- inCAD Library Home
- > No.000172 Space-Saving Long-Stroke Mechanism
No.000172 Space-Saving Long-Stroke Mechanism
26
26
Speeding up with long stroke
Related Category
Compact Cylinders
| Product name | Compact Cylinders |
|---|---|
| Part number | MSCCN20-50 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Effective for building a small-sized linear motion system
Available sizes
■Compact Cylinders Double Acting Standard Stroke Type
| Tube I.D. | External Size | Rod Tip Screw | Stroke St | Body Length (+ St shown below) | Rod Tip Length | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Screw Type | Dia. - Pitch | ||||||||||||||||
| 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | ||||||
| Ø12 | □25 | Tapped | M3 x 0.5 | ○ | ○ | ○ | ○ | ○ | ○ | - | - | - | - | - | - | 22 | 3.5 |
| Ø16 | □29 | M4 x 0.7 | ○ | ○ | ○ | ○ | ○ | ○ | - | - | - | - | - | - | |||
| Ø20 | □36 | M5 x 0.8 | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | - | - | 29.5 | 4.5 | |
| Ø25 | □40 | M6 x 1.0 | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | - | - | 32.5 | 5 | |
| Ø32 | □45 | M8 x 1.25 | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | - | - | 33 | 7 | |
| Ø40 | □52 | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | 39.5 | |||
| Ø50 | □64 | M10 x 1.5 | - | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | 40.5 | 8 | |
| Ø63 | □77 | - | - | - | - | - | ○ | - | - | - | ○ | ○ | ○ | 46 | |||
| Ø12 | □25 | Threaded | M5 x 0.8 | - | ○ | - | ○ | - | ○ | - | - | - | - | - | - | 22 | 14 |
| Ø16 | □29 | M6 x 1.0 | - | ○ | - | ○ | - | ○ | - | - | - | - | - | - | 15.5 | ||
| Ø20 | □36 | M8 x 1.25 | - | ○ | - | - | - | ○ | - | - | - | ○ | - | - | 29.5 | 18.5 | |
| Ø25 | □40 | M10 x 1.25 | - | ○ | - | - | - | ○ | - | - | - | ○ | - | - | 32.5 | 22.5 | |
| Ø32 | □45 | M14 x 1.5 | - | ○ | - | - | - | ○ | - | - | - | ○ | - | - | 33 | 28.5 | |
| Ø40 | □52 | - | ○ | - | - | - | ○ | - | - | - | ○ | - | ○ | 39.5 | |||
| Ø50 | □64 | M18 x 1.5 | - | ○ | - | - | - | ○ | - | - | - | ○ | ○ | ○ | 40.5 | 33.5 | |
| Ø63 | □77 | - | - | - | - | - | ○ | - | - | - | ○ | ○ | ○ | 46 | |||
* Sensors are sold separately
Selection steps
■Selection procedure of compact cylinders (See "Technical Information" shown below for details.)
1. Define various conditions of the load
↓
2. Calculate cylinder output (In case of double acting type)
↓
3. Determine the tube I.D.
↓
4. Determine the theoretical reference speed
↓
5. Verify the cylinder's cushion mechanism
↓
6．Verification of lateral load which is supplied to the cylinder
Performance info.
■Load Information of Compact Cylinders
Min. Operating Pressure: 0.1 MPa
Max. Operating Pressure: 1.0 MPa
Theoretical Output (N) :
| Tube I.D. | Operation Direction | Operating Pressure (MPa) | |
|---|---|---|---|
| 0.4 | 0.5 | ||
| Ø12 | Outstroke | 45 | 57 |
| Instroke | 34 | 42 | |
| Ø16 | Outstroke | 80 | 101 |
| Instroke | 60 | 75 | |
| Ø20 | Outstroke | 126 | 157 |
| Instroke | 94 | 118 | |
| Ø25 | Outstroke | 196 | 245 |
| Instroke | 151 | 189 | |
| Ø32 | Outstroke | 322 | 402 |
| Instroke | 241 | 302 | |
| Ø40 | Outstroke | 503 | 628 |
| Instroke | 422 | 528 | |
| Ø50 | Outstroke | 785 | 982 |
| Instroke | 660 | 825 | |
| Ø63 | Outstroke | 1247 | 1559 |
| Instroke | 1121 | 1402 | |
Floating Joint
| Product name | Floating Joints -Extra Short Threaded Stud Mount/Threaded |
|---|---|
| Part number | FJCMX5-0.8 |
| Features | Floating joints that can be used where there is little distance between cylinders and moving objects. |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Suitable for absorbing deviations in the radial direction.
Available sizes
■Floating Joint Extra Short Lateral Misalignment Angular Misalignment Tolerant Threaded Stud Mount - Threaded (for Tapped Cylinder)
| Body / Cover | Joints | Spring | Washer | |||||
|---|---|---|---|---|---|---|---|---|
| Material | Surface Treatment | Material | Surface Treatment | Hardness | Material | Material | Surface Treatment | Hardness |
| EN 1.1191 Equiv. | Black Oxide | EN 1.1191 Equiv. | Black Oxide | 35 - 45 HRC | EN 1.4301 Equiv. - WPB | EN 1.4301 Equiv. | Nitriding Treatment | 600HV - |
| EN 1.4301 Equiv. | - | EN 1.4125 Equiv. | - | |||||
■Sizes
| Cylinder Mounting Side | Output Side | Allowable Misalignment [U] | Allowable Angular Deviation [A] | Body Thickness | Body Hex size | Overall Length | ||
|---|---|---|---|---|---|---|---|---|
| Screw Dia. - Pitch | thread length | Screw Dia. - Pitch | thread length | |||||
| M5 - 0.8 | 6 | M8 - 1.25 | 8.5 | 0.5 | 4° | 14 | 24 | 33 |
| M6 - 1.0 | ||||||||
| M8 - 1.25 | 8.5 | M10 - 1.5 | 10 | 15.5 | 27 | 39.5 | ||
| M10 - 1.5 | 10 | M14 - 2.0 | 11 | 19.5 | 30 | 47 | ||
< Allowable lateral misalignment U and allowable angular misalignment A >
-
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
- 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances). - 5. Policy of Third Parties
- You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.
CAD Data Download (Unit Assembly)
CAD Data Download: File Format
Cautions on the CAD data
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
The CAD data unit assembly consists of sub-assemblies.
Each sub-assembly unit can be used as it is or can be edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly CAD data consists of some sub-assemblies.
Each sub-assembly unit can be used as it is or can be edited.
Application Overview
Purpose
- Purpose
- The lift stroke mechanism retracts to a height below the roller conveyor height (H = 162mm) and advances upward by 100mm up to the processing position when receiving and passing a workpiece on the pallet.
- Operation
- By using air cylinders and linear guides in combination, the length of the mechanism in the movement direction is shortened while it moves upwards through a long stroke.
Target workpiece
- Shape: box shape workpiece
- Size: W100 x D80 x H50mm
- Weight: 1kg
Design Specifications
Operating Conditions or Design Requirements
- Ascending / descending stroke: 100mm
- Cylinder stroke: 50mm
- Tube inner diameter: Ø20mm
- Cylinder output: 126 x 70%N (Applied pressure 0.4MPa)
- Outer dimensions: W230 x D105 x H157 (H245 when ascended)mm
Required Performance
- Running parallelism: 15 x 2 = 30µm
- Allowable Load: 60N
Selection Criteria for Main Components
- Air Cylinder
- Stroke of 50mm or longer and output of 30N or above
Design Evaluation
Verification of main components
- A cylinder is selected so that the force required for raising the workpiece is obtained.
- Ascending output
- Conditional value: target workpiece mass: M1 = 1kg, ascending structure mass: M2 = 2kg, ascending stroke: L = 100mm, gravitational acceleration g = 9.8m/s², air pressure: a = 0.4MPa, cylinder load factor: η = 70% = 0.7
- Load applied during ascending: W = W1 + W2 = M1 x g + M2 x g = 1 x 9.8 + 2 x 9.8 = 9.8 + 19.6 = 29.4N
- Required cylinder thrust: P = W / η = 29.4 / 0.7 = 42N
⇒A cylinder with a cylinder inner diameter of Ø12mm or higher is selected. - Stroke: L = 100mm, stroke required for each cylinder: L' = L / 2 = 100 / 2 = 50mm
⇒A standard cylinder with a stroke of 50mm and an inner diameter is Ø20mm is selected. - Based on the thrust of a cylinder with a Ø20 inner diameter mm: P', the allowable ascending load: W' is verified.
P'= π / 4 x 20² x 0.4 = 126N
W' = P' x η - W2 = 126 x 0.7 - 19.6 = 68.6N
⇒Allowable ascending load: W' = 68.6N
Other Design Consideration
- When selecting a 100-mm stroke, the cylinder tube inner diameter as well as outer dimensions become larger.
A linear guide that needs to have a length equivalent to the stroke + the guide also becomes longer, making it difficult to be installed in a structure that necessitates escaping. Therefore, this mechanism is effective for space-saving.
Explore Similar Application Examples
Page
-
/
-
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.