 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Adjustable flat tension levers with tabbed bushing, Steel

GANTER

The overall height of flat tension levers GN 125 is reduced to a minimum.
As all other adjustable levers, they are ideal when-ever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	24.90 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjustable flat tension levers with threaded stud, Stainless Steel

GANTER

The overall height of Stainless Steel-Flat tension levers GN 125.5 is reduced to a minimum.
As all other adjustable levers, they are ideal whenever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	35.94 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Adjustable flat tension levers with threaded stud, Steel

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	25.16 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Adjustable Stainless Steel-Hand levers, threaded stud, electropolished

GANTER

Adjustable hand levers GN 300.6 with full Stainless Steel-Handle, correspond to applications where "agressive" surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	19.02 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamping levers, Steel

GANTER

The official DIN standard sheet specifies additional sizes 40 - M5 / B5.

Volume Discount

Starting from^∗ ：	6.48 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Eccentrical cams, radial clamping, Stainless Steel

GANTER

Eccentrical cams GN 918.5 allow the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. The cam not only has the advantage that the clamping effect is of the same magnitude over the whole of the clamping surface (i.e. in every angular position), but also that it is self-arresting in every position.
The ball lever is linked with the eccentric cam via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the "readjustment" of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the eccentric cam can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	80.88 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Clamp nuts with double lever

GANTER

Stainless Steel-Clamp nuts with double lever

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	12.82 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Clamping levers with eccentrical cam

GANTER

Stainless Steel-Clamping levers with eccentrical cam GN 927.7 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
There are no loose components since they are all assembled and mounted in their correct order.
Type A has the following benefits:
The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
With these clamping levers with eccentrical cam GN 927.7, clamping forces of up to 8 kN can be reached.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	21.02 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Flat adjustable hand levers, Zinc die casting, threaded stud Stainless Steel (GN302.1)

GANTER

Adjustable hand levers GN 302.1 have a straight lever, not inclined, being parallel to the clamping space.Adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

Volume Discount

Starting from^∗ ：	8.86 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjustable hand levers releasing button, zinc die casting, threaded stud st

GANTER

Volume Discount

Starting from^∗ ：	9.90 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Adjustable hand levers, Zinc die casting, threaded stud Stainless Steel

GANTER

Volume Discount

Starting from^∗ ：	4.86 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Adjustable hand levers, Zinc die casting, bushing steel

GANTER

Volume Discount

Starting from^∗ ：	5.02 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Adjustable clamping levers, Steel

GANTER

Adjustable clamping levers GN 6337.3 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is required. The insert is connected by the lever via serrations in the ball bore which can be disengaged.

Pushing the lever down, disengages the serrations and the lever can be swivelled to the ideal clamping position. Engagement is achieved by releasing the lever.
Should a rotation of 360° not be possible, the insert can be lightly screwed in (after the lever is disengaged) via a slot in the knurled screw.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	15.56 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Adjustable clamping levers, Steel

GANTER

Adjustable clamping levers GN 99.2 are known for their small dimensions.
They are for use in applications where either the clamping range is limited or where a specific lever position is required. The serrated bore in the spherical hub is fitted with a threaded bolt insert which engages in the hub with its own serrations.
By depressing the clamping lever the serrations are disengaged freeing it for re-positioning in the most convenient position. When releasing the lever the serrations will re-engage automatically.
Should a rotation of 360° not be possible the insert can be slightly screwed in (after the lever has been disengaged) by means of the slotted knurled screw.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	17.40 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjustable flat tension levers with tabbed stud, Stainless Steel

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	35.52 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Adjustable hand levers with special tipped threaded studs

GANTER

Adjustable hand levers GN 306 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever disengages the serrations, allowing it to be swivelled to the ideal clamping position. When the lever is released, the serrations
automatically re-engage.
The brass and plastic tipped studs (Types MS / KU) help to avoid damage to the work piece being clamped.
The hardened tipped stud (Type DZ) provides an oval point-shaped pressure point.
The swivel thrust pad (Type KD) can easily be snapped on and taken off.
Pad is supplied unmounted.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	8.28 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Adjustable hand levers, Internal parts Stainless Steel

GANTER

Adjustable hand levers GN 303.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be dis-engaged.
The push button is a design element that offers an easy disengagement. Its use is limited to applications where dismantling of the lever for installation is not required.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	10.88 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjustable hand levers, Zinc die casting

GANTER

Adjustable hand levers GN 303 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be dis-engaged.
The push button is a design element that offers an easy disengagement. Its use is limited to applications where dismantling of the lever for installation is not required.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.74 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Adjustable hand levers, Zinc die casting, Bushing, Stainless Steel

GANTER

Adjustable hand levers GN 300.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.

Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Adjustable Stainless Steel-Hand levers, threaded bushing

GANTER

Adjustable hand levers GN 300.5 with full Stainless Steel-Handle, correspond to applications where „agressive“ surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.96 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjustable Stainless Steel-Hand levers, threaded bushing, electropolished

GANTER

Adjustable hand levers GN 300.6 with full Stainless Steel-Handle, correspond to applications where „agressive“ surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	18.38 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Ball levers, Steel

GANTER

The official DIN standard sheet specifies additional sizes 200 - M24 / B24.

Volume Discount

Starting from^∗ ：	9.82 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Clamp nuts with double lever, Steel

GANTER

Clamp nuts with double lever, Steel

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	6.82 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Clamp nuts, Steel

GANTER

Clamp nuts, Steel

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	3.82 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Application
Type Clamp
Type operation
Operation Direction
Shape
L-Shaped Clamp Lever Shape
Lever Shape with Knob
Mounting Section Type
Rotating Radius R(mm)
Main Body Material
Main Body Surface Treatment
Mounting Section Material
Mounting Section Surface Treatment
Knob Material
Surface Treatment of knob
Adjustment screw for gap
Mounting Section Diameter d(mm) and/or Diameter
Mounting Section Length L(mm)
Mounting Section Diameter C(mm)
Mounting Section Thickness h(mm)

	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing		Promotional pricing		Promotional pricing	Promotional pricing		Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing			Promotional pricing	Promotional pricing		Promotional pricing	Promotional pricing		Promotional pricing		Promotional pricing	Promotional pricing					Promotional pricing		Promotional pricing	Promotional pricing		Promotional pricing	Promotional pricing		Promotional pricing	Promotional pricing	Promotional pricing
Brand	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Product Series	Clamping levers with eccentrical cam with threaded stud, Lever zinc die casting	Adjustable hand levers, Zinc die casting, with threaded stud steel	Clamping bolts, downward clamping, Steel	Adjustable hand levers, Zinc die casting, bushing steel	Clamping levers with eccentrical cam with threaded stud, Lever steel	Clamping levers with eccentrical cam, Lever Stainless Steel	Adjustable hand levers with increased clamping force	Clamping bolts, downward clamping, Stainless Steel	Clamping levers, Stainless Steel	Adjustable Stainless Steel-Hand levers, threaded stud	Double cam levers, Stainless Steel	Clamping Levers with Eccentrical Cam, Lever / Stainless Steel / GN 927.5	T-Handles, Aluminium	Adjustable hand levers for set collars (GN 311)	Flat adjustable hand levers, zinc die casting, bushing steel (GN 302)	Adjustable hand levers, straight lever	Adjustable hand levers, Zinc die casting, threaded stud Stainless Steel	Clamping bolts, upward clamping, Steel	Double cam levers, Steel	Eccentrical cams, radial clamping, Steel	Stop locks	Adjustable flat tension levers with tabbed bushing, Steel	Adjustable flat tension levers with threaded stud, Stainless Steel	Adjustable flat tension levers with threaded stud, Steel	Adjustable Stainless Steel-Hand levers, threaded stud, electropolished	Clamping levers, Steel	Eccentrical cams, radial clamping, Stainless Steel	Stainless Steel-Clamp nuts with double lever	Stainless Steel-Clamping levers with eccentrical cam	Flat adjustable hand levers, Zinc die casting, threaded stud Stainless Steel (GN302.1)	Adjustable hand levers releasing button, zinc die casting, threaded stud st	Adjustable hand levers, Zinc die casting, threaded stud Stainless Steel	Adjustable hand levers, Zinc die casting, bushing steel	Adjustable clamping levers, Steel	Adjustable clamping levers, Steel	Adjustable flat tension levers with tabbed stud, Stainless Steel	Adjustable hand levers with special tipped threaded studs	Adjustable hand levers, Internal parts Stainless Steel	Adjustable hand levers, Zinc die casting	Adjustable hand levers, Zinc die casting, Bushing, Stainless Steel	Adjustable Stainless Steel-Hand levers, threaded bushing	Adjustable Stainless Steel-Hand levers, threaded bushing, electropolished	Ball levers, Steel	Clamp nuts with double lever, Steel	Clamp nuts, Steel
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D			2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D					2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D
Starting from^∗	9.98 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	4.72 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	48.80 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	4.68 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	11.62 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.26 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	29.80 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	83.52 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.54 € *Unit price with basic configuration Volume Discount	15.48 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	77.82 € *Unit price with basic configuration Volume Discount	12.36 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.76 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	12.40 € *Unit price with basic configuration Volume Discount	5.96 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.82 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.46 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	48.80 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	52.60 € *Unit price with basic configuration Volume Discount	54.30 € *Unit price with basic configuration Volume Discount	22.54 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	24.90 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	35.94 € *Unit price with basic configuration Volume Discount	25.16 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	19.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.48 € *Unit price with basic configuration Volume Discount	80.88 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	12.82 € *Unit price with basic configuration Volume Discount	21.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	8.86 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.90 € *Unit price with basic configuration Volume Discount	4.86 € *Unit price with basic configuration Volume Discount	5.02 € *Unit price with basic configuration Volume Discount	15.56 € *Unit price with basic configuration Volume Discount	17.40 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	35.52 € *Unit price with basic configuration Volume Discount	8.28 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.88 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.74 € *Unit price with basic configuration Volume Discount	7.46 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.96 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	18.38 € *Unit price with basic configuration Volume Discount	9.82 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.82 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	3.82 € Special price *Unit price with basic configuration Promotional pricing Volume Discount
Min. Shipping Days ：	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	7 Days	Same day	7 Days	Same day	Same day	7 Days	Same day	Same day	Same day	Same day	7 Days	7 Days	Same day	Same day	7 Days	Same day	Same day	7 Days	Same day	7 Days	Same day	Same day	7 Days	7 Days	7 Days	7 Days	Same day	7 Days	Same day	Same day	4 Days	Same day	Same day	7 Days	Same day	Same day	Same day
Application	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Type Clamp	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Type operation	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Operation Direction	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shape	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
L-Shaped Clamp Lever Shape	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lever Shape with Knob	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Section Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Rotating Radius R(mm)	63 ～ 101	30 ～ 108	-	30 ～ 108	63 ～ 101	63 ～ 101	63 ～ 108	-	50 ～ 125	30 ～ 92	-	63 ～ 101	-	30 ～ 45	30 ～ 78	30 ～ 78	30 ～ 108	-	-	-	-	-	-	-	30 ～ 92	50 ～ 200	-	-	63 ～ 101	30 ～ 78	-	-	-	-	-	-	30 ～ 63	30 ～ 78	30 ～ 78	30 ～ 108	30 ～ 92	30 ～ 92	63 ～ 160	-	63 ～ 160
Main Body Material	-	-	-	-	-	-	-	-	Stainless Steel	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Main Body Surface Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Section Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Section Surface Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Knob Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Surface Treatment of knob	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Adjustment screw for gap	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Section Diameter d(mm) and/or Diameter	-	-	-	4 ～ 16	-	-	6 ～ 12	-	6 ～ 8	3 ～ 12	-	5 ～ 10	-	4 ～ 6	5 ～ 12	-	3 ～ 16	-	-	-	6 ～ 8	-	-	-	3 ～ 12	20	-	-	5 ～ 10	4 ～ 12	-	-	-	-	-	-	-	-	-	3 ～ 16	3 ～ 12	3 ～ 12	-	-	-
Mounting Section Length L(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	12 ～ 80	12 ～ 80	-	-	-	-	-	-	-	-	-	20 ～ 80	20 ～ 80	-	-	-	-	-	-	-	-	-	-
Mounting Section Diameter C(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Section Thickness h(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Application
- Clamp
- Operation
- Related Components
Clear

Type Clamp
- Clamp Mechanism
- Cam Mechanism
- Ratchet mechanism
Clear

Type operation
- N/A
- Latch mechanism
Clear

Operation Direction
- Vertical
- Horizontal
Images

Clear

Shape
- L-Shaped
- T-Shaped
- Y Shaped
- Shape with Knob
- Without Knob
- Other
Images

Clear

L-Shaped Clamp Lever Shape
- Set Screw Type
- Push Button Type
- No Set Screw
Images

Clear

Lever Shape with Knob
- Grip Ball
- Single lever
- Double Lever
Images

Clear

Mounting Section Type
- Male thread
- Female Thread
- Round Hole
- Square Hole
Clear

Rotating Radius R(mm)
25

26

30

33.5

36.2

39

39.9

40

40.1

42

43

44

45

46.5

47.5

47.9

48

50

52.3

55

59.5

60

62

63

63.5

64

64.5

64.9

65

65.2

67

68

70

70.4

71.5

74

75

75.5

76

78

78.5

79

79.5

80

80.2

80.3

81

81.1

82

83

84

84.5

85

87

88

88.1

88.5

89

90

92

93

94.5

95

95.4

96

96.8

97

99

99.9

100

101

102

104

106

108

109

109.9

110

110.9

111

114

115

118

119

120

121

123

123.5

125

126

126.5

127

128

128.5

130

131

132

134

134.5

136

138

140

145

146

148

150

152

157

160

170

180

187.5

190

200

230

300

400
Drawing

Clear

Main Body Material
- Stainless Steel
- Steel
- Zinc Alloy
- Polyamide
- Nylon
- Aluminum
- Other
Clear

Main Body Surface Treatment
- N/A
- Baked Paint Finish
- Buffed Surface
- Chrome Plating
- Nickel Plating
- Electrostatic Paint
- Cationic paint / Electrodeposited Coating
- Electrolytic Polishing
- Powder Coating
- Black Oxide
- Other
- Electroless Nickel Plating
- Paint
Clear

Mounting Section Material
- Stainless Steel
- Steel
- Brass
- Zinc Alloy
- Polyamide
Clear

Mounting Section Surface Treatment
- N/A
- Electroless Nickel Plating
- Black Oxide
- Black Chromate
- Paint
- Trivalent Chromate
- Zinc Plating
- Hard Chrome Plating
Clear

Knob Material
- Phenol
- Steel
- Stainless Steel
- ABS Resin
Clear

Surface Treatment of knob
- N/A
- Chrome Plating
Clear

Adjustment screw for gap
- N/A
- Available
Images

Clear

Mounting Section Diameter d(mm) and/or Diameter
3

M3

4

M4

5

M5

6

M6

6.4(1/4inch)

7.9(5/16inch)

8

M8

9.5(3/8inch)

10

M10

12

M12

14

M14

16

M16

17

20

M20

22

24

M24

25

30

32

M36
Drawing

Clear

Mounting Section Length L(mm)
5

6

7

8

9

10

11

12

12.5

13

14

15

15.5

16

17

17.5

18

19

19.5

20

21

22

23

25

26

26.5

27

29

30

31

32

34

35

36

40

45

47

50

52

55

57

60

63

65

69

70

72

72.5

80

85

86

90

100

120

125

126

132

140

160

190

200

220
Drawing

Clear

Mounting Section Diameter C(mm)
M3

M4

5

M5

6

M6

8

M8

10

M10

12

M12

M14

16

M16
Clear

Mounting Section Thickness h(mm)
13

17
Clear

Narrow search by specifying Brand

- MISUMI (19)
- Cost Efficient Products ()
- NORELEM (264)
- KIPP (152)
- ESCO (116)
- GANTER (70)
- HALDER (47)
- KONISHI MFG (30)
- IMAO CORPORATION (25)
- NABEYA BI-TECH (21)
- ELESA (18)
- EUROFLEX (3)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

GANTER Clamping Levers

Filter by:

Stock

Narrow search by specifying spec./dim.

Application

Type Clamp

Type operation

Operation Direction

Shape

L-Shaped Clamp Lever Shape

Lever Shape with Knob

Mounting Section Type

Rotating Radius R(mm)

Main Body Material

Main Body Surface Treatment

Mounting Section Material

Mounting Section Surface Treatment

Knob Material

Surface Treatment of knob

Adjustment screw for gap

Mounting Section Diameter d(mm) and/or Diameter

Mounting Section Length L(mm)

Mounting Section Diameter C(mm)

Mounting Section Thickness h(mm)

Narrow search by specifying Brand

Narrow search by specifying CAD data type

Categories related to Clamping Levers

Betalningsmetod

Behovsstyrd tillverkning

Ändra vy

Certifikat

MISUMI världen över

Sociala medier

Juridiskt meddelande