Filtreringsvillkor
- Shank Diameter d(mm)
- 3
- 4
- 6
- 8
- 10
- 12
- 16
- Overall Length L(mm)
- 40
- 50
- 60
- 80
- 100
- Processing Applications
- #2[0.4-16/0.01][0.4-16/0.001]
- #3[0.2-15.8/0.01]
- #4[5-85/1]
- #5[0-59/1]
- #6[0.5-48/0.5]
- F
- T
- Uppskattade leveransdagar
- Alla
- Inom 7 arbetsdagar
- Inom 8 arbetsdagar
Carbide Straight Edge Corner Angle End Mill, 2-flute / Tip Diameter Specification Type
Artikelnummer:
kandidater hittades.Skiss
Artikelnummerlista
Antal artiklar
| Artikelnummer |
|---|
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
- ( - ) | 8 arbetsdagar |
- ( - ) | 8 arbetsdagar |
- ( - ) | 8 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 8 arbetsdagar |
- ( - ) | 8 arbetsdagar |
- ( - ) | 8 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
Detaljerad information
Grundläggande information
Two products in the lineup for standard corner angle and tip diameter specification type
Specifikationer och pris
Specification Table
| Model Number | Blade Diameter D 0.005 mm Unit Specification | Tip Diameter D1 0.01mm Unit Specification | Corner Angle (Single Corner) θ °-min 1' Unit Specification | Blade Length ℓ 0.5 mm Unit Specification | Blade Shape (Selection) | Overall Length L | |
| Shank diameter d | |||||||
| BSCADC (For boss hole machining) | 3 | 0.400 to 1.500 | 0.20 ≤ D1 ≤ (D−0.2) | 5°0' to 85°0' | 0.5 to 5.0 | T (Indented Center) F (Flat) | 40 |
| 1.505 to 2.000 | 0.5 to 10.0 | 40 | |||||
| 2.005 to 3.000 | 0.5 to 15.0 | 40 | |||||
| 4 | 2.005 to 4.000 | 0.5 to 20.0 | 50 | ||||
| 6 | 3.005 to 6.000 | 3.0 to 24.0 | 60 | ||||
| 8 | 4.005 to 8.000 | 4.0 to 28.0 | 60 | ||||
| 10 | 6.005 to 10.000 | 5.0 to 35.0 | 80 | ||||
| 12 | 8.005 to 12.000 | 6.0 to 36.0 | 80 | ||||
| 16 | 10.005 to 16.000 | 8.0 to 48.0 | 100 |
| Model Number | Blade Diameter D 0.01mm Unit Specification | Tip Diameter D1 0.01mm Unit Specification | Corner Angle (Single Corner) θ °-min 1' Unit Specification | Blade Length ℓ 0.5 mm Unit Specification | Blade Shape (Selection) | Overall Length L | |
| Shank diameter d | |||||||
| SCADEM (For side/fluting) | 3 | 0.40 to 1.50 | 0.20 ≤ D1 ≤ (D−0.2) | 5°0' to 85°0' | 0.5 to 5.0 | T (Indented Center) F (Flat) | 40 |
| 1.51 to 2.00 | 0.5 to 10.0 | 40 | |||||
| 2.01 to 3.00 | 0.5 to 15.0 | 40 | |||||
| 4 | 2.01 to 4.00 | 0.5 to 20.0 | 50 | ||||
| 6 | 3.01 to 6.00 | 3.0 to 24.0 | 60 | ||||
| 8 | 4.01 to 8.00 | 4.0 to 28.0 | 60 | ||||
| 10 | 6.01 to 10.00 | 5.0 to 35.0 | 80 | ||||
| 12 | 8.01 to 12.00 | 6.0 to 36.0 | 80 | ||||
| 16 | 10.01 to 16.00 | 8.0 to 48.0 | 100 |
● BSCADC
Click here for the cutting conditions (Cutting by end mill for carbide straight edge boss machining)
● SCADEM
Click here for cutting conditions (groove cutting with customized straight blade end mill)
