Holding Tools for I.D. Tuning

• 

  BIG KAISER

  EWN Boring Head Set (For Finishing / Round Bit Type)

  [Specifications]・Applicable Tip Shape: T (Triangle)・Application: Internal Diameter・Minimum Machining Diameter: 1・L(mm): 28.5, 36, 45・Lubrication Hole Y/N: Available[Features]・Fine boring head in integral, modular, and screw-on execution for the precise machining of bores

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	1	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  440.00 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Steel Blank with Coromant Capto Coupling

  [Specifications]・Type: Blank, Molding blank・Coolant: No・Cutting Direction: Neutral・eClass-5.1: 21021105, 21029112

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	IKOU	-	60 ～ 200	-	32 ～ 160	-

  Ordinarie pris (exklusive MOMS):

  336.15 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK CoroTurn 111 Boring Bar for Back Boring

  [Specifications]・Type: Boring bar・Minimum Machining Diameter:21.59mm・Cutting Direction: Right-hand・Overall Length L1: 203.2mm・Clearance angle: 11º ・eClass-5.1: 21010903[Features]・Positive insert shape・Low cutting forces・Excellent edge strength・Screw clamping ensures stability and unobstructed chip flow・Tools with high pressure coolant・Insert geometries and grades for all materials

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	21.59	-	Right-hand	-	203.2	-	15.88	-

  Ordinarie pris (exklusive MOMS):

  194.38 €

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  • Volume Discount

  BIG KAISER

  Insert Holder For EWN Boring Head Replacement

  [Features]Combining the head and insert holder makes it possible to secure a cutting chip pocket. Designed for improved cutting chip discharge. For EWN head

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	-	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  65.54 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SHOWA TOOL

  Twin Cut

  [Features]· New modular type designed specifically for ease of use· The employment of a serration mechanism with a new connection method using draw bolts drastically improves rigidity and allows for use in heavy-duty cutting.· The balanced cut allows for use in heavy-duty cutting.· Connecting extensions allows you to freely drill even deep holes.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	ø25 ～ ø125	-	-	-	-	-	24 ～ 82	120 ～ 330

  Ordinarie pris (exklusive MOMS):

  339.14 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  BIG KAISER

  SW Boring Head (Rough Highly Rigid Type)

  [Features] They can be used for BBT/BT shafts with double contact. [Features] They are a high rigidity type for roughing and can also be used for machining flat bearing surfaces.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	20 ～ 148	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  327.00 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  BIG KAISER

  EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)

  [Features]· With excellent dynamic balance, it achieves high-speed processing and stable precision.· Automatic balance compensation.· Accurate φ0.01 mm unit scale ultra-precision head.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	32 ～ 85	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  1,145.00 €～

  Ordinarie avsändningsdatum:

  10 arbetsdagar

  Konfigurera
• 

  BIG KAISER

  EWN Boring Head Set (For Finishing / Insert Holder Type)

  [Specifications]・Applicable Tip Shape: T (Triangle)・Application: Internal Diameter・Compatible Tip: TP08, TC11・Lubrication Hole Y/N: Available[Features]・The EWN single cutter boring tool program for fine boring covers a range of Ø 20-203 mm with only 7 fine boring heads・Due to the optimized balance over the whole adjustment range, cutting speeds up to 1200 m/min are permitted

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	20 ～ 100	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  684.14 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	19 ～ 136	Internal Diameter	-	Screw-on	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  1,352.63 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Cylindrical Shank to CoroTurn SL Quick Change Damped Adaptor

  [Specifications]・Type: Boring bar, Vibration-damped boring bar・Cutting Direction: Right-hand, Neutral・eClass-5.1: 21021105

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	99.9998 ～ 275	-	Right-hand / IKOU	-	880 ～ 4000	-	11.6 | 80 ～ 80 | 250	-

  Ordinarie pris (exklusive MOMS):

  7,103.08 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK CoroBore 826 Fine Boring Head

  [Specifications]・Type: Fine boring head・Minimum Machining Diameter: 150mm・Overall Length L1: 24mm・Shank diameter: 34mm・eClass-5.1: 21021105[Features]A34-R826C-E024HP:・The CoroBore XL system for large-diameter rough boring gives a rigid and reliable performance in larger bores and is designed to generate the required hole quality and diameter. The bridges and holders enable rough boring to be completed with high productivityA34-R826C-E 017:・The CoroBore XL system is a group of large-diameter boring tools. The wide application range covers rough and fine boring, interpolation turning as well as face grooving and the unique SpiroGrooving method

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	150	-	-	-	24	-	34	-

  Ordinarie pris (exklusive MOMS):

  1,645.69 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning PDUNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	32 ～ 63	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  503.21 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Sandvik COROMANT CAPTO Manual Clamp Holder

  [Features]· Clamping unit.· Features the high precision and rigidity of Coromant Capto. Can be used for quick changes.[Applications]· For any turning.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  1,954.35 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Coromant Capto to Damped Arbor Adaptor

  [Specifications]・Type: Dampened milling adapter・Cutting Direction: Neutral・Coolant: Yes・eClass-5.1: 21021105

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	IKOU	-	130 ～ 400	-	16 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  5,059.85 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK T-Max P Head for Turning

  [Specifications]・Type: SL Quick Change cutting head, SL cutting head・Bracket Clamping technology: RC clamping・Cutting Direction: Right-hand, Left-hand・Minimum Machining Diameter:: 40, 52, 55, 57, 100mm・eClass-5.1: 21010903

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	40 ～ 100	-	Right-hand / Left-hand	-	-	-	32 ～ 80	-

  Ordinarie pris (exklusive MOMS):

  425.31 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max U Fine Boring Unit

  Unique shape exhibits high performance

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Right-hand / Left-hand	-	24.1 ～ 62.7	-	16 ～ 32	-

  Ordinarie pris (exklusive MOMS):

  715.42 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Solid-Carbide Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SCLPR / L

  CoroTurn 111 carbide boring tool bit for inner diameter machining with long runout and unstable machining conditions

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	10 ～ 16	Internal Diameter	Right-hand / Left-hand	Screw-on	125 ～ 180	11°	8 ～ 12	48 ～ 72

  Ordinarie pris (exklusive MOMS):

  362.20 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Coromant Capto to Fine Boring Head Adaptor

  [Specifications]・Type: Fine boring head・Processing type: Finishing-bore tolerance IT6・Minimum Machining Diameter: 3mm・Cutting Direction: Neutral・eClass-5.1: 21021105

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	3	-	IKOU	-	48 ～ 85	-	-	-

  Ordinarie pris (exklusive MOMS):

  1,245.23 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Coromant Capto to Weldon Adaptor

  [Specifications]・Type: Adapter・Cutting Direction: Neutral・Coolant: Yes-through center・eClass-5.1: 21021105

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	IKOU	-	-	-	6 ～ 50	-

  Ordinarie pris (exklusive MOMS):

  448.69 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK HSK to Coroturn SL Adaptor

  [Specifications]・Type: Adapter・Cutting Direction: Right-hand, Neutral・External or internal machining: Internal machining・eClass-5.1: 21021104[Features]・Solid steel and carbide reinforced adapters・All types of adapters have internal coolant supply

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	Right-hand	-	-	-	32 | 63 ～ 40 | 100	-

  Ordinarie pris (exklusive MOMS):

  923.69 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Coromant Capto to CoroTurn SL Damped Adaptor

  [Specifications]・Type: Boring bar, Vibration-damped boring bar・Cutting Direction: Right-hand, Left-hand, Neutral・Minimum Machining Diameter: 20-80mm・Overall Length L1: 125-968mm・eClass-5.1: 21021105[Features]・Modular system of adapters and cutting heads・For internal turning, grooving, threading, boring and multi-task machining・For hole diameters down to 20 mm・For machining in turning centers, lathes and multi-task machines・CoroTurn SL cutting heads feature precision coolant nozzles for improved chip control and process security ・Quick change cutting heads as an option – easy-to-adjust cutting head for more flexible production

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	20 ～ 80	-	Right-hand / Left-hand / IKOU	-	125 ～ 968	-	16 ～ 60	-

  Ordinarie pris (exklusive MOMS):

  1,468.85 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Coromant Capto Adjustable Adaptor with Quick Change

  [Specifications]・Type: Adapter with quick-change adapter・Cutting Direction: Neutral・Processing type: Interpolation turning - Finishing・Overall Length L1: 150mm・eClass-5.1: 21021105[Features]・The CoroBore XL system is a group of large-diameter boring tools. The wide application range covers rough and fine boring, interpolation turning as well as face grooving and the unique SpiroGrooving method・Reliable system with rigid interfaces between head and cartridge for stable and vibration-free boring・Optimized cartridges designed for highest stability・Internal coolant through the tools to the cutting edge・Silent Tools damped adapters designed for vibration-free large-diameter boring

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	IKOU	-	150	-	-	-

  Ordinarie pris (exklusive MOMS):

  2,645.38 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK CoroThread 266 Boring Bar for Thread Turning

  [Specifications]・Type: Boring bar・Cutting Direction: Right-hand, Left-hand・Bracket: Clamping technology: Screw clamping system・External or internal machining: Internal machining・eClass-5.1: 21010903[Features]・Highly rigid external and internal thread turning・Optimize your tool path・iLock interface・Precision coolant solution

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	20 ～ 63	-	Right-hand / Left-hand	-	125 ～ 406.4	-	15.88 ～ 50.8	-

  Ordinarie pris (exklusive MOMS):

  247.00 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  BIG KAISER

  EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In)

  [Features]· The internal weight can be adjusted manually by turning the balance ring.· Manual balance adjustment mechanism. 5 μm/φ scale precision diameter adjustment mechanism (EWB2-50 only).

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	1	Internal Diameter	-	-	-	-	50 ～ 63.5	-

  Ordinarie pris (exklusive MOMS):

  1,575.00 €～

  Ordinarie avsändningsdatum:

  10 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max P, Boring Tool Bit, Negative Inserts, Diamond 80° Compatible, A-PCLN

  First recommendation for general turning for medium to large partsInserts with crushers and materials for all machining areas.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	20 ～ 63	Internal Diameter	Right-hand / Left-hand	Lever lock	200 ～ 350	0°	16 ～ 50	64 ～ 200

  Ordinarie pris (exklusive MOMS):

  354.09 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroCut MB Adapter for Small Lathe

  Unique shape exhibits high performance

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Right-hand	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  197.64 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CORO-TURN SL, 570-Type Cutting Head

  CoroTurnSL is a modular system of adapters and cutting heads that enables the construction of customised tools for a variety of turning operations with a minimum number of parts

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	50 ～ 80	Internal Diameter	Right-hand / Left-hand	-	32 ～ 40	-	40 ～ 60	-

  Ordinarie pris (exklusive MOMS):

  435.21 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cutting Head for CORO-TURN SL CORO-TURN 107

  For turning slim parts with inner and outer diametersThe plate change with high repeatability improves productivity and achieves high quality.

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	20 ～ 32	Internal Diameter	Right-hand / Left-hand	Screw-on	-	-	16 ～ 25	20

  Ordinarie pris (exklusive MOMS):

  348.52 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge CoroTurn 107 Screw Clamp STFCR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	20 ～ 55	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	25 ～ 63	-	-	-

  Ordinarie pris (exklusive MOMS):

  242.84 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn XS Insert Bar For Grooving CXS-..G

  [Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor groovingGroove width: 1.5 mm

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	4.2 ～ 7.2	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	-	27.3 ～ 57.8	-	4 ～ 7	-

  Ordinarie pris (exklusive MOMS):

  59.94 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn XS Insert Bar For Face Grooving CXS-..F

  [Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor face groovingGroove width: 1.0 mm

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	6.2	Internal Diameter	Right-hand / Left-hand	-	37.3	-	6	-

  Ordinarie pris (exklusive MOMS):

  76.70 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  T-Max P Inner-Diameter Boring Bit PCLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	25 ～ 63	Internal Diameter	Right-hand / Left-hand	Lever lock	200 ～ 350	-	-	34 ～ 45

  Ordinarie pris (exklusive MOMS):

  550.43 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Cartridge T-Max P Lever Clamp For Negative Inserts PTFNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	50 ～ 70	Internal Diameter	Right-hand / Left-hand	Lever lock	55 ～ 70	-	-	-

  Ordinarie pris (exklusive MOMS):

  253.73 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn HP SL Cutting Head PCLN

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	34 ～ 56	Internal Diameter	Right-hand / Left-hand	Lever lock	28 ～ 42	-	25 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  523.29 €～

  Ordinarie avsändningsdatum:

  8 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDUCR / L-X

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	22 ～ 50	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	-	-	16 ～ 40	-

  Ordinarie pris (exklusive MOMS):

  383.32 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  CoroTurn SL - Coromant Capto Adapter, Cx-570-R / LG-045

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	-	-	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  729.67 €

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning DCLN / DDUN

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	25 ～ 50	Internal Diameter	Right-hand / Left-hand	Cable clamp	-	0°	-	-

  Ordinarie pris (exklusive MOMS):

  503.21 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning PCLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	25 ～ 63	Internal Diameter	Right-hand / Left-hand	Screw-on	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  503.21 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning PWLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  W (Hexagonal Type)	32 ～ 40	Internal Diameter	Right-hand / Left-hand	Screw-on	-	-	-	-

  Ordinarie pris (exklusive MOMS):

  753.89 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Fine Boring Head, Coromant Capto / HSK

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	3	Internal Diameter	-	-	-	-	12 ～ 20	-

  Ordinarie pris (exklusive MOMS):

  1,241.81 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  Boring Bar For Fine Boring Head, R429.90 / R249U

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	3 ～ 26	Internal Diameter	Right-hand	Pin Lock	-	-	12 ～ 20	-

  Ordinarie pris (exklusive MOMS):

  244.42 €～

  Ordinarie avsändningsdatum:

  6 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Coromant Capto Reduction Adaptor

  [Specifications]・Type: Reducing adapter, Reducing element・Cutting Direction: Neutral・Coolant: Yes-radial KSS, Yes-through center・eClass-5.1: 21021105[Features]・Three systems in one・High torque transmission・High bending strength・Quick change and automated tool change・Advanced nozzle technology for process security even at low pressures・Through-tool delivery of high-pressure coolant, from machine to cutting edge・Balanced and concentric・Self-centering

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	IKOU	-	90 ～ 110	-	-	-

  Ordinarie pris (exklusive MOMS):

  473.54 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK CoroTurn 107 Boring Bar for Turning

  [Specifications]・Type: Boring bar・Cutting Direction: Right-hand, Left-hand, Neutral・For turning・eClass-5.1: 21010903

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	8.6868 ～ 64.7954	-	Right-hand / Left-hand / IKOU	-	80 ～ 355.6	-	6.35 ～ 50.8	-

  Ordinarie pris (exklusive MOMS):

  194.38 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK CoroTurn SL Quick Change to Rectangular Shank Adaptor

  [Specifications]・Type: Adapter・Cutting Direction: Right-hand・External or internal machining: Internal machining・Coolant: No・Shank diameter: 80mm・eClass-5.1: 21010903

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	Right-hand	-	-	-	80	-

  Ordinarie pris (exklusive MOMS):

  910.54 €

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera
• 

  SANDVIK

  SANDVIK Coromant Capto to Coromant EH Damped Adaptor

  [Specifications]・Type: Vibration-damped boring bar・Cutting Direction: Neutral・Coolant: Yes・eClass-5.1: 21021105Productivity with integrated machine adapters: The short gauge length of an integrated machine adapter plus cutter head makes it possible to increase productivity even in small, vibration-sensitive machines

  Mer information

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	IKOU	-	175 ～ 420	-	-	-

  Ordinarie pris (exklusive MOMS):

  6,388.38 €～

  Ordinarie avsändningsdatum:

  5 arbetsdagar

  Konfigurera