Bearing Covers, Seals（Page 3）

276

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

NILOS Ring JVH

NILOS RING

[Specifications]
・Type: NILOS ring
・Outside diameter D(mm): 47-140
・Internal diameter d(mm): 25.7-92
・Engineering material: Zinc-plated special strip steel

NILOS-Rings for Single Row Angular Contact Ball Bearings, JVH series.

Select to compare

Configure now
Min. Shipping Days ：	5 Days

NILOS Ring ZAV

NILOS RING

[Specifications]
・Type: NILOS ring
・Outside diameter D(mm): 17.8-110.5
・Internal diameter d(mm): 6-65
・Engineering material: Chromium-nickel, Zinc-plated special strip steel

NILOS-Rings for Single Row Deep Groove Ball Bearings, ZAV series.

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Labyrinth Seal, split

FAG

[Specifications]
・Inner Diameter(mm): 184.3~274.4

Labyrinth seal, split.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	624.25 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Labyrinth Seal TSV, Material: Steel, FKM

FAG

[Specifications]
・Material: Steel, FKM
・Inner Diameter(mm): 42.7~184.2
・Outer Diameter(mm): 42.7~184.2

Labyrinth seals TSV give non-contact sealing. They are therefore suitable for high circumferential velocities. The O ring, which is pressed between the labyrinth ring and shaft, is made from fluoro rubber FKM and is suitable for temperatures of up to +200 °C. The labyrinth seal allows shaft misalignment of up to 0,5° in both directions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	40.07 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Shaft Seal, FKM, DIN 3780

DICHTOMATIK

[Specifications]
・Material: FKM
・Internal diameter(mm): 480
・Outer diameter(mm): 520

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	556.05 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

Shaft Seal, NBR, CRWHA1R, CR 71002

DICHTOMATIK

[Specifications]
・Material: NBR
・Internal diameter(mm): 100
・Outer diameter(mm): 120

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	4.47 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

Housing Seal

SKF

[Specifications]
・Material: HNBR, elastomer/ thermoplastic, metal/VMQ

[Features]
・These seals provide low friction, effective sealing against many contaminants, and accommodate axial displacement of the shaft
・In highly contaminated environments, they can serve as the first barrier in a three-barrier sealing solution
・The combination of housing seals, the grease fill in the housing, and a bearing with integral seals can have a significant impact on bearing service life

Select to compare

Configure now
Starting from^∗ ：	18.67 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Sealing Strip

SKF

[Specifications]
・Width(mm):6, 8
・Length(mm): 190, 260
・eClass code: 23-05-17-90

Felt strips, and their high-temperature variants made of aluminium borosilicate, provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt strip and the shaft, transforming the seal into a non-contact, gap-type seal. Felt strips should be cut to the correct length and soaked in hot oil prior to being installed.

[Features]
・Cost-effective
・Suitable for relatively high shaft speeds

Select to compare

Configure now
Starting from^∗ ：	16.22 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Shaft Seal, CRW1 S, VMQ

SKF

[Specifications]
・Internal diameter(mm): 53.98
・Outer diameter(mm): 73
・eClass code: 23-07-08-01

Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.

[Features]
・For oil or grease
・With garter spring
・WAVE lip creates higher pumping rate
・WAVE lip has less friction between shaft and lip
・WAVE lip has a lower temperature at the contact point

Select to compare

Configure now
Starting from^∗ ：	22.93 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

V-ring-sealing Set

SKF

[Specifications]
・Material: Steel plate/NBR
・eClass code: 23-05-17-90

V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments. They are a cost-effective and easy to install contaminant barrier for all kind of shafts. They are available in nitrile rubber.

[Features]
・Easy to install
・Many variants
・Cost-effective

Select to compare

Configure now
Starting from^∗ ：	21.78 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Airzet Piston Seal, 80NBR186349

FREUDENBERG

[Specifications]
・Material: NBR
・Internal diameter(mm): 9, 35
・External diameter(mm): 16, 42

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.30 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Airzet Piston Seal, 80NBR-B219

FREUDENBERG

[Specifications]
・Material: 80NBR B219
・Internal diameter(mm): 13~110
・External diameter(mm): 20~125

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.98 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Double-acting Scraper, Merkel, 94AU925

FREUDENBERG

[Specifications]
・Material: 94AU925
・Internal diameter(mm): 28, 50
・External diameter(mm): 36, 60

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	4.68 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Guide Ring, Piston, Polyamide-PA 4201

FREUDENBERG

[Specifications]
・Material: Polyamide
・Internal diameter(mm): 16~196
・External diameter(mm): 20~200

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	5.17 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Simmerring, 75 FKM575

FREUDENBERG

[Specifications]
・Material: FKM
・Internal diameter(mm): 35
・External diameter(mm): 72

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	50.10 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

U-ring, 75FKM99104

FREUDENBERG

[Specifications]
・Material: FKM
・Internal diameter(mm): 10~42
・External diameter(mm): 16~50

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.47 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

U-ring, 90NBR109, N1

FREUDENBERG

[Specifications]
・Material: NBR
・Internal diameter(mm): 2~180
・External diameter(mm): 7~200

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.14 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

U-ring, 94AU925, AUN100

FREUDENBERG

[Specifications]
・Material: 94AU925
・Internal diameter(mm): 10~190
・External diameter(mm): 20~210

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.82 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

U-ring, with Wiper Lip, 95AU-V142

FREUDENBERG

[Specifications]
・Material: Polyurethane
・Internal diameter(mm): 12~140
・External diameter(mm): 18~155

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.40 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Wiper, with Metal Sheet, 94AU925

FREUDENBERG

[Specifications]
・Material: 94AU925
・Internal diameter(mm): 12~200
・External diameter(mm): 20~220

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.13 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Wiper, without Metal Sheet, 88NBR101

FREUDENBERG

[Specifications]
・Material: NBR
・Internal diameter(mm): 8~125
・External diameter(mm): 16~137

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.70 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Radial Rotary Shaft Seal, RWDR Series

INA

Radial rotary shaft seal RWDR..-R-NBR, seat outer ring

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	5.57 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Sealing Ring, NTC Series

FAG

Taconite seals NTC, for SNS-housing, kombined sealing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	383.25 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

V-Ring Seal, DHV Series

FAG

In the case of V ring seals DHV, the seal lip is in axial contact with the sliding surface which is located in the rectangular section annular slot of the housing. The seal is made from NBR and is suitable, when using grease lubrication, for circumferential velocities of up to 12 m/s. If circumferential velocities of more than 8 m/s are present, axial location is necessary. The seal allows shaft misalignment of up to 0,5° in both directions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	62.38 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Seal Carrier Assembly DRS, for ZARF, ZARF..-L, with Integral Rotary Shaft Seal

INA

Seal carrier assemblies DRS, for ZARF, ZARF..-L, with integral rotary shaft seal

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	93.63 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

End cover, for SNL bearing housings / Outer diameter 276mm

SKF

[Specifications]
・Outer Diameter(mm): 276
・Width(mm): 21
・eClass code: 23-05-17-90

End covers can be used at the end of shafts instead of seals. End covers in the ETS series are designed for SNL bearing housings in sizes 34 to 96. They have good resistance to most chemicals, are robust, and can withstand high operating temperatures. End covers are easy to install and cost-effective accessories.

[Features]
・Robust design
・Good chemical resistance
・Designed for high operating temperatures
・Easy to install
・Cost-effective

Select to compare

Configure now
Starting from^∗ ：	274.77 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Sealing washer / Internal diameter 50mm

SKF

[Specifications]
・Internal diameter(mm): 50
・Outer diameter(mm): 110
・eClass code: 23-05-17-90

SKF sealing washers of the Z-type form efficient labyrinth seals that can be used in a wide variety of applications. Being primarily recommended for simple bearing arrangements, they provide inexpensive solutions to many sealing problems. The sealing efficiency depends on the washer design (standard or F design) and the number of washers used.

[Features]
・Cost-effective
・Support sealing solutions

Select to compare

Configure now
Starting from^∗ ：	15.95 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

Housing seals A Series / Internal diameter 90mm

SKF

[Specifications]
・Internal diameter(mm): 50
・Outer diameter(mm): 170.5
・eClass code: 23-05-17-90

V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments. They are a cost-effective and easy to install contaminant barrier for all kind of shafts. They are available in nitrile rubber. When ordering, please note that one item (seal pack) contains two seals.

[Features]
・Easy to install
・Many variants
・Cost-effective

Select to compare

Configure now
Starting from^∗ ：	73.17 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

Housing seals C Series / Internal diameter 85mm

SKF

[Specifications]
・Internal diameter(mm): 85
・Outer diameter(mm): 153.5
・eClass code: 23-05-17-90

Felt seals provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt and shaft, transforming the seal into a non-contact, gap-type seal. Felt seals do not limit axial movements of the shaft. When ordering, please note that one item (seal pack) contains two seals (four halves).

[Features]
・Easy to install
・Cost-effective
・Suitable for relatively high shaft speeds

Select to compare

Configure now
Starting from^∗ ：	86.82 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

Housing seals CE Series

SKF

[Specifications]
・Internal diameter(mm): 55.56
・Outer diameter(mm): 83
・eClass code: 23-05-17-90

Felt seals provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt and shaft, transforming the seal into a non-contact, gap-type seal. Felt seals do not limit axial movements of the shaft.

[Features]
・Easy to install
・Cost-effective
・Suitable for relatively high shaft speeds

Select to compare

Configure now
Starting from^∗ ：	45.65 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Housing seals F Series / Internal diameter 50mm

SKF

Select to compare

Configure now
Starting from^∗ ：	32.82 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Housing seals L Series / Internal diameter 40mm

SKF

[Specifications]
・Internal diameter(mm): 50
・Outer diameter(mm): 110
・eClass code: 23-05-17-90

SKF housing seals are the first barrier against contamination. The four-lip seals replace the former double-lip seals. The four-lip seals are more effective than the double-lip and generate less friction, which enables higher shaft speeds. For highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.

[Features]
・Good protection from contamination
・Keep the lubricant in the housing
・Part of three barrier solution

Select to compare

Configure now
Starting from^∗ ：	19.57 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Covers, Caps / Outer diameter(40~256mm)

SKF

[Specifications]
・Outer Diameter(mm): 40~256
・Width(mm): 5.5~45
・Version(g): End cover, Housing cover
・eClass code: 23-05-17-90

Select to compare

Configure now
Starting from^∗ ：	3.65 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Spacing Washer ZW-type / Width 2mm

SKF

[Specifications]
・Inner Diameter(mm): 12-80
・Outer Diameter(mm): 17-90
・Width(mm): 2

[Features]
・Cost-effective
・Enable relubrication of bearings with Z-type sealing washers

Select to compare

Configure now
Starting from^∗ ：	1.47 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Housing seals C Series / Internal diameter 20~140mm

SKF

[Specifications]
・Internal diameter(mm): 20~140
・Outer diameter(mm): 37~208.5
・Version(g): Felt seal
・eClass code: 23-05-17-90

Felt seals provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt and shaft, transforming the seal into a non-contact, gap-type seal. Felt seals do not limit axial movements of the shaft.

[Features]
・Easy to install
・Cost-effective
・Suitable for relatively high shaft speeds

Select to compare

Configure now
Starting from^∗ ：	17.22 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Housing seals F Series / Internal diameter 20~50mm

SKF

[Specifications]
・Internal diameter(mm): 20~50
・Outer diameter(mm): 42~90
・Version(g): Sealing lamellas with felt insert
・eClass code: 23-05-17-90

SKF sealing washers of the Z-type form efficient labyrinth seals that can be used in a wide variety of applications. Being primarily recommended for simple bearing arrangements, they provide inexpensive solutions to many sealing problems. The sealing efficiency depends on the washer design (standard or F design) and the number of washers used.

[Features]
・Cost-effective
・Support sealing solutions

Select to compare

Configure now
Starting from^∗ ：	5.22 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Housing seals L Series / Internal diameter 35~155mm

SKF

[Specifications]
・Internal diameter(mm): 35~155
・Outer diameter(mm): 69.6~187.4
・Version(g): Four-lip seal
・eClass code: 23-05-17-90

SKF housing seals are the first barrier against contamination. The four-lip seals replace the former double-lip seals. The four-lip seals are more effective than the double-lip and generate less friction, which enables higher shaft speeds. For highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.

[Features]
・Good protection from contamination
・Keep the lubricant in the housing
・Part of three barrier solution

Select to compare

Configure now
Starting from^∗ ：	13.78 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Housing seals S Series / Internal diameter 25~165mm

SKF

[Specifications]
・Internal diameter(mm): 25~165
・Outer diameter(mm): 42.5~210
・Version(g): Labyrinth seal
・eClass code: 23-05-17-90

SNL housing seals are the first barrier against contamination. For applications where there are high speeds or extreme temperatures, SKF recommends using labyrinth seals, and for highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.

[Features]
・Good protection from contamination
・Keep the lubricant in the housing
・Part of the three barrier solution
・Cost-effective

Select to compare

Configure now
Starting from^∗ ：	87.17 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Oil seal B1OF Series / NBR (Perbunan) / Metal coating / Internal diameter 28mm / Outer diameter 35mm

DICHTOMATIK

[Specifications]
・Material: NBR (Perbunan)
・Version: Metal coating
・Pressure resistance: Up to 0.5 bar max.
・Internal diameter(mm): 28
・Outer diameter(mm): 35
・Width(mm): 5

Select to compare

Configure now
Starting from^∗ ：	4.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Oil seal B1SL Series / NBR (Perbunan) / Metal coating / Internal diameter 20~62mm / Outer diameter 32~80mm

DICHTOMATIK

[Specifications]
・Material: NBR (Perbunan)
・Version: Metal coating
・Pressure resistance: Up to 0.5 bar max.
・Internal diameter(mm): 20~62
・Outer diameter(mm): 32~80
・Width(mm): 7, 10

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Oil seal B2 Series / NBR (Perbunan) / Metal coating / Internal diameter 18~250mm / Outer diameter 35~290mm

DICHTOMATIK

[Specifications]
・Material: NBR (Perbunan)
・Version: Metal coating
・Pressure resistance: Up to 0.5 bar max.
・Internal diameter(mm): 18~250
・Outer diameter(mm): 35~290
・Width(mm): 8~16

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Oil seal BABSL Series / NBR (Perbunan) / Rubber coating / Internal diameter 20~80mm / Outer diameter 35~100mm

DICHTOMATIK

[Specifications]
・Material: NBR (Perbunan)
・Version: Rubber coating
・Up to 10 bar max.
・Internal diameter(mm): 20~80
・Outer diameter(mm): 35~100
・Width(mm): 6, 7

Select to compare

Configure now
Starting from^∗ ：	4.38 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Oil seal BAOF Series / NBR (Perbunan) / Rubber coating / Internal diameter 8~43mm / Outer diameter 12~53mm

DICHTOMATIK

[Specifications]
・Material: NBR (Perbunan)
・Version: Rubber coating
・Up to 0.5 bar max.
・Internal diameter(mm): 8~43
・Outer diameter(mm): 12~53
・Width(mm): 3, 4

Select to compare

Configure now
Starting from^∗ ：	1.13 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Oil seal VITSL Series / FKM (Viton) / Rubber coating / Internal diameter 8~145mm / Outer diameter 22~175mm

DICHTOMATIK

[Specifications]
・Material: FKM (Viton)
・Version: Rubber coating
・Up to 0.5 bar max.
・Internal diameter(mm): 8~145
・Outer diameter(mm): 22~175
・Width(mm): 7, 10, 15

Select to compare

Configure now
Starting from^∗ ：	9.08 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

V-ring L VIT Series

DICHTOMATIK

[Specifications]
・Internal diameter(mm): 108~425
・Width(mm): 22~272

Select to compare

Configure now
Min. Shipping Days ：	4 Days


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	NILOS RING	NILOS RING	FAG	FAG	DICHTOMATIK	DICHTOMATIK	SKF	SKF	SKF	SKF	FREUDENBERG	FREUDENBERG	FREUDENBERG	FREUDENBERG	FREUDENBERG	FREUDENBERG	FREUDENBERG	FREUDENBERG	FREUDENBERG	FREUDENBERG	FREUDENBERG	INA	FAG	FAG	INA	SKF	SKF	SKF	SKF	SKF	SKF	SKF	SKF	SKF	SKF	SKF	SKF	SKF	DICHTOMATIK	DICHTOMATIK	DICHTOMATIK	DICHTOMATIK	DICHTOMATIK	DICHTOMATIK	DICHTOMATIK
Product Series	NILOS Ring JVH	NILOS Ring ZAV	Labyrinth Seal, split	Labyrinth Seal TSV, Material: Steel, FKM	Shaft Seal, FKM, DIN 3780	Shaft Seal, NBR, CRWHA1R, CR 71002	Housing Seal	Sealing Strip	Shaft Seal, CRW1 S, VMQ	V-ring-sealing Set	Airzet Piston Seal, 80NBR186349	Airzet Piston Seal, 80NBR-B219	Double-acting Scraper, Merkel, 94AU925	Guide Ring, Piston, Polyamide-PA 4201	Simmerring, 75 FKM575	U-ring, 75FKM99104	U-ring, 90NBR109, N1	U-ring, 94AU925, AUN100	U-ring, with Wiper Lip, 95AU-V142	Wiper, with Metal Sheet, 94AU925	Wiper, without Metal Sheet, 88NBR101	Radial Rotary Shaft Seal, RWDR Series	Sealing Ring, NTC Series	V-Ring Seal, DHV Series	Seal Carrier Assembly DRS, for ZARF, ZARF..-L, with Integral Rotary Shaft Seal	End cover, for SNL bearing housings / Outer diameter 276mm	Sealing washer / Internal diameter 50mm	Housing seals A Series / Internal diameter 90mm	Housing seals C Series / Internal diameter 85mm	Housing seals CE Series	Housing seals F Series / Internal diameter 50mm	Housing seals L Series / Internal diameter 40mm	Covers, Caps / Outer diameter(40~256mm)	Spacing Washer ZW-type / Width 2mm	Housing seals C Series / Internal diameter 20~140mm	Housing seals F Series / Internal diameter 20~50mm	Housing seals L Series / Internal diameter 35~155mm	Housing seals S Series / Internal diameter 25~165mm	Oil seal B1OF Series / NBR (Perbunan) / Metal coating / Internal diameter 28mm / Outer diameter 35mm	Oil seal B1SL Series / NBR (Perbunan) / Metal coating / Internal diameter 20~62mm / Outer diameter 32~80mm	Oil seal B2 Series / NBR (Perbunan) / Metal coating / Internal diameter 18~250mm / Outer diameter 35~290mm	Oil seal BABSL Series / NBR (Perbunan) / Rubber coating / Internal diameter 20~80mm / Outer diameter 35~100mm	Oil seal BAOF Series / NBR (Perbunan) / Rubber coating / Internal diameter 8~43mm / Outer diameter 12~53mm	Oil seal VITSL Series / FKM (Viton) / Rubber coating / Internal diameter 8~145mm / Outer diameter 22~175mm	V-ring L VIT Series
CAD
Starting from^∗	-	-	624.25 € *Unit price with basic configuration Volume Discount	40.07 € *Unit price with basic configuration Volume Discount	556.05 € *Unit price with basic configuration Volume Discount	4.47 € *Unit price with basic configuration Volume Discount	18.67 € *Unit price with basic configuration	16.22 € *Unit price with basic configuration	22.93 € *Unit price with basic configuration	21.78 € *Unit price with basic configuration	7.30 € *Unit price with basic configuration Volume Discount	7.98 € *Unit price with basic configuration Volume Discount	4.68 € *Unit price with basic configuration Volume Discount	5.17 € *Unit price with basic configuration Volume Discount	50.10 € *Unit price with basic configuration Volume Discount	18.47 € *Unit price with basic configuration Volume Discount	11.14 € *Unit price with basic configuration Volume Discount	3.82 € *Unit price with basic configuration Volume Discount	9.40 € *Unit price with basic configuration Volume Discount	11.13 € *Unit price with basic configuration Volume Discount	12.70 € *Unit price with basic configuration Volume Discount	5.57 € *Unit price with basic configuration Volume Discount	383.25 € *Unit price with basic configuration Volume Discount	62.38 € *Unit price with basic configuration Volume Discount	93.63 € *Unit price with basic configuration Volume Discount	274.77 € *Unit price with basic configuration	15.95 € *Unit price with basic configuration	73.17 € *Unit price with basic configuration	86.82 € *Unit price with basic configuration	45.65 € *Unit price with basic configuration	32.82 € *Unit price with basic configuration	19.57 € *Unit price with basic configuration	3.65 € *Unit price with basic configuration	1.47 € *Unit price with basic configuration	17.22 € *Unit price with basic configuration	5.22 € *Unit price with basic configuration	13.78 € *Unit price with basic configuration	87.17 € *Unit price with basic configuration	4.02 € *Unit price with basic configuration	-	-	4.38 € *Unit price with basic configuration	1.13 € *Unit price with basic configuration	9.08 € *Unit price with basic configuration	-
Min. Shipping Days	5 Days	5 Days	4 Days	3 Days	17 Days	17 Days	12 Days	12 Days	17 Days	12 Days	7 Days	7 Days	12 Days	7 Days	17 Days	12 Days	7 Days	7 Days	12 Days	7 Days	7 Days	4 Days	4 Days	4 Days	4 Days	4 Days	17 Days	17 Days	17 Days	4 Days	4 Days	12 Days	4 Days	4 Days	12 Days	4 Days	12 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days