WIHA Torque Screwdrivers
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Torque Adapter easyTorque Electric, for slimBits and slimVario® Holder in Blister
WIHA
Increases your efficiency: Fully compatible with the Wiha slimBit system.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Lowers your costs: The correct torque protects you from warranty claims.
Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Starting from∗ ： 32.67 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Torque Screwdriver Set TorqueVario®-S Electric, 0.8-5.0 Nm, PlusMinus/Pozidriv, Variably Adjustable Torque Limit, 5 Pieces
WIHA
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Lowers your costs: The correct torque protects you from warranty claims.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Application: For controlled fastening on live parts up to 1 000 V AC.
Standards: Manufactured acc. to IEC 60900.
The fully certified TorqueVario®-S VDE torque system provides controlled screw tightening combined with safe use for electric installations. The tool set contains an ergonomically shaped torque screwdriver with an integrated numeric scale, 2 slimBits, a bit holder and an adjusting tool. All components are arranged practically in a high-grade, hard-wearing box, where they are easy to identify. The VDE torque screwdriver covers a wide variety of applications with a torque range between 0.8 and 5.0 Nm. A clearly audible, physically perceptible signal emitted when the torque is produced guarantees process safe torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. The insulated ClicFix bit holder guarantees a secure hold for 75 mm long slimBits thanks to mechanical blade locking. Both the torque screwdriver and the slimBits undergo an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
For applications in electrics
DIN EN ISO 6789.
Content:
- 1x Torque screwdriver TorqueVario®-S electric variably adjustable torque limit 0.8 - 5 (26626)
- 1x Setting tool for torque screwdriver with long handle 90 mm (26864)
- 1x Adapter TorqueVario-S electric for slimBits 6.0 mm (35870)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
Starting from∗ ： 147.69 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Torque Screwdriver Set TorqueVario®-S Electric, 0.8-5.0 Nm, Mixed, Variably Adjustable Torque Limit, 14 Pieces in Folding Bag
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Simplifies your work: All tools securely arranged in a robust, orderly bag.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Lowers your costs: The correct torque protects you from warranty claims.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Application: For controlled fastening on live parts up to 1 000 V AC.
Standards: Manufactured acc. to IEC 60900.
The fully certified TorqueVario®-S VDE torque system provides controlled screw tightening combined with safe use for electric installations. The tool set contains an ergonomically shaped torque screwdriver with a built-in numeric scale, 9 slimBits, a bit holder, an adjusting tool and a screwdriver with SoftFinish® electric slimVario bit holder for slimBits. All components are arranged practically in a high-grade, hard-wearing box, where they are easy to identify. The VDE torque screwdriver covers a wide variety of applications with a torque range between 0.8 and 5.0 Nm. A clearly audible, physically perceptible signal emitted when the torque is produced guarantees process safe torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. The insulated ClicFix bit holder guarantees a secure hold for 75 mm long slimBits thanks to mechanical blade locking. Both the torque screwdriver and the slimBits undergo an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
For applications in electrics
DIN EN ISO 6789.
Content:
- 1x Torque screwdriver TorqueVario®-S electric variably adjustable torque limit 0.8 - 5 (26626)
- 1x Setting tool for torque screwdriver with long handle 90 mm (26864)
- 1x Screwdriver with bit holder SoftFinish® electric slimVario for slimBits 6.0 mm (34577)
- 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
- 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit Pozidriv PZ1 x 75 mm (34585)
- 1x slimBit electric bit Pozidriv PZ2 x 75 mm (34586)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
- 1x Folding bag
Starting from∗ ： 180.81 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver iTorque® with Digital Scale
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Lowers your costs: The correct torque protects you from warranty claims.
Increases your productivity: Utmost process safety thanks to integrated ClickControl counting function and calibration alarm.
Application: For controlled fastening with the pre-set torque.
Bit holder: Torque bit universal holder exchange blade for accommodating C 6.3 and E 6.3 (1/4") bits (included in delivery).
Extra: Large digital display for simple stepless setting of torque value.
Extra: Units can be simply switched - Nm ↔in.lbs / cNm ↔in.oz.
Extra: Click Control - integrated counter records all applications. Calibration alert following 5,000 applications (normative reference value/resettable)
Accuracy: ±6%, traceable to national standards.
Handle: Torque can be conveniently set directly via push button integrated in handle.
Handle: Ergonomic plastic/metal compound handle of quality, robust materials.
Handle: Handle sizes proportioned to optimise torque setting.
Handle: Distinctly audible and perceptible click signal when set toque is reached.
Handle: Compatible with all blades of the 2859.
When changing indexable cutter inserts, controlled fastening with a specific torque is essential to ensure they are not damaged. Intelligent, innovative and individual, the iTorque® torque screwdriver delivers the remedy. The required Nm value can be easily set within the continuously adjustable range on the cap at the end of the iTorque®'s handle. What's more, users can also change the torque unit from Nm to lbs. The large digital display with numeric readings allows users to read the set Nm value quickly and easily. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. An integrated counter documents the number of activations, which is particularly important for monitoring testing equipment. The alarm function reminds users when calibration is due – the calibration cycle is set at 5,000 tasks ex works, but can be adjusted as required. The ergonomically shaped handle grip with soft zones provides optimum torque screwdriver handling. The set includes a bit universal holder for holding 1/4" bits. The iTorque® is also compatible with 4 mm Wiha Torque interchangeable blades (series 2859).
DIN EN ISO 6789.
Starting from∗ ： 198.11 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver easyTorque, Permanently Pre-Set Torque Limit
WIHA
Lowers your costs: The correct torque protects you from warranty claims.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade.
Accuracy: ±10%
Handle: Multi-component handle optimally designed for the hand enables optimal power transmission.
Handle: Audible and perceptible click when the pre-set torque has been attained.
Handle: Mechanism insensitive to industrial lubricants.
Handle: Compatible with all blades of the 2859.
Are you looking for controlled screw tightening without damage to materials and follow-up work? No problem with the easyTorque torque screwdriver, which ensures process safety in its application. Thanks to a click signal when reaching the set torque value, the work piece remains undamaged and protects you from warranty claims. The multi-component handle, which is ergonomically designed for the hand, enables optimum power transmission while protecting your health. In addition, the torque screwdriver is also compatible with all blades from the 2859 series. With its mechanics that are not affected by industrial lubricants, the torque screwdriver is your perfect companion for comfortable work. Designed based on the standard EN ISO 6789, the torque tool offers a release accuracy of +/- 10%.
Bit holders or blades are not included in delivery.
Based on DIN EN ISO 6789.
Starting from∗ ： 35.52 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Blade, Hexagon, for Torque Screwdriver with Key Handle
WIHA
Application: For controlled fastening with the pre-set torque.
Extra: Very slim blade diameter for hard-to-reach screws.
Starting from∗ ： 4.40 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Blade, TORX®, for Torque Screwdriver with T-Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Application: For controlled fastening with the pre-set torque.
Starting from∗ ： 7.04 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Torque Screwdriver TorqueFix®, Permanently Pre-Set Torque Limit
WIHA
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Lowers your costs: The correct torque protects you from warranty claims.
Increases your process reliability: Pre-set torque for repetitive work processes.
Application: For controlled fastening of circular plug connectors with hexagonal head according to specified torque.
Starting from∗ ： 80.99 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver Set TorqueVario®-S Electric, 0.8-5.0 Nm, Mixed, Variably Adjustable Torque Limit, 19 Pieces in Folding Bag
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Simplifies your work: All tools securely arranged in a robust, orderly bag.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Lowers your costs: The correct torque protects you from warranty claims.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Application: For controlled fastening on live parts up to 1 000 V AC.
Standards: Manufactured acc. to IEC 60900.
The fully certified TorqueVario®-S VDE torque system provides controlled screw tightening combined with safe use for electric installations. The tool set contains an ergonomically shaped torque screwdriver with an integrated numeric scale, 15 slimBits, a bit holder and an adjusting tool. All components are arranged practically in a high-grade, hard-wearing box, where they are easy to identify. The VDE torque screwdriver covers a wide variety of applications with a torque range between 0.8 and 5.0 Nm. A clearly audible, physically perceptible signal emitted when the torque is produced guarantees process safe torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. The insulated ClicFix bit holder guarantees a secure hold for 75 mm long slimBits thanks to mechanical blade locking. Both the torque screwdriver and the slimBits undergo an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
For applications in electrics
DIN EN ISO 6789.
Content:
- 1x Torque screwdriver TorqueVario®-S electric variably adjustable torque limit 0.8 - 5 (26626)
- 1x Setting tool for torque screwdriver with long handle 90 mm (26864)
- 1x Adapter TorqueVario-S electric for slimBits 6.0 mm (35870)
- 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
- 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Slotted 6.5 mm x 75 mm (34582)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit Pozidriv PZ1 x 75 mm (34585)
- 1x slimBit electric bit Pozidriv PZ2 x 75 mm (34586)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
- 1x slimBit electric bit TORX® T9 x 75 mm (41160)
- 1x slimBit electric bit TORX® T10 x 75 mm (35507)
- 1x slimBit electric bit TORX® T15 x 75 mm (35508)
- 1x slimBit electric bit TORX® T20 x 75 mm (35509)
- 1x slimBit electric bit TORX® T25 x 75 mm (36071)
- 1x Folding bag
Starting from∗ ： 212.36 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Set easyTorque Adapter Electric, 0.8 Nm with slimVario® Holder and SL/PZ slimBits, 4 Pieces
WIHA
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Lowers your costs: The correct torque protects you from warranty claims.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. With a release accuracy of +/- 10%, the torque tool complies with EN ISO 6789 requirements. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Content:
- 1x Screwdriver with bit holder SoftFinish® slimVario® electric
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
- 1x Torque adapter easyTorque electric for slimBits and slimVario® holder in blister 0.8 Nm (41341)
Starting from∗ ： 59.41 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
TorqueVario®-S Electric Nut Driver Insert 1/4" Set, Mixed, 11 Pieces, Including Adapters and Folding Bag
WIHA
Simplifies your work: All tools securely arranged in a robust, orderly bag.
Increases your flexibility: Nut driver inserts can be used with speedE®, slimVario® and TorqueVario®-S tools thanks to the enclosed adapters.
Protects your material: Fully insulated nut driver reduces the risk of short circuits.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Many different screw profiles are required for work at different locations, such as electrical enclosures and electric installations. The 10-pcs. set covers the most common screw connections with its selection of nut driver inserts and is thus flexible in its use. When combined with speedE®, slimVario® and TorqueVario® tools, the nut driver inserts can be used to tighten and loosen hex screws. Safely stored away and tidily arranged in a robust folding bag, these electrician tools are perfect for portable use. The bag also offers ample space for other slimVario® and TorqueVario®-S products. The fully insulated tools prevent potential short circuits caused by unintentional contact, even in confined working environments. Each tool in the set has undergone an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Content:
- 1x slimVario® electric adapter for 1/4" nut driver (43139)
- 1x Adapter TorqueVario-S electric for 1/4" nut driver (43128)
- 1x Insulated nut driver insert 1/4" hexagon head 5.0 mm (43089)
- 1x Insulated nut driver insert 1/4" hexagon head 5.5 mm (43090)
- 1x Insulated nut driver insert 1/4" hexagon head 6.0 mm (43091)
- 1x Insulated nut driver insert 1/4" hexagon head 7.0 mm (43092)
- 1x Insulated nut driver insert 1/4" hexagon head 8.0 mm (43093)
- 1x Insulated nut driver insert 1/4" hexagon head 10.0 mm (43095)
- 1x Insulated nut driver insert 1/4" hexagon head 11.0 mm (43096)
- 1x Insulated nut driver insert 1/4" hexagon head 13.0 mm (43098)
- 1x Folding bag
Starting from∗ ： 160.43 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Torque Set easyTorque Adapter Electric, for slimBits and slimVario® Holder, 5 Pieces
WIHA
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Increases your efficiency: Fully compatible with the Wiha slimBit system.
Lowers your costs: The correct torque protects you from warranty claims.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.
Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Content:
- 1x Torque adapter easyTorque electric for slimBits and slimVario® holder in blister 0.8 Nm (41341)
- 1x Torque adapter easyTorque electric for slimBits and slimVario® holder in blister 2.0 Nm (41342)
- 1x Torque adapter easyTorque electric for slimBits and slimVario® holder in blister 2.5 Nm (41343)
- 1x Torque adapter easyTorque electric for slimBits and slimVario® holder in blister 2.8 Nm (41344)
- 1x Torque adapter easyTorque electric for slimBits and slimVario® holder in blister 4.0 Nm (41345)
Starting from∗ ： 137.12 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Interchangeable Blade, TORX PLUS® MagicSpring®, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Increases your efficiency: Wiha MagicSpring® holding feature holds all Torx® screws in place without a magnet.
Application: For controlled fastening with the pre-set torque.
Extra: Very slim blade diameter for hard-to-reach screws.
Starting from∗ ： 3.80 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Set easyTorque Adapter Electric, 2.8 Nm with slimVario® Holder and SL/PZ slimBits, 4 Pieces
WIHA
Lowers your costs: The correct torque protects you from warranty claims.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Content:
- 1x Torque adapter easyTorque electric for slimBits and slimVario® holder in blister 2.8 Nm (41344)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
- 1x Screwdriver with bit holder set SoftFinish® slimVario® electric 4-pcs. with slimBits (43449)
Starting from∗ ： 60.83 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Torque Set easyTorque Adapter Electric, 2.0 Nm with slimVario® Holder and SL/PZ slimBits, 4 Pieces
WIHA
Lowers your costs: The correct torque protects you from warranty claims.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Content:
- 1x Torque adapter easyTorque electric for slimBits and slimVario® holder in blister 2.0 Nm (41342)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
- 1x Screwdriver with bit holder set SoftFinish® slimVario® electric 4-pcs. with slimBits (43449)
Starting from∗ ： 60.83 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Torque Screwdriver with T-Handle TorqueVario®-S T, 5-14 Nm, Variably Adjustable Torque Limit
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Makes handling easier: Effortless and comfortable transmission of high torques thanks to T-handle with ComfortGrip.
Lowers your costs: The correct torque protects you from warranty claims.
Application: For controlled fastening with the pre-set torque. Ideal for applying high torques.
Extra: Supply in robust box including works inspection protocol.
Accuracy: ±6%, traceable to national standards.
Handle: Soft-grip T-handle for extreme comfort and optimal torque transmission.
Handle: Window scale displays torque value numerically.
Handle: Torque infinitely adjustable with Torque-Setter setting tool (also supplied).
Great force is required to fasten screws at a specific torque value over 5 Nm with a normal torque screwdriver. Using a torque screwdriver with the TorqueVario®-S Tplus T-handle makes things much easier. Thanks to its integrated numeric scale and the supplied adjusting tool, variable torque settings can be made, thus covering a wide application field. *A clearly audible and tactile signal is emitted when triggering the set torque value, guaranteeing process-safe work, protecting material and eliminating follow-up work. The integrated friction clutch prevents the user from exceeding the required torque value. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. The comfortable T-handle with soft zones ensures optimum torque transmission. In addition to the torque T-handle, the set also includes 1/4" and 3/8" internal square adapter blades, a bit holder and six single bits. The TorqueVario®-S Tplus is also compatible with Wiha interchangeable blades for torque screwdrivers with a T-handle (series 2899). All tools in the set are safely stored neatly away in a robust, clearly organised box.
For applications in mechanics
DIN EN ISO 6789.
Starting from∗ ： 181.20 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver with T-Handle TorqueVario®-S T Electric, 5-14 Nm, Variably Adjustable Torque Limit
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Makes handling easier: Effortless and comfortable transmission of high torques thanks to T-handle with ComfortGrip.
Lowers your costs: The correct torque protects you from warranty claims.
Offers you full protection: Torque blades tested at 10,000 V AC and approved for 1,000 V AC.
Application: Suitable for controlled fastening of predefined torques for tasks such as industrial assembly work.
Standards: Manufactured acc. to IEC 60900.
Fastening screws at a specific torque value over 5 Nm with a normal torque screwdriver is a practically impossible task. The fully adjustable torque screwdriver with T-handle comes to the rescue. With a setting range between 5-14 Nm, it unites forces with the insulated torque blades for T-handle to cover a large application field. To set a torque value, the side lid is opened using a one-cent coin. Utilising the adjusting tool provided, the desired torque value can be set and read quickly and easily on the numerical Nm display. A clearly audible and tactile signal is emitted when triggering the set torque value, guaranteeing process-safe work, protecting material and eliminating follow-up work. The integrated friction clutch prevents the user from exceeding the required torque value. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. As a VDE- and IEC-certified product, the torque screwdriver with T-handle is approved for use on live parts up to 1,000 V AC and offers electricians full protection during their daily work.
For applications in electrics
Only for use with insulated Wiha torque blades for T-handles in series 28379 from 2018 onwards.
Manufactured acc. to IEC 60900.
DIN EN ISO 6789.Starting from∗ ： 184.69 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver with T-Handle TorqueFix® T, Permanently Pre-Set Torque Limit
WIHA
Application: For applications where recommended torque settings are important. Use in combination with an interchangeable 6 mm blade for Wiha T-handle torque tools.
Extra: Delivered in practical plastic box, incl. factory calibration certificate.
For applications in mechanics
DIN EN ISO 6789.
Starting from∗ ： 160.11 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Blade, Slotted, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Application: For controlled fastening with the pre-set torque.
Blade tip DIN ISO 2380-1.
Starting from∗ ： 4.83 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Torque Screwdriver with T-Handle Set TorqueVario®-S T, 5–14 Nm, Mixed, 12 Pieces, Variably Adjustable Torque Limit in Box
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Simplifies your work: All tools securely arranged in a robust, orderly bag.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Makes handling easier: Effortless and comfortable transmission of high torques thanks to T-handle with ComfortGrip.
Lowers your costs: The correct torque protects you from warranty claims.
Application: For controlled fastening with the pre-set torque. Ideal for applying high torques.
Extra: Supply in robust box including works inspection protocol.
Accuracy: ±6%, traceable to national standards.
Handle: Soft-grip T-handle for extreme comfort and optimal torque transmission.
Handle: Window scale displays torque value numerically.
Handle: Torque infinitely adjustable with Torque-Setter setting tool (also supplied).
Great force is required to fasten screws at a specific torque value over 5 Nm with a normal torque screwdriver. Using a torque screwdriver with the TorqueVario®-S Tplus T-handle makes things much easier. Thanks to its integrated numeric scale and the supplied adjusting tool, variable torque settings can be made, thus covering a wide application field. *A clearly audible and tactile signal is emitted when triggering the set torque value, guaranteeing process-safe work, protecting material and eliminating follow-up work. The integrated friction clutch prevents the user from exceeding the required torque value. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. The comfortable T-handle with soft zones ensures optimum torque transmission. In addition to the torque T-handle, the set also includes 1/4" and 3/8" internal square adapter blades, a bit holder and six single bits. The TorqueVario®-S Tplus is also compatible with Wiha interchangeable blades for torque screwdrivers with a T-handle (series 2899). All tools in the set are safely stored neatly away in a robust, clearly organised box.
For applications in mechanics
DIN EN ISO 6789.
Content:
- 1x Torque screwdriver with T-handle TorqueVario®-S T 5-14 Nm variably adjustable torque limit 5 - 14 (29233)
- 1x Setting tool for torque screwdriver with T-handle 90 mm (28691)
- 1x Adapter blade for torque screwdriver with T-handle 1/4" (28756)
- 1x Adapter blade for torque screwdriver with T-handle 3/8" (28757)
- 1x Bit holder for torque screwdriver with T-handle 125 mm (28758)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T40 (01722)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 4.0 mm (01706)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 5.0 mm (01707)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 6.0 mm (01708)
- 1x Box
Starting from∗ ： 219.51 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver with Key Handle TorqueFix® Key, Permanently Pre-Set Torque Limit
WIHA
Application: For controlled fastening with the pre-set torque.
Application: Loosening torque approx. +30% over torque.
Extra: Delivered in practical plastic box.
Extra: Incl. works inspection protocol.
DIN EN ISO 6789.
Starting from∗ ： 51.49 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver TorqueVario®-S, Variably Adjustable Torque Limit
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Lowers your costs: The correct torque protects you from warranty claims.
Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade.
Extra: Incl. works inspection protocol.
Extra: Delivered in practical plastic box.
Accuracy: ±6%, tracing to national standards (see table for other tolerances).
Handle: Torque infinitely adjustable with Torque-Setter setting tool (also supplied).
Handle: Ergonomic multi-component handle, particulary light and compact.
Handle: Handle sizes proportioned to optimise torque setting.
Handle: Audible and perceptible click when the pre-set torque has been attained.
Handle: Compatible with all blades of the 2859.
For applications in mechanics
Bit holders or blades are not included in delivery.
DIN EN ISO 6789.
Starting from∗ ： 98.56 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver TorqueVario®-S ESD, Variably Adjustable Torque Limit
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Application: For controlled fastening at a specific torque on components susceptible to electrostatic discharge.
Extra: Delivered in practical plastic box, incl. factory calibration certificate.
Supplementary information: Precision in range of 0.1-0.46 Nm.
Accuracy: ±6%, tracing to national standards (see table for other tolerances).
Handle: Torque infinitely adjustable with Torque-Setter setting tool (also supplied).
Handle: Ergonomic multi-component handle, made of ESD-safe dissipative material.
Handle: Handle sizes proportioned to optimise torque setting.
Handle: Audible and perceptible click when the pre-set torque has been attained.
Handle: Surface resistance 10^6 - 10^9 ohms.
Handle: Compatible with all blades of the 2859.
Standards: IEC 61340-5-1.
Users risk damaging electronic components irreparably when working on them. Such problems become a thing of the past with the TorqueVario®-S ESD torque screwdriver set. The ESD torque screwdriver is manufactured in line with the IEC 61340-5-1 international standard and thus guarantees maximum protection for electronic components. The dissipative tool handle has a surface resistance between 106 and 109 ohm and safely channels electrostatic energy away in a controlled fashion. The torque screwdriver also ensures controlled screw tightening. Thanks to its integrated numeric scale and the supplied adjusting tool, variable torque settings can be made, therefore covering a wide application field. A clearly audible and tactile signal is emitted when triggering the set torque value, guaranteeing process-safe work, protecting material and eliminating follow-up work. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. The set includes a bit holder for 1/4" bits. The ESD torque screwdriver is also compatible with 4 mm Wiha Torque interchangeable blades (series 2859). All tools in the set are safely stored neatly away in a robust, clearly organised box.
For applications in electronics
DIN EN ISO 6789.
Starting from∗ ： 126.53 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver TorqueVario®-S Electric, Variably Adjustable Torque Limit
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Lowers your costs: The correct torque protects you from warranty claims.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For controlled fastening on live parts up to 1 000 V AC.
Standards: Manufactured acc. to IEC 60900.
The fully certified TorqueVario®-S VDE torque system provides controlled screw tightening combined with safe use for electric installations. The tool set contains an ergonomically shaped torque screwdriver with an integrated numeric scale, a bit holder and an adjusting tool. All components are arranged practically in a high-grade, hard-wearing bag, where they are easy to identify. The VDE torque screwdriver covers a wide variety of applications with a torque range between 0.5 and 2.0 Nm. A clearly audible, physically perceptible signal emitted when the torque is produced guarantees process safe torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. The insulated ClicFix bit holder guarantees a secure hold for 75 mm long slimBits thanks to mechanical blade locking. Both the torque screwdriver and the slimBits undergo an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
For applications in electrics
DIN EN ISO 6789.
Starting from∗ ： 147.60 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Blade, Pozidriv, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Application: For controlled fastening with the pre-set torque.
Blade tip DIN ISO 8764-1.
Starting from∗ ： 4.83 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver Set TorqueVario®-S, 0.8–5.0 Nm, TORX®, TORX PLUS®, 14 Pieces, Variably Adjustable Torque Limit in Box
WIHA
Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade.
Extra: Incl. works inspection protocol.
Extra: Delivered in practical plastic box.
Accuracy: ±6%, traceable to national standards.
Handle: Torque infinitely adjustable with Torque-Setter setting tool (also supplied).
Handle: Ergonomic multi-component handle, particulary light and compact.
Handle: Audible and perceptible click when the pre-set torque has been attained.
The TorqueVario®-S torque screwdriver set provides the right torque for process safety. The tool set contains an ergonomically shaped torque screwdriver with an integrated numeric scale, 10 standard bits for all applications, a bit holder and an adjusting tool. All components are arranged practically in a high-grade, sturdy box, where they are easy to identify. The torque screwdriver covers a wide variety of applications with a torque range between 0.8 and 5.0 Nm. A clearly audible, physically perceptible signal emitted when the torque is produced guarantees process safe torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements.
For applications in mechanics
Bit holders or blades are not included in delivery.
DIN EN ISO 6789.
Content:
- 1x Torque screwdriver TorqueVario®-S variably adjustable torque limit 0.8 - 5 (26463)
- 1x Bit holder clamping with ball for torque screwdriver with long handle 1/4" (27526)
- 1x Setting tool for torque screwdriver with long handle 90 mm (26864)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T7 (01713)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T8 (01714)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T9 (01715)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T10 (01716)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 1x Bit Standard 25 mm TORX PLUS® 1/4" C6,3 7IP (23175)
- 1x Bit Standard 25 mm TORX PLUS® 1/4" C6,3 8IP (23177)
- 1x Bit Standard 25 mm TORX PLUS® 1/4" C6,3 9IP (23179)
- 1x Bit Standard 25 mm TORX PLUS® 1/4" C6,3 10IP (23181)
- 1x Bit Standard 25 mm TORX PLUS® 1/4" C6,3 15IP (23183)
- 1x Box
Starting from∗ ： 130.64 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver Set TorqueVario®-S, 0.8–5.0 Nm, Mixed, 14 Pieces, Variably Adjustable Torque Limit in Box
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Simplifies your work: All tools securely arranged in a robust and clearly laid out box.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Lowers your costs: The correct torque protects you from warranty claims.
Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade.
Extra: Incl. works inspection protocol.
Extra: Delivered in practical plastic box.
The TorqueVario®-S torque screwdriver set provides the right torque for process safety. The tool set contains an ergonomically shaped torque screwdriver with an integrated numeric scale, 10 standard bits for all applications, a bit holder and an adjusting tool. All components are arranged practically in a high-grade, sturdy box, where they are easy to identify. The torque screwdriver covers a wide variety of applications with a torque range between 0.8 and 5.0 Nm. A clearly audible, physically perceptible signal emitted when the torque is produced guarantees process safe torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements.
For applications in mechanics
Bit holders or blades are not included in delivery.
DIN EN ISO 6789.
Content:
- 1x Torque screwdriver TorqueVario®-S variably adjustable torque limit 0.8 - 5 (26463)
- 1x Bit holder clamping with ball for torque screwdriver with long handle 1/4" (27526)
- 1x Setting tool for torque screwdriver with long handle 90 mm (26864)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T10 (01716)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 3.0 mm (01705)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 4.0 mm (01706)
- 1x Box
Starting from∗ ： 130.64 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Screwdriver Set TorqueVario®-S ESD, 0.4-1.0 Nm, Assorted, Variably Adjustable Torque Limit, 14 Pieces in Box
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Simplifies your work: All tools securely arranged in a robust, orderly bag.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Application: For controlled fastening at a specific torque on components susceptible to electrostatic discharge.
Extra: Delivered in practical plastic box, incl. factory calibration certificate.
Standards: IEC 61340-5-1.
Users risk damaging electronic components irreparably when working on them. Such problems become a thing of the past with the TorqueVario®-S ESD torque screwdriver set. The ESD torque screwdriver is manufactured in line with the IEC 61340-5-1 international standard and thus guarantees maximum protection for electronic components. The dissipative tool handle has a surface resistance between 106 and 109 ohm and safely channels electrostatic energy away in a controlled fashion. The torque screwdriver also ensures controlled screw tightening. Thanks to its integrated numeric scale and the supplied adjusting tool, variable torque settings can be made, therefore covering a wide application field. A clearly audible and tactile signal is emitted when triggering the set torque value, guaranteeing process-safe work, protecting material and eliminating follow-up work. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. The set includes a bit holder for 1/4" bits. The ESD torque screwdriver is also compatible with 4 mm Wiha Torque interchangeable blades (series 2859). All tools in the set are safely stored neatly away in a robust, clearly organised box.
For applications in electronics
DIN EN ISO 6789.
Content:
- 1x Torque screwdriver TorqueVario®-S ESD variably adjustable torque limit 0.4 - 1 (26629)
- 1x Bit holder clamping with ball for torque screwdriver with long handle 1/4" (27526)
- 1x Setting tool for torque screwdriver with long handle 90 mm (26864)
- 1x Bit Standard 25 mm Slotted 4,0 mm
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 4.5 mm (01623)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH0 (05298)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ0 (05300)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T4 (25097)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T5 (01711)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T6 (01712)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T8 (01714)
- 1x Box
Starting from∗ ： 152.75 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Interchangeable Blade, Phillips, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Application: For controlled fastening with the pre-set torque.
Blade tip DIN ISO 8764-1.
Starting from∗ ： 4.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Interchangeable Blade, Internal Square, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Solve every fastening task with the Wiha nut driver range.
Application: For controlled fastening with the pre-set torque.
Starting from∗ ： 7.49 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Blade, Hexagon, for Torque Screwdriver with T-Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Application: For controlled fastening with the pre-set torque.
Starting from∗ ： 7.04 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Interchangeable Blade, Hexagon, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Application: For controlled fastening with the pre-set torque.
Starting from∗ ： 4.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Interchangeable Blade, Hexagon Ball End, for Torque Screwdriver with Long Handle
WIHA
Simplifies your work: The ball end facilitates access to screws and allows you to work at an angle of up to 25°.
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Application: For controlled fastening with the pre-set torque.
Extra: The ball end enables the user to work at angles up to 25°.
Starting from∗ ： 4.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Interchangeable Electric Blade, TORX®, for Torque Screwdriver with T-Handle Electric
WIHA
Increases your efficiency: Extensive interchangeable blade system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slim interchangeable blades ensure unlimited and fully-insulated access to low-lying screws.
Application: In combination with the Wiha torque screwdriver with T-handle TorqueVario®-S T electric, it is ideal for controlled fastening of predefined torques for tasks such as industrial assembly work.
Safety is the top priority when users are working on live parts. In combination with the insulated Wiha torque screwdriver T-handle TorqueVario®-S electric, the interchangeable blade electric enables controlled fastening and loosening of screws. The insulated interchangeable blade is subject to individual piece testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
Only compatible with Wiha torque screwdriver with T-handle TorqueVario®-S T electric
Manufactured acc. to IEC 60900.
Starting from∗ ： 10.25 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Electric Blade, Hexagon, for Torque Screwdriver with T-Handle Electric
WIHA
Increases your efficiency: Extensive interchangeable blade system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slim interchangeable blades ensure unlimited and fully-insulated access to low-lying screws.
Application: In combination with the Wiha torque screwdriver with T-handle TorqueVario®-S T electric, it is ideal for controlled fastening of predefined torques for tasks such as industrial assembly work.
Safety is the top priority when users are working on live parts. In combination with the insulated Wiha torque screwdriver T-handle TorqueVario®-S electric, the interchangeable blade electric enables controlled fastening and loosening of screws. The insulated interchangeable blade is subject to individual piece testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
Only compatible with Wiha torque screwdriver with T-handle TorqueVario®-S T electric
Manufactured acc. to IEC 60900.
Starting from∗ ： 10.25 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Electric Blade, Hexagon Nut Driver for Torque Screwdriver with T-Handle Electric
WIHA
Increases your efficiency: Extensive interchangeable blade system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: In combination with the Wiha torque screwdriver with T-handle TorqueVario®-S T electric, it is ideal for controlled fastening of predefined torques for tasks such as industrial assembly work.
Safety is the top priority when users are working on live parts. In combination with the insulated Wiha torque screwdriver T-handle TorqueVario®-S electric, the interchangeable blade electric enables controlled fastening and loosening of screws. The insulated interchangeable blade is subject to individual piece testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
Only compatible with Wiha torque screwdriver with T-handle TorqueVario®-S T electric
Manufactured acc. to IEC 60900.
Starting from∗ ： 12.03 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Blade, TORX®, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Application: For controlled fastening with the pre-set torque.
Extra: Very slim blade diameter for hard-to-reach screws.
Starting from∗ ： 4.83 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Blade, TORX®, for Torque Screwdriver with Key Handle
WIHA
Application: For controlled fastening with the pre-set torque.
Extra: Very slim blade diameter for hard-to-reach screws.
Starting from∗ ： 4.40 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Blade, TORX® MagicSpring®, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Increases your efficiency: Wiha MagicSpring® holding feature holds all Torx® screws in place without a magnet.
Application: For controlled fastening with the pre-set torque.
Extra: Very slim blade diameter for hard-to-reach screws.
Starting from∗ ： 6.08 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Blade, TORX PLUS®, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Application: For controlled fastening with the pre-set torque.
Extra: Very slim blade diameter for hard-to-reach screws.
Starting from∗ ： 2.96 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Insulated Square Adapter, 3/8" for 1/4" Nut Driver
WIHA
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your efficiency: Adapter allows 1/4" nut driver fastening with the 3/8" torque key.
Application: Combined with the 3/8"" torque key, the 1/4"" nut driver inserts can be used for fastening of hex screws.
For working on live parts up to 1,000 V AC.Safety is top priority when users are working on live parts. The square adapter for nut drivers in combination with the Wiha 3/8" torque key allows the use of insulated ¼" nut driver inserts. The adapter is designed for up to 25 Nm power transmission for the controlled fastening and loosening of hex screws and bolts. The insulated nut driver adapter is subject to individual piece testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
For applications in electrics
Only compatible with the 3/8" torque key for up to 25 Nm.
DIN EN/IEC 60900.
Starting from∗ ： 23.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cable Key for Circular Plug Connector, Hexagon Head for Torque Screwdriver with Long Handle
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Simplifies your work: All tools securely arranged in a robust, orderly bag.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Lowers your costs: The correct torque protects you from warranty claims.
Application: For controlled fastening of circular plug connectors with hexagonal head according to specified torque.
Starting from∗ ： 24.28 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adapter Blade for Torque Screwdriver with T-Handle
WIHA
Increases your efficiency: Solve every fastening task with the Wiha nut driver range.
Application: For controlled turning of screws with bits at a prescribed torque.
Starting from∗ ： 13.64 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Type |
| Torque Adjustment Range (cN/m) |
| Tip Type |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| With or without idling function |
| Tip size / flathead (-) blade thickness (mm) B2 |
| Torque Precision (±%) |
| Bit Individual Product, Set Product |
| Minimum gradation (cN·m) |
| Overall length (mm) |
| Load direction |
| Bit Quantity |
| Presence of magnet at the blade tip |
| Tip two-sided width size |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA |
| Product Series | Torque Adapter easyTorque Electric, for slimBits and slimVario® Holder in Blister | Torque Screwdriver easyTorque, Permanently Pre-Set Torque Limit | Interchangeable Blade, Hexagon, for Torque Screwdriver with Key Handle | Interchangeable Blade, TORX®, for Torque Screwdriver with T-Handle | Torque Screwdriver TorqueFix®, Permanently Pre-Set Torque Limit | Torque Set easyTorque Adapter Electric, 0.8 Nm with slimVario® Holder and SL/PZ slimBits, 4 Pieces | Torque Set easyTorque Adapter Electric, for slimBits and slimVario® Holder, 5 Pieces | Interchangeable Blade, TORX PLUS® MagicSpring®, for Torque Screwdriver with Long Handle | Torque Set easyTorque Adapter Electric, 2.8 Nm with slimVario® Holder and SL/PZ slimBits, 4 Pieces | Torque Set easyTorque Adapter Electric, 2.0 Nm with slimVario® Holder and SL/PZ slimBits, 4 Pieces | Torque Screwdriver with T-Handle TorqueVario®-S T, 5-14 Nm, Variably Adjustable Torque Limit | Torque Screwdriver with T-Handle TorqueFix® T, Permanently Pre-Set Torque Limit | Interchangeable Blade, Slotted, for Torque Screwdriver with Long Handle | Torque Screwdriver with Key Handle TorqueFix® Key, Permanently Pre-Set Torque Limit | Torque Screwdriver TorqueVario®-S, Variably Adjustable Torque Limit | Torque Screwdriver TorqueVario®-S ESD, Variably Adjustable Torque Limit | Torque Screwdriver TorqueVario®-S Electric, Variably Adjustable Torque Limit | Interchangeable Blade, Pozidriv, for Torque Screwdriver with Long Handle | Interchangeable Blade, Phillips, for Torque Screwdriver with Long Handle | Interchangeable Blade, Internal Square, for Torque Screwdriver with Long Handle | Interchangeable Blade, Hexagon, for Torque Screwdriver with T-Handle | Interchangeable Blade, Hexagon, for Torque Screwdriver with Long Handle | Interchangeable Blade, Hexagon Ball End, for Torque Screwdriver with Long Handle | Interchangeable Electric Blade, TORX®, for Torque Screwdriver with T-Handle Electric | Interchangeable Electric Blade, Hexagon, for Torque Screwdriver with T-Handle Electric | Interchangeable Electric Blade, Hexagon Nut Driver for Torque Screwdriver with T-Handle Electric | Interchangeable Blade, TORX®, for Torque Screwdriver with Long Handle | Interchangeable Blade, TORX®, for Torque Screwdriver with Key Handle | Interchangeable Blade, TORX® MagicSpring®, for Torque Screwdriver with Long Handle | Interchangeable Blade, TORX PLUS®, for Torque Screwdriver with Long Handle | Cable Key for Circular Plug Connector, Hexagon Head for Torque Screwdriver with Long Handle | ||||||||||||
| Starting from∗ | 32.67 € *Unit price with basic configuration | 147.69 € *Unit price with basic configuration | 180.81 € *Unit price with basic configuration | 198.11 € *Unit price with basic configuration | 35.52 € *Unit price with basic configuration | 4.40 € *Unit price with basic configuration | 7.04 € *Unit price with basic configuration | 80.99 € *Unit price with basic configuration | 212.36 € *Unit price with basic configuration | 59.41 € *Unit price with basic configuration | 160.43 € *Unit price with basic configuration | 137.12 € *Unit price with basic configuration | 3.80 € *Unit price with basic configuration | 60.83 € *Unit price with basic configuration | 60.83 € *Unit price with basic configuration | 181.20 € *Unit price with basic configuration | 184.69 € *Unit price with basic configuration | 160.11 € *Unit price with basic configuration | 4.83 € *Unit price with basic configuration | 219.51 € *Unit price with basic configuration | 51.49 € *Unit price with basic configuration | 98.56 € *Unit price with basic configuration | 126.53 € *Unit price with basic configuration | 147.60 € *Unit price with basic configuration | 4.83 € *Unit price with basic configuration | 130.64 € *Unit price with basic configuration | 130.64 € *Unit price with basic configuration | 152.75 € *Unit price with basic configuration | 4.83 € *Unit price with basic configuration | 7.49 € *Unit price with basic configuration | 7.04 € *Unit price with basic configuration | 4.83 € *Unit price with basic configuration | 4.83 € *Unit price with basic configuration | 10.25 € *Unit price with basic configuration | 10.25 € *Unit price with basic configuration | 12.03 € *Unit price with basic configuration | 4.83 € *Unit price with basic configuration | 4.40 € *Unit price with basic configuration | 6.08 € *Unit price with basic configuration | 2.96 € *Unit price with basic configuration | 23.97 € *Unit price with basic configuration | 24.28 € *Unit price with basic configuration | 13.64 € *Unit price with basic configuration |
| Min. Shipping Days ： | 7 Days | 7 Days | 3 Days | 3 Days | 3 Days | 3 Days | 7 Days | 3 Days | 3 Days | 7 Days | 7 Days | 7 Days | 3 Days | 7 Days | 7 Days | 3 Days | 3 Days | 3 Days | 7 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 7 Days | 5 Days | 3 Days | 7 Days | 5 Days | 5 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 5 Days | 5 Days | 7 Days |
| Product Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Torque Adjustment Range (cN/m) | - | - | 80-500 | - | 140 ～ 200 | - | - | - | 100-500 | - | - | - | - | - | - | - | 500-1400 | - | - | - | 50 ～ 400 | - | - | - | - | 100-500 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip size / Phillips (+) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With or without idling function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Torque Precision (±%) | - | - | 6 | - | 10 | - | - | - | 6 | - | - | - | - | - | - | - | 6 | - | - | - | 6 | - | - | - | - | 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Bit Individual Product, Set Product | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Minimum gradation (cN·m) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall length (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 56 | - | - | - | 68 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Load direction | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Bit Quantity | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Presence of magnet at the blade tip | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip two-sided width size | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Type
- Preset
- Dial Type
- Single Function Type
-
Torque Adjustment Range (cN/m)
-
Tip Type
- Torx Type (Hexalobular)
-
Tip size / Phillips (+)
-
Tip size / flathead (-) blade width (mm) B1
-
With or without idling function
- Available
- N/A
-
Tip size / flathead (-) blade thickness (mm) B2
-
Torque Precision (±%)
-
Bit Individual Product, Set Product
- Single Item
- Set Product
-
Minimum gradation (cN·m)
-
Overall length (mm)
-
Load direction
- Right
- Left/Right
-
Bit Quantity
-
Presence of magnet at the blade tip
- Available
-
Tip two-sided width size
Narrow search by specifying Brand
-
- WERA (52)
- WIHA (43)
- GEDORE (27)
- BAHCO (11)
- ESCO (9)
- NAKAMURA MFG (8)
- MAEDAKINNZOKU (7)
- HAZET (4)
- TOHNICHI MFG (4)
- CIMCO (3)
- BERNSTEIN AG (3)
- PB SWISS TOOLS (2)
- PHOENIX CONTACT (2)
- KNIPEX (1)
- HALDER (1)
- WEIDMUELLER (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Torque Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Hexalobular Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter, rotary cutter, scalpel knife
- Chisels
- Screwdriver Bits
- Tweezers, clamps, pliers
- Engravers/Punches
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Tools Used at Electric Facilities
-
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.