MITUTOYO Micrometers（Page 3）

?* Information on days to ship and prices

• 

  Digital Tube Micrometer Sph. Anvil/Spindle

  MITUTOYO

  This Digimatic Tube Micrometer allows you to measure curved surfaces such as the wall thickness of tubes, bearings and rings. Spherical and cylindrical anvil type.

  Starting from∗ ：	610.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Tube Micrometer, IP65

  MITUTOYO

  This Digimatic Tube Micrometer allows you to measure curved surfaces such as the wall thickness of tubes, bearings and rings.

  Starting from∗ ：	666.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Tube Micrometer, Spherical Anvil

  MITUTOYO

  This Digimatic Tube Micrometer allows you to measure curved surfaces such as the wall thickness of tubes, bearings and rings.

  Starting from∗ ：	648.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Tubular Inside Micrometer (Pipe)

  MITUTOYO

  This is an extension pipe type inside micrometer that offers you the following benefits:
  - Interchangeable extensions in a hollow pipe design.
  - Carbide measuring faces
  - Digimatic type with data output
  - It has excellent resistance against water and dust (IP65 protection level) enabling you to use it in machining situations that include splashing coolant fluid.

  Starting from∗ ：	1,310.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Tubular Inside Micrometer (Rod)

  MITUTOYO

  This is an extension rod type inside micrometer that offers you the following benefits:
  - Interchangeable extensions with cylindrical gage rods are spring-mounted in protective sleeves so you can extend the measuring range.
  - Carbide measuring faces
  - Digimatic type, with data output
  - It has excellent resistance against water and dust (IP65 protection level) enabling you to use it in machining situations that include splashing coolant fluid.

  Starting from∗ ：	1,310.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer

  MITUTOYO

  This Disc Micrometer enables you to measure hard-to-reach features, offering you the following benefits:
  - Measuring the root tangent length of spur and helical gears.
  - You can measure recessed features that are difficult to reach with a standard micrometer.

  Starting from∗ ：	269.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer Non-Rotating Spindle Type

  MITUTOYO

  This Disc Micrometer has a non-rotating spindle and allows you measure a range of different materials.
  It offers you the following benefits:
  - It features a non-rotating spindle and disc-shaped measuring surfaces.
  - Measuring the root tangent length of spur and helical gears
  - Measurable range of gear pitch: 0.5-6 module
  - It's suitable for measuring materials such as felt, rubber, cardboard and fabric.

  Starting from∗ ：	325.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Inside Micrometer Checker

  MITUTOYO

  This Inside Micro Checker offers you the following benefits:
  - Applicable for Series 133, 139 and 145 (over 50 mm)
  - Not applicable for Series 137, 141, 337 and 339
  - It designed to act as a setting standard for inside micrometers.
  - It comes with ceramic gauge blocks.

  Starting from∗ ：	2,314.47 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer Non-Rotating Spindle Type, Inch

  MITUTOYO

  This Disc Micrometer has a non-rotating spindle and allows you measure a range of different materials.
  It offers you the following benefits:
  - It features a non-rotating spindle and disc-shaped measuring surfaces.
  - Measuring the root tangent length of spur and helical gears
  - Measurable range of gear pitch: 0.5-6 module
  - It's suitable for measuring materials such as felt, rubber, cardboard and fabric.

  Starting from∗ ：	325.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer, Inch

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with disc-ended spindle and anvil to enable measurement of shrouded features, such as gear teeth. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	269.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Display Unit Borematic Series 568, Metric

  MITUTOYO

  Starting from∗ ：	1,234.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Display Unit EC-Counter

  MITUTOYO

  This Digimatic display can be connected to any device with Digimatic output, including micrometers, indicators, calipers and LGS/LGD Linear Gauge.
  It offers you the following benefits:
  - It has a data output and tolerance evaluation function.

  Starting from∗ ：	517.11 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  External Digital Caliper Gauge

  MITUTOYO

  A Mitutoyo external dial caliper gauge. The caliper is spring loaded and makes point contact at constant measuring force.

  Starting from∗ ：	723.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Groove Micrometer, Rotating Spindle

  MITUTOYO

  A Mitutoyo non-digital tubular micrometer equipped with concentric, disc-shaped anvils for making measurements inside holes, such as width, depth and location of grooves and projections. Separate graduations for inside and outside measurements avoid need for corrections for anvil thickness. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	447.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High Accuracy Digital Micrometer

  MITUTOYO

  This Micrometer enables 0.1 μm resolution measurements and is ideal for customers who need to make highly accurate measurements with a hand-held tool (such as Gauge R & R analysis).
  The Absolute High-Accuracy Micrometer offers the following benefits:
  - It delivers higher accuracy without sacrificing operability, by using Mitutoyo‘s innovative 0.1 μm resolution ABS (absolute) rotary sensor and high accuracy screw machining technology which reduces instrumental error to just 0.5 μm.
  - Its highly rigid frame and high-performance constant-force mechanism (7-9 N) enable more stable measurement.

  Starting from∗ ：	2,006.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High Accuracy Digital Micrometer, Inch

  MITUTOYO

  This Micrometer enables 0.1 μm resolution measurements and is ideal for customers who need to make highly accurate measurements with a hand-held tool (such as Gauge R & R analysis).
  The Absolute High-Accuracy Micrometer offers the following benefits:
  - It delivers higher accuracy without sacrificing operability, by using Mitutoyo‘s innovative 0.1 μm resolution ABS (absolute) rotary sensor and high accuracy screw machining technology which reduces instrumental error to just 0.5 μm.
  - Its highly rigid frame and high-performance constant-force mechanism (7-9 N) enable more stable measurement.

  Starting from∗ ：	1,457.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Holtest Internal Micrometer, Series 368

  MITUTOYO

  This is a set of three-point and two-point internal micrometers that offers you the following benefits:
  - Complete unit set
  - Carbide measuring surface
  - Titanium-coated measuring pins give you excellent durability and impact resistance.
  - Delivered with setting rings and extension rod.

  Starting from∗ ：	384.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hub Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer for measuring hub thickness and shoulder width inside a hole. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	315.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Indicating Micrometer with Button Left

  MITUTOYO

  A Mitutoyo non-digital, rapid-retraction-anvil indicating micrometer equipped with a high resolution dial indicator.

  Starting from∗ ：	843.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Indicating Micrometer with Button Right

  MITUTOYO

  A Mitutoyo non-digital, rapid-retraction-anvil indicating micrometer equipped with a high resolution dial indicator.

  Starting from∗ ：	859.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Inside Micrometer

  MITUTOYO

  This is an extension rod type inside micrometer that offers you the following benefits:
  - Interchangeable extensions with cylindrical gage rods are spring-mounted in protective sleeves so you can extend the measuring range.
  - Carbide measuring faces are available.

  Starting from∗ ：	177.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Interchangeable Anvil Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer that accepts easily interchangeable anvils to enable a wide variety of measurement, such as tubing thickness, shoulder-edge distance and rivet height. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	333.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Interchangeable Ball Anvil/Spindle Tip

  MITUTOYO

  These optional interchangeable anvils allow you to measure the over-pin diameter of gears.

  Starting from∗ ：	152.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Interchangeable Tip Set (Metric/UNF)

  MITUTOYO

  A set of matching Mitutoyo anvil and spindle tips to fit Series 126/326 Screw Thread Micrometers to cover the ranges 0.4-7 mm pitch Metric and 64-3.5 TPI Unified.

  Starting from∗ ：	414.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Interchangeable Tip Set (Whitworth)

  MITUTOYO

  A set of matching Mitutoyo anvil and spindle tips to fit Series 126/326 Screw Thread Micrometers to cover the range 60-3.5 TPI Whitworth.

  Starting from∗ ：	886.84 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Interchangeable Tips

  MITUTOYO

  A pair of matching Mitutoyo anvil and spindle tips to fit Series 126/326 Screw Thread Micrometers.

  Starting from∗ ：	77.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Internal Groove Micrometer

  MITUTOYO

  A non-digital tubular Mitutoyo micrometer equipped with concentric, disc-shaped anvils for making measurements inside holes, such as width, depth and location of grooves and projections. Separate graduations for inside and outside measurements avoid need for corrections for anvil thickness. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	543.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Limit Micrometer

  MITUTOYO

  A dual, non-digital Mitutoyo micrometer arranged as a GO/NG adjustable snap gauge, able to test component size against upper and lower tolerance limits simultaneously.

  Starting from∗ ：	476.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head

  MITUTOYO

  These micrometer heads have a very fine spindle.
  They offer the following benefits:
  - Small size micrometer heads with extremely fine pitch of 0.1 mm
  - Ideal for fine adjustment applications in scientific apparatus

  Starting from∗ ：	95.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Locking Screw Type, Spherical Spindle

  MITUTOYO

  These micrometer heads feature a knurled locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	97.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head XY-Stage

  MITUTOYO

  A Y-axis style bidirectionally graduated large-thimble, non-digital Mitutoyo micrometer head with plain Ø 18 mm stem and heavy-duty Ø 8 mm spindle fitted with flat non-rotating tip.

  Starting from∗ ：	289.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Zero Adjustable

  MITUTOYO

  These are a standard type of small size micrometer heads with a zero-adjustable thimble.
  They offer the following benefits:
  - You can make a zero-setting at any position by loosening the setscrew in the thimble.

  Starting from∗ ：	89.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Zero Adjustable, with Clamp Nut

  MITUTOYO

  These are a standard type of small size micrometer heads with a zero-adjustable thimble.
  They offer the following benefits:
  - You can make a zero-setting at any position by loosening the setscrew in the thimble.

  Starting from∗ ：	95.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Carbide Tipped Spindle

  MITUTOYO

  This small micrometer head with tungsten carbide measuring surface offers you the following benefits:
  - Stem with clamp nut and a flat or spherical spindle end
  - Stem with carbide-tipped spindle

  Starting from∗ ：	72.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Carbide Tipped Spindle, with Clamp Nut

  MITUTOYO

  This small micrometer head with tungsten carbide measuring surface offers you the following benefits:
  - Stem with clamp nut and a flat or spherical spindle end
  - Stem with carbide-tipped spindle

  Starting from∗ ：	75.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Heavy Duty

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefits:
  - 8 mm diameter spindle
  - Extremely sturdy micrometer head with or without a ratchet.

  Starting from∗ ：	119.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Heavy Duty, with Clamp Nut

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefits:
  - 8 mm diameter spindle
  - Extremely sturdy micrometer head with or without a ratchet.

  Starting from∗ ：	125.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Large Thimble Type

  MITUTOYO

  These micrometer heads come with a large thimble, allowing you to make fine adjustments.
  They offer the following benefits:
  - The large scale drum allows fine graduation and very easy rotation.

  Starting from∗ ：	293.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Large Thimble Type, with Clamp Nut

  MITUTOYO

  These micrometer heads come with a large thimble, allowing you to make fine adjustments.
  They offer the following benefits:
  - The large scale drum allows fine graduation and very easy rotation.

  Starting from∗ ：	82.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Locking Screw Type, Flat

  MITUTOYO

  These micrometer heads feature a knurled locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	72.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Locking Screw Type, Spherical

  MITUTOYO

  These micrometer heads feature a knurled locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	74.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Medium-sized Standard

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefits:
  - 8 mm diameter spindle
  - Extremely sturdy micrometer head with or without a ratchet.

  Starting from∗ ：	63.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Short Thimble Type

  MITUTOYO

  Short thimble type with thimble diameter options.

  Starting from∗ ：	70.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Short Thimble Type, with Clamp Nut

  MITUTOYO

  Short thimble type with thimble diameter options.

  Starting from∗ ：	70.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Small Standard Type, with Clamp Nut

  MITUTOYO

  This is a standard, small-sized micrometer head which offers you the following benefits:
  - Plain stem and a flat or spherical spindle end
  - Hardened steel measuring surface

  Starting from∗ ：	68.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...