Positioning tables, X-axis（Page 2）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 12 Days or Less 15 Days or Less

?* Information on days to ship and prices

X-Axis Stage 30X30 Small Rail Stage (X-Axis) (Manual Stage)

CHUO PRECISION INDUSTRIAL

X-axis mobile unit handling differing feed methods within a space measuring 30 mm×30 mm.

[Features]
· X-axis mobile unit handling differing feed methods within a space measuring 30 mm × 30 mm.
· The SRS-1 is inexpensive and capable of fine adjustment with the 0.5-mm pitch feed auger.
· The LS-311 employs a rack and pinion feeding method, achieving large distance movements.
· Can be widely used for applications requiring the positioning of cameras, sensors, and other items

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	150.00 €
Min. Shipping Days ：	23 Days

*Unit price with basic configuration

Long Working Stage (Manual Stage)

CHUO PRECISION INDUSTRIAL

This is a long working mobile unit which uses a dovetail groove for the motion guide.

[Features]
· A block for long working stages.
· You can add to a rail.
· Four handle types are available.
· Includes index sticker.
· Can be pasted to any position

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	207.34 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Block for Long Working Stage (Manual Stage)

CHUO PRECISION INDUSTRIAL

[Features]
· A block for long working stages.
· Can be added to a rail.
· Four handle types are available.
· Includes index sticker.
· Can be adhered in any position

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	122.22 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

X-Axis Slim Stage (Manual Stage)

CHUO PRECISION INDUSTRIAL

[Features]
· A thin type lightweight stage that uses a V groove and cross roller (V-CR type) for the movement guide.
· The operating section can be attached on the center, the side, and the reverse side.
· Can be used for a wide range of purposes such as precise positioning of the work piece and as a sampling stage of measurement equipment.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	311.33 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

VCR High-Precision X-Axis Stage (Manual Stage)

CHUO PRECISION INDUSTRIAL

[Features]
· High-precision stage using V-groove and cross roller (V-CR type) for the travel guide.
· Available with a Vernier scale or magnescale.
· Can be used for a wide range of purposes such as precise positioning of the work and a sampling stage for measurement equipment.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	869.22 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Manual X Axis, Crossed Roller Bearing Stages: 25×25 / 25×40 / 25×60 / 40×40 / 40×80 / 60×100 / 60×60 / 80×80 / 100×100 / 120×120 / 150×150 mm [S1-100]

DPI

Manufactured overseas — competitively priced.

Select to compare

Configure now
Starting from^∗ ：	147.98 €
Min. Shipping Days ：	16 Days

*Unit price with basic configuration

Dovetail slide with micrometer spindle, grey cast iron, with handwheel (21033)

NORELEM

· Scale ring with scale division 0.02 mm

· Dimensioned for dynamic loads of up to 917 N

· Service life of over 1 million lifting operations

· Different sizes with strokes from 50 to 100 mm

· All outer faces are ground

Select to compare

Configure now
Starting from^∗ ：	1,619.36 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Precision slide with micrometer spindle, mounted on roller bearings, grey cast iron (21040)

NORELEM

· Micrometer knurl with scale division 0.02 mm

· Dimensioned for dynamic and static loads of up to 1130 N

· Different sizes with strokes from 10 to 150 mm

· Service life of over 1 million lifting operations

· All outer faces are ground

Select to compare

Configure now
Starting from^∗ ：	892.68 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

[Precision] X-Axis / Dovetail / Rack&Pinion / Coarse&Fine Adjustment

MISUMI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	350.36 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

[Precision] X-Axis / Dovetail / Rack&Pinion / Long Stroke / Multiple Blocks

MISUMI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	482.99 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

[Precision] X-Axis / Cross Roller / Long Stroke

MISUMI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	458.42 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

[Precision] X-Axis / Dovetail / Thin / Handle Extension

MISUMI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	291.43 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

[Precision] X-Axis / Dovetail / Tamper Proof Adjustment

MISUMI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	325.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

[Precision] X-Axis / Dovetail / Rack&Pinion / Tamper Proof Adjustment

MISUMI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	299.61 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

[Standard] X-Axis / Dovetail / Rapid Feed Screw

MISUMI

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	147.35 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

X Axis Rack & Pinion Stage, TAR

NABEYA BI-TECH

The rack and pinion method enables quicker feed motion. The motion guide utilizes a dovetail groove method. Equipped with a backlash-correction feature.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	357.45 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Small X-Axis Block Stage TAS

NABEYA BI-TECH

*The CAD data for this series is being revised. This will be available as soon as modifications are complete

[Features]
- Move the stage with a hex wrench.
- Screws are used for micro-feeding.
- Dovetail grooves used for the travel guide.
- Has a mechanism for correcting rattling.
- New design with lowered stage height.
- Effective for limited spaces or embedded use.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	183.93 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

X Axis, Coarse / Fine Motion Rack and Pinion Stage, TAR

NABEYA BI-TECH

A coarse-movement / fine-movement X axis stage. The rack and pinion method enables quicker feed motion. The motion guide utilizes a dovetail groove method. Equipped with a backlash-correction feature.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	564.12 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

X-Axis Feed Screw Stage - TAS

NABEYA BI-TECH

[Features]
· Movement is possible along both axes; the X axis and the Y axis.
· Screws are used for micro-feeding.
· A dovetail groove type is used for the travel guide.
· Has a mechanism for correcting rattling.
· Material and finish - Stage: Brass and black chrome plating.
· Main body: Brass and paint (silver for TAS-30XY; black for TAS-60XY).
· Bottom spacer: Aluminum alloy and anodized aluminum.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	257.75 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

X-Axis Aluminum Cross Roller Stage TAM

NABEYA BI-TECH

Aluminum stage.

[Features]
- 4 different stage sizes.
- Aluminum.
- Lightweight.
- Uses a V groove rail and cross roller for the travel guide.
- Micrometer feed type.
- 0.01 m feeding display resolution.
- Stage/main body materials: Aluminum alloy and anodization (black).

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	623.99 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

High-Grade Aluminum X Stage (Manual Stage)

CHUO PRECISION INDUSTRIAL

A lightweight, rigid HG-VDR stage that uses aluminum alloy as its main material.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	187.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DT X-Axis Stage (Manual Stage)

CHUO PRECISION INDUSTRIAL

An X-axis mobile unit that handles differing feed methods within a space measuring 30 mm × 30 mm.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	132.34 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Thin X-Axis Fixed Stage (Manual Stage)

CHUO PRECISION INDUSTRIAL

Similar to a conventional fixed stage, but takes up no more room than a spacer. Especially handy for use in space-constrained situations thanks to its special clamp-free operation.

[Features]
▪ Employs a lock-less mechanism; the stage will not move once set in position
▪ Natural self-locking design prevents backlash
▪ Amazingly thin compared to conventional stages
▪ Position workpieces in no more width than a spacer occupies (8 mm)

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	234.21 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

X-Axis Linear Ball Guide Stage BXT Series

SURUGA SEIKI

Surprisingly low-priced.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	143.36 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Master Technique Stage (X Axis)

MIRUC OPTICAL

It realizes high quality and low price with skillful dovetail groove friction technology. It features smooth sliding and high durability. The clamping lever increases the holding force, and the position and direction of the lever can be freely adjusted. Viscoelastic material applied to the fixed part of the screw absorbs and dampens vibrations and shocks and prevents the screws from loosening.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	171.68 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Long Stage (X Axis)

MIRUC OPTICAL

Lightweight, slim, long stroke

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	201.87 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Multi-Function Feed Auger Stage (X Axis)

MIRUC OPTICAL

Many variations are available with different travel distances per handle revolution.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	233.61 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Front Lock Stage (X Axis)

MIRUC OPTICAL

Changing the thinking around miniature stages

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	131.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Dovetail Slide Stage XMA Series Square Type

MIRUC OPTICAL

Achieves a reduction in costs via a reduction in parts quantity and man-hours.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	99.24 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Dovetail Slide Stage XMA Series Rectangular Type

MIRUC OPTICAL

Cost reduction is achieved by reducing the number of parts and labour hours. X-axis rectangular type. 2 types of table surfaces (mm): 30 × 50 and 40 × 80.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	101.22 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Dovetail Slide Stage XMA Series Slim Long Type

MIRUC OPTICAL

Achieves a reduction in costs via a reduction in parts quantity and man-hours.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	125.55 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Dovetail Slide Stage XMB Series Rectangular Type

MIRUC OPTICAL

Cost reduction is achieved by reducing the number of parts and man-hours. X-axis rectangular type. 2 types of table surfaces (mm): 30 × 50 and 40 × 80.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	103.13 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

X-Axis Manual Stage Cross Roller 80

DPI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	151.58 €
Min. Shipping Days ：	16 Days

*Unit price with basic configuration

X-Axis Manual Stage Cross Roller 80_2

DPI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	206.14 €
Min. Shipping Days ：	19 Days

*Unit price with basic configuration

X-Axis Manual Stage Cross Roller 610

DPI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	169.36 €
Min. Shipping Days ：	16 Days

*Unit price with basic configuration

X-Axis Manual Stage Cross Roller 60_2

DPI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	184.02 €
Min. Shipping Days ：	19 Days

*Unit price with basic configuration

X-Axis Manual Stage Cross Roller 40

DPI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	171.62 €
Min. Shipping Days ：	19 Days

*Unit price with basic configuration

X-Axis Manual Stage Cross Roller 4

DPI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	147.98 €
Min. Shipping Days ：	16 Days

*Unit price with basic configuration

X-Axis Manual Stage Cross Roller 150

DPI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	322.75 €
Min. Shipping Days ：	16 Days

*Unit price with basic configuration

X-Axis Manual Stage Cross Roller 100

DPI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	198.02 €
Min. Shipping Days ：	16 Days

*Unit price with basic configuration

X-Axis Manual Stage Dovetail Screw

DPI

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	112.27 €
Min. Shipping Days ：	19 Days

*Unit price with basic configuration

Transmission-Type X-Axis Fixed Stage

CHUO PRECISION INDUSTRIAL

[Features]
· Clampless stage that stays in place after position adjustment.
· Special mechanism to prevent backlash.
· Use hex wrench to adjust position. * Hex wrench not included.
· Supports specially shaped wrenches instead of hex wrench (optional).
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment instead of requiring constant adjustment.
· The stage has a transmission hole at the center.
· Can be installed horizontally, vertically and upside-down.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	327.81 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Dovetail slide, grey cast iron (21030)

NORELEM

· Dimensioned for dynamic loads of up to 227 N

· Service life of over 1 million lifting operations

· Different sizes with strokes from 15 to 30 mm

· All outer faces are ground

Select to compare

Configure now
Starting from^∗ ：	388.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Dovetail slide with end stop, grey cast iron (21031)

NORELEM

· Dimensioned for dynamic loads of up to 395 N

· Service life of over 1 million lifting operations

· Different sizes with strokes from 25 to 100 mm

· All outer faces are ground

Select to compare

Configure now
Starting from^∗ ：	410.22 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Dovetail slide with micrometer spindle, grey cast iron (21032)

NORELEM

· Micrometer knurl with scale division 0.02 mm

· Dimensioned for dynamic loads of up to 1078 N

· Service life of over 1 million lifting operations

· Different sizes with strokes from 25 to 100 mm

· All outer faces are ground

Select to compare

Configure now
Starting from^∗ ：	716.74 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Table Size (Length) L (Range Selectable)(mm)
Table Size (Width) W (Range Selectable)(mm)
Load Capacity (Range Selectable)(N)
Stroke (Range Selectable)
Feeding Method
Table Material
Table Surface Treatment
Guiding Mechanism
Table Size (Thickness) H (Range Selectable)(mm)
Category

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	DPI	NORELEM	NORELEM	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	SURUGA SEIKI	MIRUC OPTICAL	MIRUC OPTICAL	MIRUC OPTICAL	MIRUC OPTICAL	MIRUC OPTICAL	MIRUC OPTICAL	MIRUC OPTICAL	MIRUC OPTICAL	DPI	DPI	DPI	DPI	DPI	DPI	DPI	DPI	DPI	CHUO PRECISION INDUSTRIAL	NORELEM	NORELEM	NORELEM
Product Series	X-Axis Stage 30X30 Small Rail Stage (X-Axis) (Manual Stage)	Long Working Stage (Manual Stage)	Block for Long Working Stage (Manual Stage)	X-Axis Slim Stage (Manual Stage)	VCR High-Precision X-Axis Stage (Manual Stage)	Manual X Axis, Crossed Roller Bearing Stages: 25×25 / 25×40 / 25×60 / 40×40 / 40×80 / 60×100 / 60×60 / 80×80 / 100×100 / 120×120 / 150×150 mm [S1-100]	Dovetail slide with micrometer spindle, grey cast iron, with handwheel (21033)	Precision slide with micrometer spindle, mounted on roller bearings, grey cast iron (21040)	[Precision] X-Axis / Dovetail / Rack&Pinion / Coarse&Fine Adjustment	[Precision] X-Axis / Dovetail / Rack&Pinion / Long Stroke / Multiple Blocks	[Precision] X-Axis / Cross Roller / Long Stroke	[Precision] X-Axis / Dovetail / Thin / Handle Extension	[Precision] X-Axis / Dovetail / Tamper Proof Adjustment	[Precision] X-Axis / Dovetail / Rack&Pinion / Tamper Proof Adjustment	[Standard] X-Axis / Dovetail / Rapid Feed Screw	X Axis Rack & Pinion Stage, TAR	Small X-Axis Block Stage TAS	X Axis, Coarse / Fine Motion Rack and Pinion Stage, TAR	X-Axis Feed Screw Stage - TAS	X-Axis Aluminum Cross Roller Stage TAM	High-Grade Aluminum X Stage (Manual Stage)	DT X-Axis Stage (Manual Stage)	Thin X-Axis Fixed Stage (Manual Stage)	X-Axis Linear Ball Guide Stage BXT Series	Master Technique Stage (X Axis)	Long Stage (X Axis)	Multi-Function Feed Auger Stage (X Axis)	Front Lock Stage (X Axis)	Dovetail Slide Stage XMA Series Square Type	Dovetail Slide Stage XMA Series Rectangular Type	Dovetail Slide Stage XMA Series Slim Long Type	Dovetail Slide Stage XMB Series Rectangular Type	X-Axis Manual Stage Cross Roller 80	X-Axis Manual Stage Cross Roller 80_2	X-Axis Manual Stage Cross Roller 610	X-Axis Manual Stage Cross Roller 60_2	X-Axis Manual Stage Cross Roller 40	X-Axis Manual Stage Cross Roller 4	X-Axis Manual Stage Cross Roller 150	X-Axis Manual Stage Cross Roller 100	X-Axis Manual Stage Dovetail Screw	Transmission-Type X-Axis Fixed Stage	Dovetail slide, grey cast iron (21030)	Dovetail slide with end stop, grey cast iron (21031)	Dovetail slide with micrometer spindle, grey cast iron (21032)
CAD	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D				2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D	2D	2D	2D	2D	2D	2D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	150.00 € *Unit price with basic configuration	207.34 € *Unit price with basic configuration Volume Discount	122.22 € *Unit price with basic configuration Volume Discount	311.33 € *Unit price with basic configuration Volume Discount	869.22 € *Unit price with basic configuration	147.98 € *Unit price with basic configuration	1,619.36 € *Unit price with basic configuration	892.68 € *Unit price with basic configuration	350.36 € *Unit price with basic configuration	482.99 € *Unit price with basic configuration	458.42 € *Unit price with basic configuration	291.43 € *Unit price with basic configuration	325.81 € *Unit price with basic configuration	299.61 € *Unit price with basic configuration	147.35 € *Unit price with basic configuration	357.45 € *Unit price with basic configuration	183.93 € *Unit price with basic configuration	564.12 € *Unit price with basic configuration	257.75 € *Unit price with basic configuration	623.99 € *Unit price with basic configuration	187.90 € *Unit price with basic configuration Volume Discount	132.34 € *Unit price with basic configuration Volume Discount	234.21 € *Unit price with basic configuration Volume Discount	143.36 € *Unit price with basic configuration Volume Discount	171.68 € *Unit price with basic configuration	201.87 € *Unit price with basic configuration	233.61 € *Unit price with basic configuration	131.76 € *Unit price with basic configuration	99.24 € *Unit price with basic configuration	101.22 € *Unit price with basic configuration	125.55 € *Unit price with basic configuration	103.13 € *Unit price with basic configuration	151.58 € *Unit price with basic configuration	206.14 € *Unit price with basic configuration	169.36 € *Unit price with basic configuration	184.02 € *Unit price with basic configuration	171.62 € *Unit price with basic configuration	147.98 € *Unit price with basic configuration	322.75 € *Unit price with basic configuration	198.02 € *Unit price with basic configuration	112.27 € *Unit price with basic configuration	327.81 € *Unit price with basic configuration Volume Discount	388.97 € *Unit price with basic configuration	410.22 € *Unit price with basic configuration	716.74 € *Unit price with basic configuration
Min. Shipping Days	23 Days	5 Days	5 Days	5 Days	10 Days	16 Days	4 Days	4 Days	9 Days	5 Days	9 Days	9 Days	5 Days	9 Days	Same day	9 Days	9 Days	9 Days	9 Days	9 Days	5 Days	5 Days	5 Days	5 Days	10 Days	9 Days	9 Days	6 Days	9 Days	10 Days	9 Days	10 Days	16 Days	19 Days	16 Days	19 Days	19 Days	16 Days	16 Days	16 Days	19 Days	8 Days	4 Days	4 Days	4 Days
Specifications															Order quantities extended (D-JIT)
Table Size (Length) L (Range Selectable)(mm)	26 to 40	26 to 40	26 to 40	61 to 90 ～ 121 or More	121 or More	-	-	-	26 to 40 ～ 41 to 60	41 to 60	41 to 60 ～ 91 to 120	26 to 40 ～ 41 to 60	41 to 60 ～ 61 to 90	41 to 60 ～ 121 or More	26 to 40 ～ 61 to 90	41 to 60 ～ 61 to 90	Up to 25 ～ 26 to 40	41 to 60 ～ 61 to 90	26 to 40 ～ 41 to 60	26 to 40 ～ 91 to 120	26 to 40 ～ 61 to 90	26 to 40	26 to 40 ～ 41 to 60	26 to 40 ～ 41 to 60	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	26 to 40	-	-	-
Table Size (Width) W (Range Selectable)(mm)	26 to 40	26 to 40	26 to 40	61 to 90 ～ 121 or More	121 or More	-	-	-	26 to 40 ～ 41 to 60	26 to 40	Up to 25 ～ 41 to 60	26 to 40 ～ 41 to 60	26 to 40	Up to 25 ～ 26 to 40	26 to 40 ～ 41 to 60	26 to 40	Up to 25 ～ 26 to 40	26 to 40	Up to 25	26 to 40 ～ 91 to 120	26 to 40 ～ 61 to 90	26 to 40 ～ 121 or More	26 to 40 ～ 41 to 60	26 to 40 ～ 41 to 60	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	26 to 40	-	-	-
Load Capacity (Range Selectable)(N)	5 to 30	5 to 30	-	50.1 to 100 / 100.1 or More	100.1 or More	50.1 to 100 / 100.1 or More	-	-	5 to 30 / 30.1 to 50	30.1 to 50	5 to 30 / 50.1 to 100	5 to 30	30.1 to 50	5 to 30 / 30.1 to 50	5 to 30 / 30.1 to 50	50.1 to 100	5 to 30 / 30.1 to 50	50.1 to 100	30.1 to 50 / 50.1 to 100	5 to 30 / 50.1 to 100 / 100.1 or More	5 to 30 / 30.1 to 50 / 50.1 to 100	1 to 4.9 / 30.1 to 50	5 to 30	50.1 to 100 / 100.1 or More	100.1 or More	100.1 or More	100.1 or More	100.1 or More	100.1 or More	100.1 or More	100.1 or More	100.1 or More	50.1 to 100	100.1 or More	100.1 or More	50.1 to 100	30.1 to 50	50.1 to 100	100.1 or More	100.1 or More	5 to 30	5 to 30	-	-	-
Stroke (Range Selectable)	-	-	-	-	-	-	-	-	Up to ±10mm / ±10 to 30mm	±30mm or More	Up to ±10mm / ±10 to 30mm	±10 to 30mm	±10 to 30mm / ±30mm or More	±10 to 30mm / ±30mm or More	Up to ±10mm / ±10 to 30mm / ±30mm or More	±10 to 30mm	Up to ±10mm	±10 to 30mm	Up to ±10mm	Up to ±10mm / ±10 to 30mm	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Up to ±10mm	-	-	-
Feeding Method	Feed Screw	Rack & Pinion	-	EN 1.4125 Equiv.	Feed Screw / EN 1.4125 Equiv.	EN 1.4125 Equiv.	-	-	Rack & Pinion	Rack & Pinion	EN 1.4125 Equiv.	Feed Screw	Feed Screw	Rack & Pinion	Feed Screw	Rack & Pinion	Feed Screw	Rack & Pinion	Feed Screw	EN 1.4125 Equiv.	Feed Screw / EN 1.4125 Equiv.	Rack & Pinion	Feed Screw	EN 1.4125 Equiv.	Handle	Handle	Handle	Handle	Handle	Handle	Handle	Handle	EN 1.4125 Equiv.	EN 1.4125 Equiv.	EN 1.4125 Equiv.	EN 1.4125 Equiv.	EN 1.4125 Equiv.	EN 1.4125 Equiv.	EN 1.4125 Equiv.	EN 1.4125 Equiv.	Feed Screw	Feed Screw	-	-	-
Table Material	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Steel / Aluminum Alloy	Steel	Aluminum	-	-	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Brass	Brass	Brass	Brass	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Steel	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy	Aluminum	Steel	Aluminum	Steel	Steel	Aluminum	Aluminum	Aluminum	Brass	Aluminum Alloy	-	-	-
Table Surface Treatment	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum / LTBC Plating	Electroless Nickel Plating / LTBC Plating	Black Anodized Aluminum	-	-	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	LTBC Plating	LTBC Plating	LTBC Plating	LTBC Plating	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Electroless Nickel Plating	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	Black Oxide	Black Anodized Aluminum	Black Oxide	Black Oxide	Black Anodized Aluminum	Black Anodized Aluminum	Black Anodized Aluminum	-	Black Anodized Aluminum	-	-	-
Guiding Mechanism	Linear Ball	Dovetail Slide	-	Cross Roller	Cross Roller	Cross Roller	-	-	Dovetail Slide	Dovetail Slide	Cross Roller	Dovetail Slide	Dovetail Slide	Dovetail Slide	Dovetail Slide	Dovetail Slide	Dovetail Slide	Dovetail Slide	Dovetail Slide	Cross Roller	Cross Roller	Dovetail Slide	Slide Guide	Linear Ball	Dovetail Slide	Dovetail Slide	Dovetail Slide	Dovetail Slide	Dovetail Slide	Dovetail Slide	Dovetail Slide	Dovetail Slide	Cross Roller	Cross Roller	Cross Roller	Cross Roller	Cross Roller	Cross Roller	Cross Roller	Cross Roller	-	Slide Guide	-	-	-
Table Size (Thickness) H (Range Selectable)(mm)	-	-	-	-	-	15.1 to 20 ～ 20.1 to 25	-	-	35.1 to 40	35.1 to 40	15.1 to 20 ～ 30.1 to 35	15.1 to 20	25.1 to 30	30.1 to 35	1 to 15 ～ 15.1 to 20	30.1 to 35	1 to 15 ～ 15.1 to 20	30.1 to 35	15.1 to 20	15.1 to 20 ～ 20.1 to 25	-	-	-	15.1 to 20	-	-	-	-	-	-	-	-	15.1 to 20	15.1 to 20	15.1 to 20	15.1 to 20	15.1 to 20	15.1 to 20	20.1 to 25	15.1 to 20	15.1 to 20	-	-	-	-
Category	Main Body	Main Body	Additional Blocks	Main Body	Main Body	Main Body	-	-	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	-	-	-	-