GANTER Handles / Bow handles / Cup handles / Trough handles / Carrying handles（Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Cabinet "U" handles, Aluminium
GANTER
Cabinet "U" handles GN 426.1 are produced from profiled aluminium extrusions.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 24.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles, Hygienic Design
GANTER
GN 429 cabinet „U“ handles are intended for use in hygiene areas. The sealed mounting surfaces enable fastening without dead spaces. The high quality finish prevents adherence of dirt and facilitates cleaning.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
Starting from∗ ： 28.84 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Starting from∗ ： 5.02 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Flat cabinet "U" handles, Aluminium
GANTER
Cabinet handles GN 668 are produced from aluminium extrusions.
They can be mounted either from the back (type A) or by means of the handle base from the operator’s side (type B).
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.50 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Handle legs for tubular handles, Zinc die casting
GANTER
Handle legs GN 333.8 can be used for longer tubes or higher loads of tubular handles.
They can be used for tube Ø 28 of the tubular handles GN 333 and GN 333.2.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 17.58 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Handle legs for tubular handles, Zinc die casting
GANTER
Handle legs GN 333.9 can be used for longer tubes or higher loads of tubular handles.
They can be used for tube Ø 28 of the tubular handles GN 333.1 and GN 333.3.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 17.50 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Ledge handles, with lettering block
GANTER
Typical applications for ledge handles with lettering block GN 430.1 include swivel or sliding doors on protective doors and equipment. They are also suitable for use as drawer handles.
The screw channel for screw sizes M6 (extruded aluminium) allows an optional number of fixing screws in any position within the dimension l2.
Special lengths are easily realised because the ledge handle needs no further machining when mounted.
In the design with lettering block, the end cap when delivered is mounted on one side such that the paper / film strip supplied can be lettered and pushed into the groove provided.
Go to www.ganter-griff.de/service to open a ZIP-file with different documents (Word®, Open Office, PDF) which you can use to create lettering and labels.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 11.42 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Oval tubular handles Mounting from operator‘s side
GANTER
Oval tubular handles GN 334.1 are highly stable.
The handle tube can be mounted without any further machining, allowing special lengths to be realised easily.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 30.18 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Oval tubular handles, Aluminum / Plastic
GANTER
Characteristic for the design of the GN 366 oval handles: Tube and handle leg are made in the same elliptical profile.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 41.76 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Oval tubular handles, Aluminum / Zinc die casting
GANTER
Oval tubular handles GN 334 are attractive in design and highly stable.
The handle tube can be mounted without any further machining, allowing special lengths to be realised easily.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 32.10 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Arch handles
GANTER
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 65.90 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel-Cabinet "U" handles
GANTER
Stainless Steel-Cabinet "U" handles GN 426.5 can be mounted from the back (type A) as well as from the operator’s side (type B). In this case the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw.
Both mounting methods allow the mounting of a pair of handles in opposite position. This method could be used e.g. on doors (double handle). In general, a mounting stud with special length l2 might be required.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 47.32 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Finger handles
GANTER
Stainless Steel-Finger handles- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.96 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Folding handles
GANTER
Stainless Steel-Folding handles GN 425.2 are used in such applications where minimal protrusion is required.
In both positions the handle is retained by a spring loaded detent.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 46.66 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Stainless Steel-Folding handles
GANTER
Folding handles GN 425.5 are used in places where the handle must not protrude or protrude only a short distance.
The handle is locked in place in the resting position by means of a spring-loaded (cup springs) thrust bolt.
The static load capacity value given in the table is an approximate value which, if exceeded, may result in permanent deformation or fracture of the plastic attachment part. The folding handle GN 425.2 may be used as an alternative.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 28.98 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel-Tubular handles
GANTER
Type E of Stainless Steel-Tubular handles GN 666.5 is completely made of A2-Stainless Steel.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 67.96 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
System handles, Aluminium
GANTER
System handles GN 669 offer the the advantage of high stability due to the connection of tube / handle leg.
The screws of type B (mounting from operator´s side) are shrouded.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 30.14 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tubular arch handles, Tube Aluminum or Stainless Steel
GANTER
With their curved type, GN 666.4 tubular arch handles highlight modern machine design.
The production method used allows special solutions to be realised, e. g. with other radii of curvature or other leg heights.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 102.14 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Tubular handles with power switching function
GANTER
Tubular handles GN 331 with power switching function are suitable for unlocking safety tumblers in rotating, detachable or side-sliding safety devices which must be closed in order to safeguard the required operational safety.
By integrating functions such as emergency stop, start, release, reset and LED status display, this tubular handle allows the machine to be monitored and operated directly at the door or gate.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 432.34 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tubular handles, Tube Aluminium or Stainless Steel
GANTER
Owing to their large range of variants and their classic design, GN 666 .1 tubular handles are the perfect choice for many applications.
The mounting screws included allow the installation both from the operator side and the rear side. GN 666.1 and GN 666 tubular handles of identical length are also suitable for double mounting, e.g. for sliding doors.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 36.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Tubular handles, Tube Aluminium or Stainless Steel
GANTER
Owing to their large range of variants and their classic design, GN 666 tubular handles are the perfect choice for many applications.
With the modular structure, special lengths are avaiable even in comparatively small unit quanitites. Large handle can be supplied with additional centre struts.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 27.88 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tubular handles, with power switching function
GANTER
Tubular handles GN 332 with power switching function are suitable for unlocking safety tumblers in rotating, detachable or side-sliding safety devices which must be closed in order to safeguard the required operational safety.
By integrating functions such as emergency stop, start, release, reset and LED status display, this tubular handle allows the machine to be monitored and operated directly at the door or gate.
Tubular handles GN 332 save mounting and installation work, are attractively designed and optimise ergonomy: the switching and operating functions are located precisely where they are needed.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 434.78 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
M.1066 - Tubular handles -Technopolymer aluminium stainless steel
ELESA
Tubular handle with handle shanks in glass-fibre reinforced polyamide-based technopolymer, lateral closing caps in polyamide-based technopolymer and option for front or rear mounting.Aluminium tube with metallic graphite colour coating, or aluminium with metallic graphite colour epoxy resin coating, or natural anodized aluminium, or AISI 304 stainless steel, or aluminium with coating in white similar to RAL9002 for the CLEAN version.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 35.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cabinet "U" handles, Aluminum (GN 328)
GANTER
GN 328 cabinet “U” handles have excellent stability and ergonomic design.The finger recesses on the underside of the handle provide a specially comfortable grip.In particular in combination with the larger GN 428 cabinet “U” handle, they meet the requirements of modern industrial design.- Volume Discount
Starting from∗ ： 7.48 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Cabinet "U" handles, with power switching function, with cable (GN 422)
GANTER
GN 422 cabinet “U” handles come with one or two push buttons. Each button has a changeover switch and integrated LED ring lighting.When the button is pressed, an electrical control impulse to switch off a machine, for example, can be triggered based on the wiring of the contacts (NC or NO).Independent whether or not the button is actuated, the integrated LED ring lighting shines either red or green depending on the polarity of connections 1 and 2 of the LED.The cabinet "U" handle is functional and highly compact and can be used for any application due to its universal design.- Volume Discount
Starting from∗ ： 107.90 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Gripping trays, Zinc die casting, screw-in type (GN 7330)
GANTER
Gripping trays GN 7330 can be easily and quickly installed from the front using countersunk screws or from the back with grub screws.
Gripping trays with housing seal (no. 2) prevent the penetration of any dirt or liquids into the housing interior. Type A is supplied with four additional countersunk sealing screws, which feature a polyamide coating on the head to create a tight seal.- Volume Discount
Starting from∗ ： 11.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Oval tubular handles, with inclined profile, Aluminum / Zinc die casting (GN 335)
GANTER
GN 335 oval tubular handles have an inclined handle profile with a 45° angle. These handles are comfortable and ergonomic to grasp in a variety of applications such as sliding doors.For type B, socket button head screws, hexagon nuts and washers are included parts of the order.The tubular handle can be screwed onto the handle shanks without further modification. This allows even a small quantity of special lengths to be ordered.- Volume Discount
Starting from∗ ： 29.18 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 16.04 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 103.16 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 33.98 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Main Body Type |
| Surfaced Type Category |
| U-shaped Type |
| Pitch P(mm) |
| Main Body Material |
| Pitch P2 (Short Side) *If 4 Holes(mm) |
| Height H(mm) |
| Additional Function |
| Main Body, Surface Treatment |
| Mounting Method |
| Handle Thickness D(mm) |
| Handle Cross Sectional Shape |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | ELESA | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Product Series | M.1066 - Tubular handles -Technopolymer aluminium stainless steel | Cabinet "U" handles, with power switching function, with cable (GN 422) | Oval tubular handles, with inclined profile, Aluminum / Zinc die casting (GN 335) | |||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
| Starting from∗ | 24.06 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 28.84 € *Unit price with basic configuration Volume Discount | 5.02 € *Unit price with basic configuration Volume Discount | 5.50 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 17.58 € *Unit price with basic configuration Volume Discount | 17.50 € *Unit price with basic configuration Volume Discount | 11.42 € *Unit price with basic configuration Volume Discount | 30.18 € *Unit price with basic configuration Volume Discount | 41.76 € *Unit price with basic configuration Volume Discount | 32.10 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 65.90 € *Unit price with basic configuration Volume Discount | 47.32 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 6.96 € *Unit price with basic configuration Volume Discount | 46.66 € *Unit price with basic configuration Volume Discount | 28.98 € *Unit price with basic configuration Volume Discount | 67.96 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 30.14 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 102.14 € *Unit price with basic configuration Volume Discount | 432.34 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 36.00 € *Unit price with basic configuration Volume Discount | 27.88 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 434.78 € *Unit price with basic configuration Volume Discount | 35.38 € *Unit price with basic configuration Volume Discount | 7.48 € *Unit price with basic configuration Volume Discount | 107.90 € *Unit price with basic configuration Volume Discount | 11.00 € *Unit price with basic configuration Volume Discount | 29.18 € *Unit price with basic configuration Volume Discount | 16.04 € *Unit price with basic configuration Volume Discount | 103.16 € *Unit price with basic configuration Volume Discount | 33.98 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | 4 Days | 7 Days | Same day | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | Same day | 7 Days | Same day | Same day | 4 Days | 3 Days | Same day | Same day | 7 Days | Same day | 7 Days | Same day | 7 Days | 6 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days |
| Main Body Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surfaced Type Category | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| U-shaped Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch P(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 250 | - | - | - | - | - | - | - |
| Main Body Material | Aluminum | Stainless Steel | - | - | - | - | - | - | - | - | - | - | - | Stainless Steel | Stainless Steel | - | - | - | - | - | - | - | EN 1.4301 Equiv. | - | Zinc Die Cast | - | - | - | - | - |
| Pitch P2 (Short Side) *If 4 Holes(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height H(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 75 | - | - | - | - | - | - | - |
| Additional Function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body, Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Handle Thickness D(mm) | 20 ～ 28 | 12 ～ 16 | 8 ～ 10 | - | 28 | 28 | - | 36 | 36 | 36 | 20 | 20 ～ 28 | 8 ～ 10 | - | - | 30 | 28 | 30 | - | 30 | 30 | - | 18 | - | - | - | - | - | - | - |
| Handle Cross Sectional Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Main Body Type
-
Surfaced Type Category
-
U-shaped Type
-
Pitch P(mm)
- 5
- 10
- 15
- 17
- 18
- 20
- 22
- 23
- 25
- 30
- 32
- 37.5
- 39
- 40
- 42
- 44
- 45
- 48
- 48.5
- 50
- 53
- 55
- 56
- 58
- 60
- 62
- 64
- 65
- 66
- 68
- 70
- 72.5
- 74
- 75
- 75.5
- 76
- 78
- 80
- 82
- 84
- 85
- 86
- 86±0.5
- 87
- 88
- 88±0.5
- 90
- 90-95
- 93.5
- 93.5±0.5
- 93.5±0.6
- 94
- 94±0.5
- 95.5±0.5
- 96
- 98
- 99
- 100
- 102
- 104
- 105
- 105±0.5
- 106
- 107
- 108
- 109
- 110
- 112
- 112-117
- 114
- 115
- 116
- 117
- 117±0.5
- 117±1
- 118
- 118±0.2
- 119
- 120
- 120±0.5
- 120÷122±1
- 122
- 122±1
- 125
- 126
- 128
- 129
- 130
- 132
- 132±0.5
- 132±1
- 132±2
- 133
- 135
- 136
- 138
- 140
- 140±1
- 147.5
- 148
- 149÷152±1
- 150
- 150±0.5
- 150±1
- 152
- 158
- 160
- 160±1
- 161
- 164
- 165
- 166
- 170
- 177-182
- 179
- 179±1
- 180
- 180±0.5
- 184
- 187
- 188
- 190
- 192
- 196
- 198
- 200
- 210
- 215
- 218
- 220
- 228
- 235
- 235±1
- 238
- 239
- 240
- 250
- 253
- 253.5
- 260
- 269
- 270
- 288
- 300
- 300±1
- 302
- 310
- 340
- 350
- 360
- 370
- 375
- 380
- 400
- 425
- 440
- 450
- 460
- 470
- 480
- 500
- 540
- 560
- 570
- 600
- 640
- 700
- 740
- 800
- 840
- 940
- 1000
-
Main Body Material
- EN 1.4301 Equiv.
- Steel
- Aluminum
- Zinc Die Cast
- Brass
- Phenol
- ABS
- Nylon
- Polypropylene
- PVC
- Polycarbonate
- Elastomer
- Polyamide
- EPDM
- Aluminum + Resin
- Polyurethane
- Zinc Alloy
- Polystyrene
- Others
- Plastic
- Stainless Steel
-
Pitch P2 (Short Side) *If 4 Holes(mm)
-
Height H(mm)
- 0.7
- 0.8
- 2
- 2.5
- 3.5
- 4.5
- 8
- 8.5
- 9
- 10
- 15
- 15.5
- 16
- 17
- 18
- 19
- 20
- 21
- 21.5
- 22
- 23
- 23.5
- 25
- 26
- 27
- 27.5
- 28
- 29
- 30
- 31
- 31.5
- 32
- 33
- 33.5
- 34
- 35
- 36
- 36.5
- 37
- 37.75
- 38
- 38.5
- 39
- 39.25
- 40
- 41
- 41.4
- 42
- 43
- 43.3
- 43.5
- 44
- 44.5
- 45
- 45.5
- 46
- 46.5
- 47
- 48
- 48.5
- 49
- 50
- 50.2
- 50.5
- 51
- 52
- 52.5
- 52.75
- 53
- 53.5
- 54
- 55
- 55.5
- 56
- 57
- 57.5
- 58
- 58.5
- 59
- 60
- 60.75
- 61
- 61.5
- 62
- 62.25
- 63
- 64
- 64.5
- 65
- 66
- 66.5
- 67
- 68
- 68.5
- 69
- 70
- 71
- 75
- 76
- 77
- 78
- 80
- 85
- 85.5
- 86
- 87
- 87.75
- 90
- 98
- 100
-
Additional Function
-
Main Body, Surface Treatment
-
Mounting Method
- Threads
- Tapped
- Round Hole
- Weld-On
- One-Touch
- Others
-
Handle Thickness D(mm)
-
Handle Cross Sectional Shape
Narrow search by specifying Brand
-
- MISUMI (60)
- TAKIGEN (141)
- KIPP (138)
- ROHDE (127)
- NORELEM (109)
- ESCO (100)
- GANTER (74)
- ELESA (43)
- NABEYA BI-TECH (32)
- KONISHI MFG (12)
- HALDER (9)
- TRUSCO NAKAYAMA (7)
- MAEDLER (2)
- FLAIR (2)
- HILOGIK (2)
- MARUKI HARDWARE (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Handles / Bow handles / Cup handles / Trough handles / Carrying handles
-
- Telescopic Slide Rails
- Fasteners, Draw Latches
- Latch Handles, Locks, Keys
- Wires, Chains, Metal Fittings, Small Work Pieces
- Parts, Small Work Pieces
- Hooks and Shackels
- Handles
- Clamping Knobs
- Clamping Levers
- Rotation Handles, Crank Handles
- Handles / Bow handles / Cup handles / Trough handles / Carrying handles
- Hinges
- Building Hardware / Interiors / Exteriors
-
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.